Can any of you (sick units) make a few 80s specific guitarist Presets like...
Snake from Skid Row
Lead guitarist from Firehouse Bill Leverty prefferably All She Wrote
White Lion Vito Bratta
Any others would be great also.
and thank you all! Youz guys kill it with these settings!!
I bought a ditto + looper pedal but as soon as it is on there is a huge hissing and whirring sound through my code 25 . Is there any way to stop this annoying noise, because if i cant use a looper pedal i might sell the amp and get one that works with a looper.
IS THERE A RECOMMENDED TIME/PERIOD BEFORE I SWITCH MY MARSHALL DSL20CR TO HIGH/LOW OUTPUT AFTER TURNING ON? LIKE HOW MANY SECONDS OR MINUTES OF WARM UP ON STANDBY?
Hello All,
I´m beginner in guitar playing, can somewho help me find aro create The Darkness preset for my Code 25?
how to use the guitar tuner on my code 50
Hello, I need help, I have the CODE50 for 2 weeks, everything
was fine but one day I turned it on and the screen only lit up
orange with very little intensity, I've been like
this for 5 days, does anyone know how to fix it?
Bought a new DSL40CR in December of 2020 and last month it blew the 630 MA fuse on the PCB. Replaced fuse and swapped out all tubes. Now amp only works on 40 watt but has a lot less volume and does not sound like it did. The PCB has spots around CAPS that look burnt. Any suggestions? Can you purchase the PCB?
Dealer where I purchased not very helpful when I went to them to question about warranty, they kept trying to sell me a new amp, not Marshall and said I would have to pay any and all costs if it was repairable.
Really liked the amp when working correctly but am concerned that this would happen again if I purchase another one. 1 year and 3 months and total failure????
Marshall has restored my confidence in their product. They contacted me same day and gave me a list of where to take my amp for warranty repairs. The amp has 3 year parts/5 year labor warranty. Will update again when repairs are complete.
6/2/2022
I purchased a second DSL40cr amp and got my originalback from the shop. Took my repaired amp home before Memorial Day Holiday and so far it is doing great.
Again want to thank the people at Marshall for making this happen once I explained the problem.
speaker was damaged by the rain
I really like the sound of reverse reverb. Only problem is that the code amps do not offer such effect. I was wondering if anyone knows a solution or if this effect might be something that could be added with an update?
Kind regards,
Joris
Hi all,
finally tried out how much an open back of my Code 100C would affect the sound of the amp. Surprise: The change is very subtle imo. The combo comes a little bit more "alive", a little bit more "airy", but the change was not so significant as I expected.
To avoid an irreversible modification I first just removed the whole backplate. Then - while I was playing - my son put the plate in and removed it again severeal times. "Open" the amp sounded as good as ever, (I didn't notice a change of sound) but when my son closed the back the sound became slightly "muddier".
Now I'm discussing with myself whether it's worth the effort to modify the backplate or not. If I do so I would only saw out either a rectangle 40 to 20 (or 30) cm or - alternatively - 5 or 6 holes with a diameter of about 10 cm.
I know there was a related thread here, but maybe some of you have made some further experience with this.
Greets!
Need a replacement mid range pot for my mg15r
What value is this?
I have a two part question 🤔. I have my two amplifiers listed above. I have both electric and electric acoustic guitars. I'm learning how to play and bought the 50 watt acoustic Amp as I really like the sound of over wound humbuckers through it for heavy slow blues.
First question, keeping the AS50D as the main sound, can I connect it through/to the 100 watt Marshall? Both are 4 ohms and I would like the maximum amount of power to drive my 4 x 12" cabinet of 8 ohm Jensen Tornadoes that are wired in series for the 4 ohm 100 watt MG HDFX. Then I would have 150 watts total to drive my 400 watt total limit.
Question two, can I connect my 50 watt AS50D Amp to my 4 x 12" speaker cabinet by running a cable from the back of my Amp to the cabinet. I have footswitch, line out and (effects loops) send and return Jack's to use.
Even though my 4 x 12" cabinet would be very under powered. I would like to hear the sound of the AS50D through those speakers. I'm new to guitar and don't want to ruin any of my equipment. I did also have a guitar made through two luthiers, I also made the 4 x 12" cabinet to match my guitar. I call them Snort and the box.
I have the components for the sound I'm looking for, now I need to combine them all together. I truly appreciate guidance from the technical support team at Marshall.
God bless you for your time and kindness. Thank you, Eric Dailey
Hi,
are Bluesbreaker II pedals still built? Tried to find a new one, but saw only used ones on ebay.
Konrad
Hi, I have a Marshall Origin 50C, and it started to degrade in sound. I checked the circuit and descovered that the, C31, eletrolitic capacitor is leaking, and the acid have deleted the info of the capacitor values.
Can anyone please help me with this information?
Thank you.
Got the code 50, won't connect with the app. It connects to play music (not really recommended). I figured since the app hasn't been updated for over two years, I just assume the app support is closed. Too bad.
can anyone out there help
I've had the Marshall Code 100 for about 4 years, never done a firmware update and am having trouble connecting the head to my pc. I'm trying through Chrome and Edge, I've downloaded the Marshall utility, started with FX/MOD/REV....nothing...no connection.
Is the ONLY way to get a firmware update through the USB/tiny old outdated plug? I'm guessing with all the technology involved with this amp, there should be another way no?
When I change the preset, the volume increases very much each time, only when I move the knob, the volume on the amplifier returns to the previously set level. The problem also occurs during changes to the foodswitch....
How do I use the Marshall Code 50 Amp in ProTools with the USB Port?
I have a new baby, so I was wondering if there is a way to stream music from my phone to play along with through my wireless bluetooth headphones but also so that the guitar noise comes through the headphones. I image? it I had wired headphones that would work but I don’t want to buy new headphones with a super long cord just for this reason lol
Hi folks,
Reently got myself a CODE25, however I couldn't manage to get it connected to my phone. I assume its due to faulty bluetooth module, because when I turned on the amp, bluetooth version field is missing on the screen. The amp also did not show up on my phone although bluetooth pairing mode was activated.
I did follow the troubleshooter but it didn't help.
Updated to the latest firmware (1.46)
Anyone experiencing the same? Any suggestion how to fix this?
