DSL40cr . I'd like to plug in a 2x12, 4 ohm cab into the  4 ohm output and leave the existing 16 ohm internal connected to it's original 16 ohm position. Is this ok?

In other words(back of the amp) the 4 ohm cab would be far left hole, and 16 ohm internal, far right hole, all at the same time. Good to go ?

Thanks, Dan

Hi team. I bought a code 50 a while back and it has been working perfectly fine. Recently however, it would start going quiet while I am playing. This all happened after the new firmware update and the amp is now unusable as it goes silent after as short as just 5 seconds from being turned on. I can get it to work after pressing the bluetooth button and then back, but 5 seconds later then it just goes quiet again. I do now know what to do, seems like a software issue.

Hi,

I've just received my Code 25 amp today. It sounds good but I cannot pair it with my iPhone

It appears as "Headphones" in the bluetooth settings. When tapping on it, my iPhone says "Pairing failed "Headphones" is not supported". 

I've tried with 4 different iPhones (all up-to-date) and got 4 times the same trouble

I've successfully updated the firmware of my amp (MCU 1.47 / BT: V3.2) but it did not fix the issue.

Can someone help ??

Thanks !

Hello!

I just noticed that the Marshall Gateway app is no longer available in my AppStore (Sweden). Is this correct? 

/M

Hello-

Is it possible to backup all my Presets for my Code 50?

If so, how is that proceedure done?

Thanks in advance!

I want to check if my marshall major IV are legit
My serial number is 73400553L23295H0052782

My Major IV is not working in Bluetooth Mode:

• does not opening, 
• does not charging
• only work in wired mode
• Only 7months of usage

Does the Marshall Gateway app work with an Amazon Fire Tablet?

Can't find the app download in the Playstore for that tablet

Thanx in advance

Keith

I'm running the Firmware up date  on my code 100 and it's stuck at the restarting in bootloader mode code please wait (1.5 hours). I tried canceling and now  notice an electronic hum it never had.

Hi guys! I’m new with the CODE 50 and unfortunately I saved one music style over the 38' acoustic preset. Is it possible to recover the original preset? Do you know how I can solve this? Please help me.

Please people, could you help us to developing a new firmware update to fix the DSP AMP simulations for Code 25/ Code 50?

If you could make a fast research on web, you are going to see that this is a very common issue for all Code users. Probably the last firmware updates is affecting just a part of the DSP boards, not all, but in my case and many other people, we can not use the AMP simulations anymore, and the Distortion and Overdrive FX are not ok too.

At least,  could you make the older firmware versions available for tests? I'm sure that most part of the users prefer to have the original and very nice tones than bluetooth running better, better connection with the App, or any other improvement.

Thank you, and please, consider our beg.

Hi, I had a marshall code, dsl 1w, 15w and 40w. I liked of 1w, much loud! I sold all and I have been used a app amplitube with iphone and ipad + irig nano amp, but I figure out in the worst way about update versions, It just stops working after the update. A nice day, and you cant play anymore on analogic gear. 

Now Id like a all in gear and the better for me now its the Code 25.  Even without the app I can handle the amp manually. Although, be convenient. 

Whats the current version suportted for code today? My IPAD 9th  is 16.5, IPHONE 7 is 13.  Is it works? 

thanks. 

I have the possibility of buying an used MARSHALL CODE PEDL-91009 FOOTSWITCH for my MARSAHLL CODE 25, and the seller has told me that it does not come with the connection cable to the amplifier, is that really the case? What kind of cable do I have to use to connect the pedal to the mono or stereo jack amplifier?

This pedal has to be powered by a battery or receives electrical power from the connection cable with the amplifier?

Hey Guys

I'm looking for a good home amp that isn't a tube amp that I have to crank loud for my tone. Looking at either one of the amps from the MG series or a Code 50

I'm a blues, blues rock and classic rock player - Allman Brothers, Ten Years After, Savoy Brown, Doobie Brothers, Dire Straits, etc

New to Marshall amps - sure I've listened to a lot of the greats playing thru them but I'm not all that familiar with the various models.

With the Marshall MG series, I see various designations such has MG50CFX, MG50DFX, MG50GFX and the most recent are referred to as the Gold series

I worked in electronics so I would guess that the various designators are revisions that took place in the amps - does anyone have info on what those differences are? Or time lines, approx dates when the CFX, DFX and GFX amps were brought to the market? Any thoughts if one series are seen as better

Or would an older AVT50 be a better choice?

Any thoughts would be welcome and many thanks in advance

Keith

aka GnLguy

So, I have had this problem on my CODE 50.

I turn it on, plugged my guitar in it, everything normally, but after some seconds or minutes playing, it just get muted on! 

The funny thing is that the Bluetooth keeps working on... I tried to eliminate some bad connection but I never found one. My cable is good, my guitar is good too... I don't know, it maybe could be a board problem or a electrical/power supply fault... 

The Amp and display are up to the date, firmware 1.47.

Please any advice is welcomed 

I'm looking for settings on my Code 50 to get the tone that Mark Knopfler has on. "Our Shanghai-La" (live).

Tom F.

Hi there ,
I recently bought a DSL1CR and see that the one speaker output states 1x16 ohms. 
I am aware it can be run without a speaker for silent listening through the emulated output. 
Can I connect my 8 ohm 1923 external 2 -12 cabinet to the DSL1's 16 ohm speaker output and run it safely? 
Thanks,
Russ

bonjour

je recherche une preconfiguration de Mission Impossible Theme de Lalo Schiffrin

pouvez vous m'aider?

I've been holding off for the next-gen Kilburn for the last 2 years, but I'm obviously getting impatient since the last Kilburn was launched some 5 years ago and there's not even a speck of news out there about the next-gen! :((

Now that Middleton has come out, I'm guessing that it is the replacement for Kilburn.  Shall i go ahead with a Sonos, or is there still any hope for Kilburn III?