How do I access the noise gate for a Code 50 amp? I'm trying to use a wah wah pedal with the amp and getting a tremendous amount of noise thru the amp. Thank you
Hi
Would I be able to run 2xJVM 215C amps in stereo in 5 cable method ? I'm a little confused about the 2 x master volumes, I imagine that if I use one for my master volume (Master 1) I would adjust that to the same level on both amps and if I use the second master volume for solo level (Master 2) I would need to adjust that as well on the second (slave amp) as well as the master amp (the one with the preamp I'm using).
To access the solo boost on both amps I would send a midi PC command to both amps which would enable the Master 2 on each amp which would then be at the same level?
Would that be right please ?
Thanks
Paul
was wondering if the 2 way footswitch can control the inbuilt pedals in the amp instead of making a whole new preset but with the pedals turned on?
also if the 2 way cant can the bigger footswitch?
Wondering how to turn off whatever it is in the amp that is receiving an AM radio station.
TIA
Jack
Hi,
I have a JCM 800 100 Watt Lead Series, Serial Number is S/A 17873R.
S/A was not use for 50 Watt ?
Thanks
Emanuele
How do I get code 50 to work with Pro Tools? I hooked up the usb cable to my computer, but nothing happens, nothing opens. Do I use a different Asio driver than the one I use with my MOTU interface? If so will they be compatable with-in the same session? The whole reason I bought the Code 50 is because it advertised as being able to connect as a Interface for recording! So far it's been a nightmare!
Rodney K.
Has anyone uploaded any Geordie Walker / Killing Joke tones ?
How do I remove presets from MG15FX
How do I delete a single preset from my library that I don't want
Asked by xavi Fernández Gaya - 08 Mar 2024 at 09:08 AM.....
1. Does this problem occur for all presets? Yes
2. "My potentiometers are almost at "10" - what ptentiometers do you mean? I mean the The volume control buttons for the master volume and volume
3. Do you use any of PRE FX effects like compressor or distortion? If so - what are volume settings of these effects?Yes, I do use pre-fx like compressor or distortions, but they come in programmed presets. How does the volume of these pre-fx settings influence it?
4. What happens when you connect you guitar with your cable to your bandmate's amp?It sounds much louder and more powerful than mine. Is the amplifier a Fender 40W tube amp
When you connect 16 ohms cabinet to 8 ohms 100W amplifier total power is reduced to 50W, but still it should be more than enough. I've got CODE 25 and it's loud as hell.
Is your Code 25 amplifier a combo or is it attached to a cabinet?"
The Celestions in my cabinet are the G12-412ACF 12". There are 4 of them. Do you know how many decibels and power each Celestion cone provides? Another question would be, could it be that the Code 100H amp needs a higher power cabinet (for example, 200w)? Do you know if the Code 100H series requires special cabinets to deliver all the power and force of its 100 watts?
I know these amplifiers are very powerful and good, and Marshall never disappoints me, but now I'm worried because I see that in my rehearsals I can hardly hear anything from my amplifier. I think there's something not right in this whole issue. I would like, since I trust you, some solution or something with preamp, pre-fx, or volumes that I'm not handling correctly in the presets
Where could I buy cabinet CODE412?... I need some information about it. Price, technical data,.... Maybe that's the problem because my amp sounds too lower with a classic cabinet as :
Hi!
Is it possible to record silent - without sound from the speaker - with a DSL-1 COMBO (DSL-1cr) using the emulated out?
Regards
Freddie
What can I do? The firmware update stopped at 97% and the Marshall Code no longer works! Unfortunately there is no correct help on the community! I've tried all of Marshall's suggestions, but Marshall Code still doesn't work! Marshall Code and Mac is not compatible. Can anyone really help? Marshall's software engineers definitely can't do it. I call that; big shit!
how do i identify which size my earphones are?
Hey guys, about six months ago I bought a Mini Silver Jubilee 2525H with a 2536A cab, and after months of testing I've noticed a problem with the FX loop, some videos online says it's a design flaw, I'm not sure. I'm using a reverb(TC Electronic Hall of fame), Delay(BOSS DD-3) and MXR Analog Chorus on the FX loop, and there's a huge difference of volume, punch and tone when I use them in the FX against using it in front of the amp. When the FX loop is engaged(cables in the send>return) it's clear a big loss of quality. Can anyone please help me? I'm not sure what to do. Thanks!
I have a technical query that I'm sure professionals like yourselves can help me with.
I bought a Marshall Code 100 H amplifier and a Marshall Cabinet model Cabinet Marshall Marshall MX412BR from you.
The first observation is that when we're rehearsing, with my 100W of power, I can hardly hear myself, and it seems like my amplifier can't provide more power. In contrast, my bandmate has a Fender Classic 40W, and it seems excessively louder compared to my 100W. My potentiometers are almost at "10," whereas my bandmate's are at "5."
This is the first difference I can't understand. The next question relates to power and impedance. If my cabinet is 16 ohms and my amp head is 8 ohms, I see that it's half, is this normal, or should the amplifier also be 16 ohms, or should the cabinet be 8 ohms? In the specifications of my amplifier, it says: Output: Speaker output 8 ohms minimum impedance.
I hope you can please help me solve this problem, as a Marshall 100W amplifier Code 100 H sounds very distant and as if it were only 30W of power.
Thank you very much.
Are the effects pedals mutually exclusive? It seems like you can't have distortion and compressor (for example), at the same time. Is this right?
Hi Marshall team,
I got my Marshall Monitor II headphones yesterday, but the Marshall App doesn't seem to find, recognize, or connect to them.
Yes, I can see the message that you know about that issue my question is do you have any terms for when it will be fixed?
Because I tried Equalizer from the app on iOS and it's sorely lacking on Android.
Thank you in advance.
I tried to update software on my Code 25 with Mac. Firmware 1.48 and didn't work. "An error occurred - The update process was not completed. I tried to restart Pc, AMP, nothing. Now I can't use totally the AMP. When I turn on, CHECK USB message on the display. Please help me!!
I tried with Chrome and Opera, nothing change.
I purchased a very nice and great sounding used but newer DSL40CR that came with the compatible 91016 six-button footswitch, but unfortunately it does not work.
The standard footswitch that also came with the amp works fine. And I also checked 3 separate working cables, so it seems to be the footswitch itself. When you plug it in, it sort of uncontrollably cycles through channels and all six blue lights illuminate on the switch, but then nothing. Totally dead.
I really was pumped at being able to set up four pre-sets, clean through lead and a few in between. Now I'm stuck with just the two playing live.
That footswitch seems to be unavailable anywhere. Is anything else that is available compatible?
thanks!
Andrew
Was wondering why the clean channel on my DSL40CR sounds slightly distorted. Not truely clean. Could this be a tube issue? Thanks.
