Hi,
I'm excited to buy a new solid state CODE 50 or 100 as my main gig/practice/recording amp. Before I do, can someone please explain if the included Gateway software can actually record new songs onto my windows pc via the USB port, and can it save the song as an mp3 or wav file, which I can later import into my DAW software to edit?
thanks,
Bill
Hi all.
I just bought a used JVM410H, but it didn't come with a footswitch. I do have access to a footswitch from a JVM410HJS (PEDL00055), but for whatever reason it doesn't like the JVM410H...even though AFAIK it should.
Can anybody suggest a solution, please?
Cheers!
I hope someone can please help me here.
I have tried to use various methods in connecting my code 25 via USB to my windows 10 with no luck.
Can someone please tell me how I can do this because I just purchased the amp a week ago for primarly recording and I cannot get it to work.
It played my track out of the code speaker for a moment but thats all. I continue to get errors from windows saying that the USB is not recognized,
I have ASIO drivers installed and use reaper as a recording interface.
Please help! I would be much appreaciative !!!
John
I tried the factory reset. It seems the only thing that did was wipe out my presets. It did absolutely nothing for the noise from the input jack. The noise is like 60 cycle hum on steroids. I've tried four different cables that were dead quiet when plugged into my other amps.
Hi.
I am using a CODE 50 and i am happy.
My experience is very good, of course this is not a HIGH END amp neither the real ones that CODE emulated, but for the price its an amazing amp, and for what i need, playing at HOME at lower volumes with quality and flexibility. Its a very nice solution to have in a very easy and cheap way some historical Marshall amps tones, and again this is not the REAL AMPS of course, but the quality and the price are very very GOOD.
I am using tradicional pedals running in front of the amp, due the absence of effects loops i am even running delay in front. The only effect that i am using from the CODE is the reverb.
Now comes one of the best thinks for me, i am using Marshall Footswitch, and i create 6 banks of presets for my taste :-) please see the photo. With this i can have imediatly diferent amps with the presets that i made, i event put some hang tags identifiyng the names of the presets.
To record i use 2 SM57, and my main guitar is fender 60 anniversary commemorative stratocaster.
I have sereval other amps, all valves, but again to play in home, record, jam, and so on, this setup is one of the best that i done.
Keep rock in a free world !!
Cheers.
Miguel
Hello.
I have 2 x Marshall CODE50's and a Marshall CODE25. I also have 1 x Marshall Footswitch (PEDL-91009). I run the 2 x Marshall CODE50's together (signal from guitar simply being split using a stereo delay pedal). Any ideas how I could control both of the CODE50's with 1 footswitch (just to scroll / change presets up / down on both amps at the same time without having to use two seperate footswitches as this is not practical live)???
Regards,
Dale.
Hi,
I'm not able to make Marshall Gateway app connect to CODE 25. "Playback" functionality works fine (I'm able to play mp3 stored on my phone), but "FX", "AMP" nad" Preset" options are not working . When I go to "Menu" section I receive info that no amp was found even though I connected CODE25 via bluetooth to my Samsung telephone.
I've uploaded new firmware yesterday and problem still remains.
Thank you in advance for your advice.
Piotr
All of a sudden the input jack is making horrible buzzing noises when a cable is plugged in. Is this a hardware issue or would a factory reset fix it?
Hi,
I am happy owner of CODE 25 for almost half of the year.
I love to play with it but I have frustrating problem with connecting Gateway app to it. Bluetooth connection works fine immediately after switching on the amp my iphone is connected, no problem, but then Gateway application connection to CODE drops after while. Then I need to go through connecting all over again, this I switch of Bluetooth on my phone and after swithing it on again and relaunching Gateway I'm connected to CODE. Unfortunately after few minutes the connection breaks again. And at all time my Iphone is connected properly via Bluetooth to the amp! So I'm reconnecting again and again and again...Quite annoying.
Any kind of advice for remediation of such issue is mych appreciated.
Regards,
Krzysztof
ok hit a cord , let it ring and switch presets. hear that tiny drop out? it does that with the footswitch too. i play in a band where i run sound from stage and i turn my solos up by switching to a preset with more gain and volume but how can i do that if it dropps out noticibly for an instant. if you use the same amp in the presets 1jcm, 2jcm more gain and volume, 3jcm you can switch with no drop out but if you change amps 1jcm, 2 silver jubile, 3 jvm it drops out. big glitch marshall. i might expect something like this from behringer but not you . shame shame shame
Having trouble with the high noise floor of the Code series, and fizzy digital artifacts bubbling away in the background ?
Start with any of the 'Clean' preamps, and follow this article to the letter. It helps.
http://guitargearfinder.com/guides/ultimate-guide-to-guitar-amp-settings/
Code 50 will connect MIDI to phone, but amp will not connect. Running Android 6.01 on Samsung S5, Bluetooth LE compatible. Have tried the fixes in Forum, unloaded/loaded Gateway, removed/added device from bluetooth....nothing. Phone will pair with the amp and you can stream music, but Gateway will not connect even after pairing. Do I have a defective amp??? There are several users on the forum with this issue. PLEASE HELP. Like the tones and flexibility, but if bluetooth will not work, I'll send it back and get the tube H&K. Jamie
not a question, but I just got a switched 1/4 female jack and a 1 hole can to put in the back of my code 50 to allow me to connect it to a 4ohm external cabinet - like a Raven RG412. I will post pictures after I do it.
Is this amp worth picking up , I know it's an acoustic amp. What do you guys and gals think
My Marshall is no longer running the boost channel. Everything works perfectly, the clean channel and the overdrive are working perfectly, but when I turn on the boost channel the overdrive does not emit sound, it loses the full volume. I do not know what to do to solve the problem. I'm in Brazil and I do not know if there is technical assistance here.
Rarely use external cabs - but want to use the combo's 16ohm speaker and an 8ohm one from open-back cab just to see how it rolls.
Any ideas?
Thanks.
Good evening I bought a pair of Major II model headphones, no bluetooth, if I connect them to the pc no problem, but just plug them into an mp3 player you hear a low sound, kind of out of phase and to try to improve the situation I have to keep Pressed the remote control key.
Do you think it's normal? Thank you for your response
At this point, should we just hang up the idea of the Code 100 ever being available? I love my Code 50, and would absolutely love to have a 100w version but every time I check stores, its been delayed again. What gives Marshall?
Has the Code 100 head or combo ever shipped to US retailers? For 2 years they keep moving stock dates, but never send an e-mail they have received inventory.