Guys, I've been doing some research on which one is the better choice between non-portable speakers between Marshall Acton II vs Marshall Stanmore II vs Marshall Woburn II. Yeah, I know all the pros and cons, but I need an advice from the one who has some experience with these. I need some juicy audio guys and budget is a thing, unfortunately. I'm willing to throw whatever it takes to have excellent quality sounds, but if it's not a huge difference between audios (except loudness), I prefer to spend less.
I have a code 50 and am trying to update firmware. I have an iPhone X with the Chrome app installed (newest version). I am logged into my Marshall and the gateway app. The gateway app shows I am connected via Bluetooth, but on the my Marshall firmware download page it says I am not connected and my browser doesn’t support download.
It’s very frustrating, Marshall or any support appreciated.
Hi.
I have my Code 25 at home mostly for training and fun, and I think it could be useful in a studio as well. Does anyone tried it on stage and what is your experience?
Hi there! In my marshall CODE 50 there is a problem with the master control, it is like dirty and causes interference and noises, I can´t set volume level like before. Should I clean it in a special way? Should I take it with an expert?
Thanks!!!
how to use play back
I really want a Marshall amp; not because of the name on the front, but I know all of my favourite music was recorded with one. My favourite album of all, for example, was recorded with an old JCM2000 DSL100 (which is obviously not for sale anymore).
This led me to find the new DSL range, but I've heard bad things; particularly about the DSL40C which has lots of reports of fizziness. It also sounded pretty unpleasant to me on YouTube reviews. exchange rates online
I'm told JCM800 is a quintessential of sorts, and I know many music I like which was recorded with one, but I don't want to spend that much money, and apparently it's very loud.
I've heard terrible things about SLX, and the I don't know if the MA/MGX ranges will achieve what I'm looking for.
So I just don't know what to get dude. My main sound is a high gain rocky sound which is really smooth rather than dirty and sounds really emotive... like from the song "The Kill" by Thirty Seconds to Mars.
My budget is about £600.
How the power reduction works on Origin 50h? Is it attenuator?
The www.marshallusa.com/warranty link is messed up and produces a 404 error code. What's up with that? I'd really like to register my new amp.
Hi. Is there anyway of Marshall making a low watt emulated preamp such as the dsl 1 for the code. I was wondering if this would make my code 25 a more useable bedroom amp as at the moment even adjusting levels in app its hard to achieve usable evening sound levels.
Cheers
Hi Marshall team! I recently got my awesome Marshall Code 50, and it has great tones and great sounds! However, would you recommend recording (for a serious album) with a microphone, say of course Shure SM 57 or will it sound better by plugging in the amp via USB to my computer? Thanks!
I have a code 25, but it does not have the threshold setting. Will there be much negative effect?
Can not find
Marshallusa.com/warranty does not work
I have tried to get to the USA link for registration but keep getting a 404 error. The URL I have been using is from the warranty registration card provided with my amp and is:
www.marshallusa.com/warranty
This seems to be an ongoing problem based on the traffic on the forum, is there a work around or resolution in the works?
Hello,
I have a Marshall Code50 amp and I purchased the optional footswitch with it. Lately it is doing some pretty crazy things. I could be in bank B1, but when I tap B2, B1 will start flashing in the window and then start scrolling up the alphabet by itself (C1, D1, E1, etc.). Sometimes I do a light tap to change banks but it goes into switch mode instead. Other times it seems to be working normally, but when I look back down the bank will be flashing. Selecting another bank (or exit) doesn’t have any affect and the only way to reset is to unplug the footswitch and plug it back in.
This has started happening on a daily basis. What’s going on?
Thanks,
Hello,
I have a Marshall Code50 amp and I purchased the optional footswitch with it. Lately it is doing some pretty crazy things. I could be in bank B1, but when I tap B2, B1 will start flashing in the window and then start scrolling up the alphabet by itself (C1, D1, E1, etc.). Sometimes I do a light tap to change banks but it goes into switch mode instead. Other times it seems to be working normally, but when I look back down the bank will be flashing. Selecting another bank (or exit) doesn’t have any affect and the only way to reset is to unplug the footswitch and plug it back in.
This has started happening on a daily basis. What’s going on?
Thanks,
Hi guys,
Thought I'd share what finally worked for me to get my CODE amp to connect to the gateway app.
I had tried literally everything, unpaired the amp, reinstalled gateway about 10,000 times, used 3 different devices. All with no success.
Until I tried this:
This worked for a Samsung Galaxy S2 tablet, but I suspect it would probably work with any device.
1. Uninstall gateway from your device
2. Unpair every single device you have paired with your device through your bluetooth settings.
3. Clear your bluetooth cache and data. On an Android device this is located in App Manager/System apps (to show system apps you might have to click the 3-dot symbol on top right of settings screen)/Bluetooth/Clear cache and data
4. Restart your device
5. Re-Install Gateway app
6. Pair AMP with device via bluetooth
7. Open Gateway app, and hopefully, you'll see your CODE amp has finally connected.
The key here is to unpair all bluetooth devices and clear bluetooth cache through your phone's settings.
Credit to Cris Lebrun who shared this solution elsewhere in the forum. It was kinda hidden so I thought i'd make a separate thread for it.
Good luck
Hi all
I bought a Code 25 and looking into possible solutions for a footswitch.
I only really need to change between two channels (or presets in case of a modelling amp). Basic functionality.
Has anyone used any other footswitches with a CODE, Marshall or other brands?
thanks!
When using the Code 100H, can a Muff type pedal be used in front of the head with something other than Natural selected? In other words if I have JCM selected, pre-fx off, would the pedal work as good, or should I always use the Natural selection with pedals? Thank you.
Hi!
I bought Marshall MID on Amazon. How can i check i bought the original or fake?
Thanks.
the Classic gain channel works fine but when I switch over to the ultra gain channel the volume control does nothing. Instead the Classic volume controls the ultra channel. Switching problems. Any advice