Questions
Showing results 21 to 37 of 37
2

votes

2

answers

992

views

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

 

asked 24 Jan 2019 at 11:09 AM

Jacek Klimkiewicz (170)
1

vote

0

answers

796

views

1) Bought Code new, when released, USB port was loose and wont connect. Cant do Firmware or recording via USB. How to get service?

 

got at Guitar Center San Mateo Ca. When first released, hadn't ever really used USB, but realizzed it is messed up, like port is disconnected or broken. USB is wiggles and no connection. 

 

2) Cant get Gateway to Recognize tye Amp while BT stream audio okay. tried all steps from this site cleared phone and cache, removed and reinstalled, no diifference. Multiple versions of Android. 5 to 8.

Thanks,

James

asked 01 Jan 2019 at 07:22 PM

James Graham (12)
0

votes

1

answer

819

views

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

edited 17 Dec 2018 at 06:02 PM

Saloni kamalsagar

asked 16 Dec 2018 at 11:46 AM

Saloni kamalsagar
0

votes

1

answer

626

views

Hello, I have acquired the CODE 25, really an excellent amplifier, very versatile and very good presets. My problem and please I hope you help me to resorve it, is that even though I can connect via Bluetooth, I can listen to my tracks ....... the big problem is that when I want to use the FX or presets it appears that there is no amplifier connected ... (either from my android phone or my Ipad I ... I do not understand what the problem is.) Secondly, when I want to install the MARSHALL FIRMWARE UPDATE UTILITY, to enter presets or update the ampli, does not recognize the connection.I request guidance to be able to make full use of such a beautiful tool for my music.I use Widows 10 and G. Chrome.For your attention, thank you very much

asked 16 Oct 2018 at 05:55 AM

Luis Ernesto Espinoza Guerra
0

votes

1

answer

720

views

Hi, i have a Marshall Code 50. I tried to record with usb input but there is a lot of noise (interference) every 10-15-20 seconds (random).

I have high quality cable and a yamaha RGX A2. With the oldest firmware version it was noisier, now with the v1.41 is better but how can I fix?

Any suggestions?

 

Sorry for my english.

 

Thank you.

asked 01 Jun 2018 at 07:04 PM

edoardo bertilaccio
0

votes

0

answers

787

views

Hi! Just bought the CODE 25 amp and I've put the firmware up to date, everything seems to be ok but when I unplug the USB, the LCD reads "CHK USB". I turn it off then on, try to unplug and replug and still read CHK USB and the amp doesn't work.

Thanks for your answers

 

asked 13 Apr 2018 at 08:48 PM

Francois Hamel
0

votes

1

answer

850

views

I'm using the USB connection from a PC to the Code 25, and found that the ouput sound on the headphones is only mono-left mixed.  I get sound in both speakers on my headset, but when I test left/right channels, it's obvious that the sound is only coming from left channel.

This isn't an issue when I'm playing music through the Bluetooth connection, and both left/right channels come through ok.

Is there a firmware fix so that when sound is channeled through USB to the headphone 3.5mm jack, it'd be stereo instead of mono-mixed?

asked 05 Apr 2018 at 07:59 AM

Alvin Tang
0

votes

3

answers

844

views

Just bought the 50.  I have done the hold the 3 buttons down while turning it on to see the current version.  I then connect the USB and it says USB connected Ready to update.  But when I try to update from both the browser and the utility, it says "please connect your code".  I have made the config changes on the troubleshooting site, and used 2 different laptops and 3 different cables but none of them will push the updates.  It won't show the Code as being connected for some reason. 

Anyone have an idea of where I am going wrong?  I don't have any Chrome updates to do, and I am stumped.  I don't want to have to return this if there is an easy fix.

Thanks in advance!

asked 24 Feb 2018 at 07:17 PM

greg anderson
2

votes

3

answers

4.3k

views

Hello Team,

I just bought the Marshall Code25 and tried to update the Firmware via USB.

I have launched the firmware update from the Chrome Navigator and from Windows firmware application. After update performed, Code25 remains to version 1.11 and firmware indicates my CODE firmware is up to date. 

I have notice during the update than first, the version 1.41 is installed (MCU firmware 1.41) and just after a second update is launched installing the version 1.11 (DSP firmware 1.11)

Is it the regular behavior ?

After the update I still have troubles on bluethooth pairing, even if I read this problem should be solved by the update.

Thanks for your help

Regards

 

 

asked 04 Jan 2018 at 12:22 AM

Viguier Benjamin (2)
0

votes

1

answer

1k

views

Hi,

My son has a Code 25 and the preset knob stopped working i had a look at it last night and tried the firmware update from the web site now it wont do anything and just says check USB. has anyone had this problem or have a solution.

thanks in advance

Alex

 

asked 26 Dec 2017 at 11:47 AM

piers lee
1

vote

1

answer

1.5k

views

Promises, promises ... "we'll fix it soon";  " bluetooth issues will be addressed in future firmware updates";  " USB recording issues will be looked into"; AND, a 2-way footswitch will be available for Code 25/50 users when Code 100 is released.  Am I alone in my disappointment for Marshall's seemingly apathetic (non) responses to purchasers of their "not ready for prime time" digital products?!?!?!   I really wanted a Marshall Amp after 45 years as a Fender user.  My mistake.  I should have known better.  Useless, unsupported, glitched, buggy, unreliable, etc., etc., etc.    What say you Marshall in an attempt to save any reputation you thought you had?!?!?!?

asked 05 Apr 2017 at 06:08 AM

S Fisher (6)
0

votes

0

answers

1k

views

I was using the usb connection to record on Audacity.  The guitar I was using was a Fender Strat with noiseless pups.  I found that the signal stregth was really low and the only way I could get a decent recorded signal was to turn up the master volume to an unbearable level and was close to getting a stern talking to from my better half.  I then tried the same process but used some headphones and this sorted the level issue so it recorded a strong signal.  There was still a bit of crackle on the recording but much improved from the last firmware release.  

I then recorded some acoustic guitar without headphones.  This was a martin DRs1 with a stock fishman pup.  Signal strength was really good and the quality was great.  No hum or hiss or crackle.

Great to hear others experiences.

asked 21 Dec 2016 at 04:56 PM

Nigel Grimshire (2)
0

votes

1

answer

1.7k

views

I can download and run the firmware updater on my Win 10 laptop - it then asks me to connect my CODE 25 amp. I connect the amp using a USB cable - then I see the message "An error occurred: An error occurred getting the device information from your CODE. Please try switching your amp off, and then switching it back on again."

I switch it off and on - no good. Same problem. I connect the CODE amp before running the firmware utility - same result. So I don't even know what firmware is currently in there. Is this solvable? BTW - the USB cable works, as my Marshall CODE Live Editor has connected to the amp using it.

Thx

asked 08 Dec 2016 at 01:35 PM

Gavin Wright
1

vote

4

answers

1.2k

views

I'm using Windows 10, and the Amp says "USB" when plugged into PC.  I installed the window app, but all it says is "please connect your Code..,".    I checked device manager and it says " Unknown USB device (device descriptor request failed).   I tried uninstall, reboot, reload, etc., and different USB ports ,but nothing works.   

asked 08 Oct 2016 at 10:02 PM

David Goodrich (1)
2

votes

3

answers

3.2k

views

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues?  Thank you. 

asked 05 Sep 2016 at 05:35 PM

S Fisher (6)
6

votes

2

answers

1.7k

views

noticed people having interferance issues with the usb connection like me. was just wondering how you guys are comming along with the firmware application for windows and the new firmware?

asked 08 Aug 2016 at 05:55 PM

ilkin engin (6)
13

votes

2

answers

1.8k

views

I'm experiencing unwanted noise when connecting my Code25 via USB to my iMac.  I've tried several different USB cables and I'm using GarageBand, making sure to turn off all plugins and no other applications are running. I've seen mention of the same issue on other forums. I've created an audio file with a sample of the unwanted noise. https://soundcloud.com/victor-futura/marshall-code25-usb-noise

Is this a known issue, if so, can it be corrected in a future firmware update?

asked 12 Jun 2016 at 02:06 PM

Chris Conte (13)
Showing results 21 to 37 of 37
Loading - please wait...