Hello. I've lately been having difficultys with my MG50DFX Marshall amp. The problem is, is that the input jack will refuse to make a connection unless I hold the quarter inch jack up. I don't know much about amps and I'm hoping this is a simple fix. I've already taken the amp's motherboard out from the cabinet and taken the piece of plastic off of the top of the jack. I've attempted to bend the 2 metal pieces that make a connection to the male jack down, but to no avail. It still refuses to make sound without me holding the wire up; otherwise, it'll just make feedback. Any ideas?
Hi all, hope someone can help me with this,
got my code 25 Friday, all set up starting making a few presets of my own all hooked up working fine.
been using it this evening. Working fine turned off to grab some food came back and now it won’t connect to the Bluetooth.
My phone keeps showing an error message saying it can’t connect make sure the amp is on and in range. It is and is respectively.
tried all manner of phone first then amp on and off first.
Went out the car and made sure my phone would connect to that and it did fine.
Anyone with any ideas?
i have an iPhone 7+ running iOS 11 and a code 25
like a said was working absolutely fine all weekend.
thanks
andy
Do the patches download to your iPhone for use in the gateway? Or do you have to have the USB connected and transfer via laptop to the amp?
Anyone WHO has a take on Stevie Ray Vaughan’s Lenny?
Hello,
I bought the Code 25. I managed to pair the bluetooth but on app it does not connect. I can see the AMP in app but it cannot connect.
I Have a Samsung Galaxy S8+.
Already updated the firmware.
Unpaired, paired again and I have always the same problem.
How can i proceed to connect the app to the amp?
Thank you
Hi
I’ve used my Code 50 for the first time since updating my iPhone to iOS 11 today, and the Bluetooth connection is dropping every few seconds. I have to close the app, turn Bluetooth off and on and reopen the app. Then it drops again. I never had this problem before updating my iOS.
Has anyone else seen this?
Hi there !
I've got a problem with my amp. I've bought Marshall Code 50 about 6 months ago and I'm playing in a band. When I set the sound I like, there's no problem. But when I turn up the Master and I play for more than 20 minutes, the sound become very ugly: No dynamics, no bass, too high... It's like playing with a simulated amp on a computer with a very bad sound card... And I don't know why..
Is anyone has the same problem ?
Thanks a lot !
Well for some of you this should "make your day"!!! Couldn't resist posting about this!!! Hope you don't mind my "stealing your thunder" Team Marshall!!!
At least one retailer / supplier in the UK received their shipment of both the CODE100C and CODE100H yesterday!!! Unfortunately they did not receive any seperate PEDL-91010 footswitches though (so my problem is not yet solved but, nevertheless, this is good news is it not???). I see that there is a 4 x 12" CODE cab. available as well (for the CODE100H). Nice.
I have also contacted Amazon (UK) and they are contacting Marshall to see when they will receive the amps. and footswitches (and they promised to get back to me today so I will update once I hear from them).
There is also a retailer / supplier in the US that expects to begin shipping tomorrow (29th) apparently.
Have fun!!!
Unfortunately I'm "up to my ears" in Marshall CODE amps. so I cannot see myself ordering CODE100's anytime soon. But it'd be really great to hear from those of you that do indeed manage to get their hands on them (especially the CODE100H with the 4 x 12" cab.). Let us know what they're like. My bet is that they sound just as good as any 100W valve head / cab. if set up right (I still marvel at the sound of these CODE amps. to be honest i.e. unless you have a REALLY "good ear" or are a "purist" you have to listen pretty darn hard to tell the difference) (if set up correctly of course).
Regards,
Dale.
My DSL40C suddenly began a fading out static when the standby switch is enabled, or disabled. Also the volume knobs don't do anything, anymore. The gain knobs increase the volume, but there is really no gain. These problems began suddenly and together. I have new tubes on order. What is the most likely issue?
Thanks!
Is it possible to mod a Marshall Code 50 amp to add an effects loop that allows for running external effects through the power amp stage and bypassing the preamp stage? That is my main complaint of this amp- no effects loop.
Can anyone please share "We Will Rock You" by Queen preset for Code 50 amp?
Thank you
Hi Support Team!
I am using a
Samsung Galaxy S7 Edge Device
with Android 7.0
and Gateway App v 1.4.2
to a Marshall Code25 with the latest Firmware Version (as of 25 Sep 2017). The Firmware Update Utility says v 1.0.0.15 N in the bottom left corner.
I was able to use Gateway to control the Code25 until a while ago, I am not entirely certain if it was until the latest Android Update, but have a strong feeling it was until then.
Now I am able to pair the devices, connect via Bluetooth, Stream Audio over the Code, also able to FIND the Code in the Gateway App, but unfortunately I am not able to connect in the Gateway App. When I tap the Code in the Connect Menu, it says "Connecting..." but then nothing happens. It just will not connect.
I tried all your troubleshooting from the website, including Firmware Update, re-installing Gateway, unpairing, forgetting device, re-pairing etc.
I always end up in the "Connect..." mode and am not able to control the Code via Gateway.
I was very happy with amp and experience and really liked the remote function via mobile and Gateway app, even more now I am very disappointed that this bug persists already a few weeks with no App update or firmware update seeming to fix this.
Please try to recreate the bug with the described configuration and please find a solution and release a bugfix/new software version.
Many thanks in advance and kind regards
Chris
I have a Code 25 and a windows 10 computer and I have tried everything and I can not get the amp to connect to my computer via USB. Does anyone know why? If anyone knows why please help!!!
need to have search available for patches at https://marshallcode.tools/patch/
how can we get more presets we can use?
one good example of what is very useful is the fender websites: https://fuse.fender.com/mustangv2/presets/
ALOHA FROM HAWAII, DOES ANYONE OUT THERE ENJOY THERE MARSHALL VALVESTATE 150 WATT HEAD WITH 1936 2 X 12 CELESTIONS AND A 4X12 A CABINET 1960 LEAD A CAB SLANT TOP, THIS HAS PROVIDED ME THE MARSHALL ROAR OD1 AND OD 2 ,ACOUSIC SIMULATOR, CLEAN ,AND FULL EFX.$ 575.00 FOR THE HEAD. 2X12 1960 CAB $575.00 AND MY 4X12 A SLANT TOP $575.00 ALL 75 WATT CELESTIONS MATCHED. THAT AND MY GIBSON LES PAUL DC STANDARD PLUS $1,700.00 FULL SET UP NOT TOO BAD FOR PRO GEAR. TOTAL INVESTED $ 3,500.00 TO PLAY KILLER GUITAR. THEN I SPENT $1,000.00 FOR PEDALS , DUNLOP, IBANEZ, BOSS, CRATE, ETC.
Is the MG100HCFX head fitted with a cooling fan?
Hi-
I bought a brand new DSL40C on Reverb.com from an authorized dealer, and I am trying to register the amp for the Warranty. I do not know where to find the serial number on the amp. The number underneath the barcode on the back of the amp does not seem to match up with the blank spaces on the physical warranty card. Where can I find the serial number? I am in the USA.
Thank you.
Has anyone else been having problems finding the amp on bluetooth? Some days my iphone 6 can find it other days it can't. I feel like marshall abandoned the code amps. Does anyone know if they will be releasing a firmware update soon?
While waiting patiently to see if / when the CODE100 amps. are going to be available I happened to look at the supposed specs. for the CODE100 on your (Marshall) website found here: https://marshallamps.com/products/amplifiers/code/code-100h/
I couldn't help but notice that the CODE100 will allow 5 x simultaneous FX to be used. As we are all aware: this is not the case with the CODE50 and CODE25 i.e. only 1 x FX may be used. Aside from the obvious physical difference and output between the CODE100 and the CODE50 and CODE25: everything else appears to be the same other than the number of simultaneous FX that may be used. So my question is: is it not just a simple firmware update / upgrade that will allow for 5 x simultaneous FX to be used with the CODE50 and CODE25??? If so: could we have it please (or could we at least have some input or further information on this)??? In hindsight and as wonderful as I think these amps. are: it's starting to not make sense to me that I still have to purchase stompboxes if I want to use, for example, a compressor, additional distortion, and, say, an octave (pitch shifter) when all of these FX are actually included on the CODE50 and CODE25 but only 1 x FX can be used at any given time.
Regards,
Dale.
