My USB suddenly won't connect and after a number of failed attempts to reconnect with software solutions, I suspect the USB port on my CODE 100 Combo is to fault. Are there connection options available via the headphone jack? Are there fix or replace options for the USB port?
ANY fixes yet this is crazy with a new amp!
Hey There,
How do I set my Code 100 up to record on windows and what is a user friendly software to use.
Thanks a mil!
When are we to get a software update to enable our devices to remember that they are paired to our amps?
Why don't the Code combos have speaker out jacks?
This is incredibly frustrating and made more so due to the nearly year long wait for the Code head to be available in the US. I am very interested to hear the modeling through 1960 cabs, and it simply doesn't make sense to have a completely closed system on the combo amps.
Hello, just wondering if anyone has experience using a Marshall Code amp and then also using the Marshall 4-way switch combined with a looper pedal. If you set up your chain properly(guitar>4-way>looper>amp), can you have each loop have a different effect if you are using this 4-way pedal to change those effects on each loop?
I am experiencing terrible interference when trying to use my Code 50 via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X. I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches. The clicks/pops/noise/interference is loud enough to interfere with the recording process. Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues? I am running the most current Firmware. Any current solution to my noise issues?
Thank you.
Hello everyone,...,,
I was wondering if you could help me with a problem that I am having between my Code 25 amplifier and the Gateway app. I am able to pair my android device and the amp via Bluetooth just fine but once I am in the Gateway app it doesn't detect my amp at all, even when I press "scan for amp" it just says no amp detected.
I think I should add that I have been able to connect it to my apple device without any problem at all.
It would be highly appreciated if you got back to me.
Thank you......
I have a CODE 50 which I L-O-V-E except for one thing. Effects are not as easy to utilize as stomp boxes. I have seen on YouTube how Code owners ckearva pre set “turn everything off” then utilize a whole friggin pedal board. I have tried this and it does not work. Actually more appropriately I’m certain I did not do it right or it would have worked fine. Can someone PLEASE list a step by step on how to clear an existing preset to where it is just a “plain” ol’ regular amp. THA K YOU IN ADVANCE. I’m beginning to feel as if this purchase was purely a novice mistake but I would love to keep this Code but have the option to utilize my modest pedal board if I do choose to do so. THANK YOU!!!
Today I connected my Code 25 to my MacBook Pro to record in Logic Pro X but when I connected it, it went into TEST MODE (which I've never seen before) and I could not record any output from the amp. I unplugged, and restarted both the computer and the amp - same thing happened.
I had my phone hooked up by Bluetooth to control the settings, but I've done this many times in the past and never had this problem. Ideas? Solutions?
i purshesed marshall code 25 about 8month back, now when i turned on all binking lights are blink and than off... after on no lights are blinked in any presets... reset amp, update firmware... not done anything!! atteched some of pictures!!
I was dicking about with tones, as you do, and when I meant to save my custom tone to my footswitch, and accidentally saved DSL Clean Chorus to #11 on the amp, Some Dely For You Too. This preset just happened to be one of my favorites. Is there anything I can do about it?
I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1. I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1. The connection didn't always work and sometimes dropped out. I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all. I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth. As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth. I've also tried searching for it with an Ipad but this also couldn't see the Amp ? It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang. It's a good amp but seems to have to many glitches at the moment looking at the forums. I'll give it one more go though if anyone has any suggestions to try. Any ideas anyone ? Many thanks for reading.
Thanks for the responses. I think it is a hardware issue though with the bluetooth just not working on the Amp. It doesn't seem to matter what device I use the amplifier just isn't visible to anything ?
Hi
does anyone has the settings for greta van fleet?
Code 25
As pointed out in these blogs the Code series locks up during editing and doesn't have an app for Mac users. These issues go back to al least June of this year. When is Marshall going address these issuse other than saying "a solution is coming soon?" I recently purchased a Code 50 but I am not going to hold on to it if Marshall is not going to support it.
I just purchased and plugged in my hundred-watt code amp head prepared to plug it into my full stack two 2 cabinets and it only has one speaker output Jack on the back I am confused befuddled perplexed and never heard of such a thing as specially for Marshall what do I do to run it to both cabinets can I use a splitter box I'm feeling like a snowflake somebody help? Lol
Hi there
I recently bought a code 25 and am inlove with the amp. One problem your app does not work on IOS. I have not tested it on android devices as I don't own any Android devices.
The app opens and everything but the sign in procedure does not work
Please fix your app!!
bonjour je me présente christopher , je viens d'acheter un marshall code 50 et je voudrais savoir si quelqu'un peux m'aider car je veux enregistrer le son de mon ampli pour pouvoir mettre mes enregistrements sur une clé usb par la suite et écouter si quelqu'un peux m'aider ce serais cool merci(christopher)
Dear Marshall team,
I got my new Marshall code 25 but had to recognize that i am not able to connect with the gateway app. I am connected with the amp, but i do not see the connection sign on the left on the app. It is also not requested to enter a code or number while connecting with the amp. The key is also always different when i am trying to connect again with the bluetooth. I am kind of desperately because I was really excited about my new amp :(
What can I do to connect with the app? I tried everything that was already suggested in the other comments. Please help me :/
Greetings from Germany,
Lilli
How far can you turn this up wihtout blowing it up!? Code 50
Ive got a main Heavy Metal Tone I use all the time. The volume in the preset is set to 1.8. I have it that low so it doesnt blow my Clean sound away when I click between the two.
I was playing with a drummer the other day and I had the master volume up to maybe close to half and I was worried I was going to blow the speaker.
So How far up is safe?
