Hi guys, is it possible to jam with music off my pc using the usb instead of using bluetooth on a phone, i dont want to transfer songs to the phone as it is also used for work, yes the pc has bluetooth so if thats a possibility it would make it easier than the phone.

I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.

- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...

- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...

DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE

When I just play the guitar I get sound from both sides of my headphones. When I use the bluetooth or use the mp3 in jack and play a backing track it cuts out the right side headphone.

When I play with no hedphones it sounds fine thru the speaker.

Is this normal or do I need to change the settings on the output from my phone or something? 

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

No automatic bluetooth connection after firmware update.

Please solve this problem.

Or support firmware rollback!

I have already asked twice about Bluetooth connectivity issues.

https://my.marshall.com/forum/question/1647/how-long-do-i-need-to-wait-for-code25-firmware-with-bluetooth-issue-solved?filterType=recent&myActivity=True

and 

https://my.marshall.com/forum/question/1308/there-is-a-problem-with-the-bluetooth-connection-since-the-firmware-update.?filterType=recent&myActivity=True

I've been asking questions for over 10 months already, and it's been a year since you released the firmware.
I am already anticipating your answers.
Do you plan to update the firmware?

This is really ridiculous. If you do not have any more updates, I hope you will be able to roll back to the previous version of firmware.
Previous versions did not have this problem at all.

Hi, I'd installed the Marshall Gateway app at my iPod Touch 4G 32GB with iOS 6.1.6. and the app everytime closed a few seconds after starting. Whats the matter? ... No problems with bluetooth connection to my Marshall Code 25 for music listening. Please help me! - Thanks.

When I try to save a preset to the amp, there is no problem. When I try to save a preset to my library I get the message: Patch cannot be saved; sync with Marshall server in progress.  My gateway has both a Bluetooth and an internet connection. Logged into my.marshall but nothing happening. Sync button is disabled. I feel like I'm missing something in my understanding of this aspect of the Code/Gateway system. Is there a user manual for the Gateway app?

Hello, 

I recently acquired a Code25 amp along with its footswitch (excellent for practising, great for gigs). 

One interesting feature is the Gateway app, however it doesn't seem to function with Android 9... making it useless. 

My device (latest version of Android 9) successfully finds the amp and pair with it, but the app doesn't display any connected Amp... even if the phone is literally ON the Amp. Nothing seems to correct this: tried resinstalling, repairing, etc. 

Is there anything to do here? Any fix? 

Thanks,

I was truly investigating these Marshall Code amps (the Code 100H really) a few months back until the point that I found your channel. It appeared no one had anything decent to state about the Code arrangement, so I essentially begun looking somewhere else. There was a decent arrangement on a fundamentally new Fender Mustang V v2.0 through a companion of a companion despite everything I didn't know about it until the point that the person consented to go to my band's stick space to give me a chance to take it for a true test drive. Purchased and paid for inside 30 min of playing and I couldn't be more joyful with it in the wake of downloading a portion of your presets. I've since played 3 gigs with it and Fender nailed it on the head. I can perceive any reason why Marshall chose to get into the displaying diversion (it likely has an entirely hot market versus genuine cylinder amps dependent on cost) however I really can't trust how seriously Fender spoiled the Mustang GT arrangement; they should have simply perceived the V2 Mustang arrangement and include bluetooth/USB cell phone bolster, an application to make things less demanding and a more extensive scope of impacts and they would've been cleaning house. At any rate, too bad for the indulgent remark; I needed to thank you for controlling me towards the Mustang. Your demo of the Code arrangement unquestionably sounds superior to anything the others I've heard, however I have no second thoughts as of watching this haha.

It sounds alright (despite the fact that the metal setting was terrible and I like metal!). I do have an inquiry. When you utilize the Bluetooth to change the settings, does it recollect it when you control it down or do you need to change it again every time you turn it on?

Andrew B. Lessard

Hi, I have a problem with my Marshall Major II bluetooth, because all the time while using the microphone from the headphones the sound from that is very unclear. It's not depended on the system, it happens on Mac, Windows, iOS etc.

please find away to do BT firmware update. just hoping.

Hello,

My macbook pro 15” 2017 doesn’t see marshall minor ii bluetooth headphones.

Is it possible to connect it?

Hi, my marshall code 25 has a bluetooth issue. It's failing and cuting the sound when i take the cellphone at 2 meters from it. I've already updated it, but it still happening. What can i do to solve it?

I can pair my code to my phone and connect but the Gateway app won't communicate to the code. What do I try next.

When are we to get a software update to enable our devices to remember that they are paired to our amps?

I have an iPhone with google chrome installed but when I try to get a preset it says midi not available everything else on Bluetooth is working. Are you telling me I have to have a desk top instead of using my iPhone to directly get presets? So confusing!!

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

Hello everyone,...,,

I was wondering if you could help me with a problem that I am having between my Code 25 amplifier and the Gateway app. I am able to pair my android device and the amp via Bluetooth just fine but once I am in the Gateway app it doesn't detect my amp at all, even when I press "scan for amp" it just says no amp detected. 

I think I should add that I have been able to connect it to my apple device without any problem at all.

It would be highly appreciated if you got back to me.

Thank you......