When I download presets from the My Marshall website, how can I then transfer/import them to either the Gateway on my iPad, or to the Code 25 amp itself?

I can control the amp from the iPad, but it will only let me use the 99 presets already loaded.

Please read this post in the spirit in which it is posted.

I monitor these forums regularly as I have five Marshall CODE amps. and I guess I like to see what's going on and stay up-to-date.  And I suppose I enjoy sharing my knowledge and helping others where I can.  I must also note that I've not had any of the issues described on these forums with any of my CODE amps.  And I must also note that I think they're the best modelling amps. around i.e. they're Marshalls and enough said.

But what concerns me (and hence this post) is this: there really does seem to be a lack of interest on the part of Marshall Amplification when it comes to the CODE range (at least here on the forums i.e. if emailing Technical Support yields different results then I do apologise) (and given the fact that I've had no issues at all with any of my CODE amps., as noted above, I've never had to contact Technical Support so I would not know).  It's almost as if Marshall regret the day they got into this modelling business (and if that's not the case: sorry but that's my personal impression at the moment after, what, around eighteen months or so of monitoring these forums???).  I mean to say: there are so many posts around here (dating back) asking for feedback re: apparent bluetooth issues, projected dates for new firmware updates, etc. etc. etc.  And no answers.  There's even been one or two posts asking if Marshall is going to continue with the CODE range or if it's something they want to get away from.  No answer.  I think you get the picture.

The above being said: I do understand how frustrating it must be to be asked the same old questions over and over and over again ESPECIALLY when a forum member couldn't even be bothered to search the forums for an answer before posting and asking a question or before reading the manual.  Hell: if I had a few USD or GBP or EUR for every time I've answered a question on here re: standalone software to control these amps. well, then, I'd probably buy some more CODE amps.!!!  LOL!!!  Point is and all jokes aside: I do get it.  But it's no excuse for a lack of response on some very key issues (like those mentioned above).  And what's more: for some they're not asking for favors i.e. they're quite willing to help themselves but need a little bit of input (the Master Volume issue comes to mind here) and they just don't get that input.  And (back to the firmware issue): some are even prepared to roll back their firmware to a previous version as (apparently)  some issues were not issues in previous versions i.e. they're not even insisting that a new, immediate, firmware update with fixes is made available.  Fairer than that I don't think they could be.  But: no response (or, in some cases, a very non-committal response anyway).

In closing: I don't know if I'm correct in my assumption that Marshall isn't too interested in this CODE range of amps.  I also don't know if, maybe, this (perceived on my part anyway) lack of interest is because this particular market is quite tough nowadays (what with other modelling amps. and a plethora of plugins and the rest of the junk out there) and maybe the core business (the more expensive and professional products) is being conentrated on and these CODE amps. are just an irritation.  But you need to know this (as I have noted already): they are STILL Marshall amplifiers.  And there is nothing on the market (whether it be another modelling amp. or a plugin) that sounds like these amps. (or, at very least, comes as close to emulating the more expensive and professional Marshall valve amps.).  So they are actually something to be proud of Marshall.  Just bear this in mind going forward.

As I said: please read in the spirit in which this is being posted.

No response is necessary either.  But please do take cognisance of what I've posted above going forward.

Regards,

Dale.

Does Marshall have a customer service  number?  Problems with a code 50 amp cutting out..been doing it since a week after i couldn't  return it. 

please help me! i've tried asio4all spend hours to try but always that anoying latency

Looking for a tone close to guitar in No Doubt "Im Just a Girl". Any ideas.

I have a Marshall MG15 FX amp. The Volume potentiometer is defective. Which potentiometer to buy for subsitituition?

Thanks A Lot

Is there any news of a new preset package getting released by Marshall. Surely someone around the office tinkers with the code amps and has some nice usable patches to release :)

The 02 Slapback is not functioning.  When I chosen, I must turn guitar volume to maximum and you can barely hear it.  This is the only preset that has this issue.  Please help!  My Code 50 is less than a year old.

Tom Meador

I've connected my Code Head 100 to my computer but it wont let me play through Ableton?

The video on my Marshall website seems easy enough to follow but it just won't work!

The CODE 100 isn’t have a line out ????

I see just Send/Return, the out 8Ω and the F/C I believe only to footswitch..

I have noticed that when playing my amp at low volumes, the volume starts to drop out.  I thought it was a temperature thing as it started in june when it was really hot.  but it is still doing it.

Most noticeable on OD1 and 2.

thanks

Gordon 

Hey Marshall,

I visited the dealer recently and tried another CODE 25 amp in the shop with the same latest FW version.
The same bluetooth behavior was observed (as described in many threads here, for example this ).
If you insist that it's a HW problem - please make an official statement that CODE 25 amps with serial numbers XX-XX have faulty Bluetooth Modules and you would like to recall/replace it. I think you can easily check your production and make a quality check on this case.

I think there are only few ways forward:

-  a FW update with a fix, promised a long time ago. Is it really so hard to rollback a piece of code, revert some changes from the latest FW update? 

- official recall, so that we just return it and get a 100% working unit instead.

- make the firmware code open source, so that we could fix it ourselves and make further improvements.

Regards,
Ilya

Ny date of birth a weiting weong, how can I change it?

HI 

Everytime i go to upload a preset it comes back with an internal server error? It publishes to my library but not the user preset section. Whats the go there?

Cheers

Is there a available dust cover for a Marshall Origin 50H head?

Is there a available dust cover for a Marshall Origin 50H head?

Hey, I have a Marshall JCM 900 HI Gain Dual Reverb and I want to find out the date it was made, I dont really have any reason just for funs sake but i cant understand how it works. All sites I've visited has said that it should be a sticker with a barcode but i cant find any, all I find is what I think is the serial number, the numbers are "Y41720" so if anyone know what that says or have any tips on where to find the real serial number if that isn't please let know thanks! P.s my cameras broke so I cant post any pictures but if you really need I can solve it!

MY CODE 50 SEEMS TO CRASH EVERY NOW AND AGAIN WHEN IM PLAYING IT. ITLL PLAY FINE FOR ABOUT 30 MIN OR SO AND GIVE ME THIS DIGITAL FEEDBACK AND THEN JUST CRASH AND MAKE THIS BAD STATIC SOUND. I HAVENT UPDATED IT YET BUT DIDNT THINK I WOULD NEED TO BEING THERE FAIRLY NEW SO WHAT SHOULD I DO BECAUSE THIS IS GETTING VERY ANOYING 

AND ALSO IVE NOTICED THAT IT GIVES ME THIS FUZZY FEEDBACK WHEN ANY OF THE PEDALS OR EQ IS ON ( DELAY, DISTORTION, SUSTAIN EXC ) BUT JUST PLAYING THREW A CLEAN CHANNEL OR AN OVERDRIVE CHANNEL WITH NO DISTORTION PEDAL IT WORKS FINE NO FEEDBACK OR ANYTHING 

Hi, all.

When I choose "Natural" in preamp section, BASS and MIDDLE knobs work in normal way, but TREBLE doesn'tchange EQ at all. I've checked it on two CODE 25 amps - in both cases this issue appears. As all other preamps work OK, so I assume it's a software problem. Am I right?

Regards, Jacek.

Hi there

I bought the PEDL91003 to replace my fourway footstomper which takes up too much room but it doesn't seem compatible with the MG30 CFX amp even though the suppliers are telling me it is ! Power is getting through to one side but the buttons don't change the channel - Any ideas ??

cheers

Kevin