The headphone output on my Code 100 head is extremely quiet, requiring me to crank the volume on the amp to hear the signal at all in the phones. The phones are new and work fine in every other application I've used. Could I be missing something?

After a 30 year break, I am back to playing. I own a Code 50 and 4-button Marshall pedal. How difficult is it for me to program a number of presets provided in the amp to my pedal? The A bank came loaded so I will leave that alone. I found 3 presets I want to start with and activate them in bank B. I am pretty sure this sounds like a simple question but you are answering a guy that has his kids help with his phone when there are problems. Rock on!

hi everyone, i have a CODE 50 and the biggest complaint i have is finding a preset that allows the amp to be "sensitive" to the controls on my guitars.

you know with any halfway decent tube amp you can ride the volume knob on the guitar to not only turn down (attenuate) the volume but actually change the tone. i know most people use what i call "help me box's" to do this, however, i never use those things. my question is, does anyone know a preset that i can program that will achieve this?

the basic sound would be any Fender or Marshall.

i look forward to anything you all have to say,

thanks,JP

Hi Marshall,

The last firmware update broke the bluetooth autoconnection issue and it has been more than a year and a half and you never updated it. Last firmware update was at Oct 2017, so I made a decision, I posted my Marshall Code 25 on Marketplace so I hope I can get rid of it and get an amp that works properly or at least works as advertised.

I hope you fix the bluetooth issue before you loose more customers. I think I will never buy a Marshall product again.

I have turn on the switch but no effect, it remains off. Someone have an idea for resolve this problem?

ps: I have search on the internet it's may be the fuse but Im not sure. 

Hi!

I have a Marshall CODE 100 (not 100H) and I noticed that there is a "Loudspeaker 8OHM" (input or output ???) on the back side.

I would like to know whether the "Loudspeaker 8OHM" is a kind of input so I can use the CODE only as a cabinet using other device like heads, power amps and etc. connected there, while I don't use the main input for the guitar ? Or the "Loudspeaker 8OHM" is an output to use with others cabinets in parallel?

Thanks

André

I really like it when I get it working. I had to utilize an old Android Sony Xperia phone to get Gateway to connect to my amp.

I found problems wtih the Sammsung J7, S7 and S9 phones that I prefer to use.

As I have a solution, I am not livid, but I do think your support is dodging the issues with Gateway. Hire someone from the SF Bay Area to remake the Application. I am sure you can find a slew of capable programmers. Just contract someone and fire your inhouse programmer(s) as they have let you, no they let your Users down.

Bonjour,

I have updated the firmware of my CODE100H, but it remains on "Ready for update"
The computer displays the display "Restarting CODE please wait"
I restarted the update but the problem remains.


In advence, thank you for your help.
Walter

I too am bugged by the constant high frequency whine coming from my Code 50's power section. It has nothing to do with the preamp or patch, but rather the level of the power amp output. It is rather high frequency and constant, and varies a bit when you move your head. But the problem does exist, and it sounds like some high frequencies are not being fitered well by the Code 50 & 100 power supplies or output section. A number of users have now complained about this problem. I have a solid background in electronics and am not a flake! I'm an LA studio musician and this noise is not good for professional recording. I'm hoping it is something that is easily fixable, because I love the sounds I'm getting from this amp.

Just bought new Code 100H head. It has an 8ohm output. Can I plug this into the 4 ohm jack in Mono of Cab? Or do I have to use the 16ohm jack in Mono?

I have my buddies Code 50 here and was checking out some really cool patches a couple hours ago. Waiting for him to come over to grab a bunch and the page will not load. It was a pretty cool page to check the sounds and navagate. Anyone know if this happens, or am i just unlucky.

Still waiting for my answer about which casters or wheels, I can't believe you didn't know that the 2x12 extension cabinet that is made for your CODE 100H that I bought from you, comes with heavy black plastic fittings with threads, four on the bottom. I would think that they are pretty common..........I appreciate your time, honestly.......thanks...D.Wells

Hi I have just bought myself a guitar and the Marshall code 50 amp however as a beginner I am very confused about all the different names and what type of amps they actually represent is there anyway to find this out and to make it more understandable for a beginner

Comprei um Code 50, toquei poucas vezes com ele e sempre com o volume baixo. Ontem fui ensaiar com banda e aumentei o volume, várias vezes o amplificador ficou mudo e o visor continuou ligado, quando eu desligava o amplificador e ligava novamente o som voltava. Hoje cheguei em casa e toquei com o volume de ensaio, novamente o amplificador fez a mesma coisa. 

If I purcase the marshall code footswitch and plug it into the f/c input on my code 50 do I connect  the looper and the drum  machine into  plugged into the input on the left.  Would this stop the drums from getting the effects on the effects on the guitar

Can anyone tell me which casters to get for my 2x12 extension cabinet I use with my code 100 H, thanks.

I'm using USB on my Mac and the Mac sees the Code and allows me to set the speaker to it.
When I pull up a Youtube video and start it the video will play for about 5 seconds and then halts.
It's almost like something else is intercepting it. It basically locks up and I have to close the browser.

Same issue when using the Code 25 as input device on Mac for Garage Band. It recognizes it but when I record
upon playback the sounds are scratchy and unusable

This Code 25 works on my Windows Machine both ways as Input and Output device flawlessly

I have installed the latest firmware so that is not the issue.

Any ideas on what it might be causing the problem on the Mac?

--Pat Brown

bonjour, j' ai une tete marshall code 100 et je voudrais m enregistrer maisje suis nul en informatique. j' ai relié ma tete marshall à mon pc en USB, mais ensuite, que faire ?  Je dois télécharger un logiciel DAW ? ( gratuit si possible ), et après, quelles manoeuvres à faire ?

Si quelqu un peut m aider ce serai génial, des explications simples et très précises svp...Merci d' avance.

Hello,

I just completed a tour and on the last night, mid-set, my Code 50 suddenly turned off and wouldn't turn on again.

Got it home and I still won't turn on. No lights, no nothing.

Anyone else had this problem?

It was totally fine and really sounded great for the whole UK tour and then  the whole Europe tour, apart from the last show.

Any thoughts much appreciated.

Cheers,

Toby (Art Brut)

Hello, I've had my code 50 for about a year and a half. A few months ago I noticed my amp would stop projecting any noise a few seconds after i would turn on the amp, i found it weird because when i play with my headphones plugged in it works fine but when the signal passes through the speaker it stops making any noise, just completely shuts off. 

It isnt the cables or the guitar as I've tried multiple on the same amp, so I imagine it is a problem with the speaker, anything I can do?