Dear Sirs,

I believe it's time to give answers for who brought a amp from Marshall Code series. There's several issues to connect it with the app Gateway. What shall we do? Deliver the amps because we were never informed that there are problem connecting via bluetooth? maybe that's the solution because i can read issues about this since the very beggining... 

Hola. Puedo enlazar mi celular xiaomi redmi note 4 con el amplificador code50 y reproducir música desde mi celular. Pero no puedo enlazarlo desde la aplicación porque no me muestra ninguna opción del amplificador cuando voy al menú de la aplicación. 

Ya borre el caché y también la instalación nuevamente a la aplicación pero tengo el mismo problema. 

I recently got a Marshall  CODE 100 and I also recently got a Scarlett 2i2 recording interface. Before my CODE 100, I have been recording my guitar by going straight into the interface and using Pro Tools First. That worked fine. I even have been able to use pedals with my guitar and put that right into the interface. However, I want to be able to tweak my tone via the CODE 100 and still use my Scarlett and Pro Tools First. How do I do this? I do not see a line out on the CODE 100 head (I have a head and a Marshall 2x12 cab).

I am scared to really try because I am seeing mixed comments online. Some are saying it's very dangerous to go straight from the head to the computer via USB WITHOUT having it plugged into the cab because it could blow up the head? Some are telling me the only way to do it is it order a 1/8" to 1/4" cable and monoline it out and straight into the Scarlett interface from the headphone jack?

I cannot find a clear answer to these questions. Please, someone, help me. 

Hello,

Can you run a JVM Combo amp in to a reactive load box and then in to a Audio Interface connteted to a DAW? Would you be in standby when doing so or standby off?

Dear marshall.

After software update i have a klik in master volume. When sound is louder the klik also .can you help  .can i put back the software update . Do hou have any idee . Ron graber 

I have followed all of your steps and while my Code 100 pairs to my device, when I open the Marshall Gateway it never shows the code connected, nor does it give me the option inside the app to connect. I have uninstalled and unpaired multiple times with the same result.

Manual says "Connect a single speaker cabinet here for the DSL1HR head". Is it means I can't use cabinet with two 8ohm speakers in series?

Hello :

It is time to have a firmware update. We have been waiting since july 2019.

Best regards

I bought a JVM410H as a package deal with a 1936 (2x12). I was thinking of buying either a 1960a or another 1936.

Can both a 1936 cab and a 1960a cab be connected to the JVM410H at the same time?

Would i be better off just buying another 1936?

Hello,

I'm trying to register the extended warranty of a newly purchased Marshall Code 25, but I'm confused about the serial number field on the registration card. This field accepts a 12-digit serial number, however the serial number listed on my amp is only 10 digits long. Should I simply put the 10-digit number in the field and leave the additional 2 spaces blank, or am I missing something here? 

Thanks!

Where am I supposed to go to register a new head purchased in the USA. THe warranty card came back undeliverable and the web address on the card is dead?

USA is apparently a different process. Any Ideas?

Thank you 

my code 50 it freezes, sometimes it doesnt sound and sometimes it sounds but it doesnt respond..  its new

Hello i'm Daniele and i have a question regard the DI connection of my new Marshall 1959 sv20h:

If i connect the head trough DI out, I must connect also a speaker?

Thank you in advance

Best regards

Daniele

Marshall Code 25 Bluetooth not working !!!!

i try to update firmware to 1.44, i try with diferente phones, android/ios/tablet etc.... wont detect nothing.... bluetooth Marshall not appear!... 

Marshall apps is a fucking crazy bad... and support too.....

Need help please. I love my marshall code 25, but without bluetooth i send it back....

Hi, just tried out my new SV20H head for the first time, running it through my fender 4 x 12 cab (8 ohms). Sounds awesome but I noticed a slight hum when the effects loop is activated. I was running a solid gold FX surf rider through the loop but it did the same with a Boss Space Echo as well. I also took the pedals out of the equation and just connected both send and return with a single jack cable and it still happened. It isn't a loud hum at all but I'm just checking if this is normal? My Origin 50 head that I have been using for the past year didn't make any hum at all with the same pedals!

Hi! As the tile says, does Marshall have any plans to make the CODE EDITOR for Mac as well?

Hi folks!

My brand new DSL20HR has a great sound with my MX212AR cabinet, but when I want to plug it on my mixtable with the emulated output the sound is very bad.

I've tried it on the STB position with my speaker plugged. The sound is bad even with the headphone : a lot of hum and the volume should be at the max.

There was a lot of highlights on these feature :

"Marshall has teamed up with software mavens Softube to create exceptional tones "

I don't understand it can work so bad. I really can't use it and I many other users that seem to have the same problem.

Thanks for your help.

Best regards.

Pierre

Hi, can anyone explains to me WHY we can't use a CODE 100H without the cabinet? For VALVE amps there is a good reason for which you need the cabinet always connected but for solid state amps it seems very strange.

Is it maybe an error in the manual? Maybe it's a phrase that has been written for all the Marshall valve heads and it was mistakenly added to the CODE as well?

Please let me know, I have an application where I only need the 100H coming up soon.

Thanks!