is it possible to play code 25 amp naturally without having any presets on? if so please explain?

having never used amp with more than one volume what is purpose of volume dial and master volume,? and what volome should guitar default be when using presets , also is there a setting for playing a bit quieter without losing effect of the presets?

Experienced as trained. Bluetooth seeings screen on the telephone set at 'check for gadgets'. Squeezed both 'fire up' and 'power' catches. Amp shows 'Bluetooth matching empowered' trailed by a 10 digit blending code. Be that as it may, my telephone essentially won't discover the amp. The telephone is a Sony ZX1 with the most recent Oreo programming.

Attempted a similar cycle with my better half's handset which is a Samsung world 5.

No amp is found on that gadget either with a similar cycle.

Not certain what's left to attempt

Any counsel

I left the F/S aside for a few days and today when i decided to use it just stoped responding.
The display shows A1 sometimes it twinkles, sometimes dont. But It doenst responds when i press the buttons.
I press ALL the F/S buttons and nothing happens!!!

I didnt drop it or nothing similar, the F/S is kinda new i bought it in June, the F/S conditions is visually intact.
Am i forgetting something?

Things that i've tried already:
- Factory reset my Code 50
- Factory reset my F/S

My setup:
Foorswitch 91109
Marshall CODE 50

As per title, Code 50 speaker suddently stopped outputting any sort of sound. Swapped out guitar leads and done factory reset to no avail. I can use it through headphones. Help!

Hello!

I've registered today on my.marshall.com and added some presets to "My Library" section. The thing is when I go to "My Gateway" section on this site, so I can add the presets I've just added to the library of presets list that I see on the APP on my phone (Android) so I can play them, I see the following message:

You haven't synced any presets from a Gateway app yet.

Click here to download the Marshall Gateway app now.

I've already downloaded the Gatewayy APP on my phone, and I'm actually logged in my phone too, and by the way I've synced my phone with the "Sync Now" button on "My Marshall" section on the APP many times just in case. On the other hand when I enter "My Gateway" section, the "My Library" list of presets I've just added it's there at the bottom of the page, but I can't move them to the 100 preset list that is already loaded in my phone like I've seen on tutorial videos (the 100 presets aren't there).  Seems my.marshall.com can't recognize the syncing. I've logged in and out of my.marshall.com and on the app, with no effect; it doesn't make a difference if the amp is on or off. Any help would be greatly appreciated, thanks!!

Hello, 

since several weeks, I can't use gateway app for my CODE 25.

It seems to be ok with bluetooth, because if I lauch a video on my iphone, i have sound on the amp, and the blue light is ok. 

but on the gateway app, impossible to connect. thera is not the little display (amp / iphone), 

when i do a scan, then i choose the CODE V020093C8E, but I have this message:

"You may only control amps you are already connected to for audio output"

I tried to do a new configuration of bluetooth, no success,

I tried to delete app from my phone, then download again, no success.

The amp is up to date.

help please.

Thanks.

Laurent

Hello,

Gateway works  without problems on my Code 50 Amp up to yesterday 06th October 2020!

Amp is not often used, bought new on November 2018. Also checked  for the latest update for this Amp on 06th October 2020.

Android Device is Samsung Galaxy S8, version 9, latest update 01st September 2020.

Several times i have again and again downloaded the Gateway App en have several times tried to get bluetooth connection between Amp with device and between device and Amp.  Bluetooth connection between Amp and Device no problem. Is connected for streaming audio to the Amp. But no succesfull to connect App with the Amp. Tried over and over conform all the instructions on the Marshallwebsite /troubleshoooting.

Very, very strange that App is not working anymore!

 Who can give me the solution to solve this very strange problem which give me headaches?

Hi, when I press the REV and POWER buttons simultaneously the blue light doesn't flash like it normally should anymore. Therefore I can't pair new devices to the amp. I used to be able to still connect my phone because it was already paired but when I accidentaly pressed the "forget device" button on my phone I can't connect anymore. What do I do now?

Does anyone use Code amps for gigging? I have a Code 50 that wouldn't work for my main band but I also play in a punk band that plays a lot of smaller venues/DIY's/house gigs etc.., the problem I have when I've tried to use it for these smaller gigs is that when I turn it up loud it gets staticky. Is this just part of the deal with solid state amps? (My normal stage rig is a 100 watt JCM900). Should I have the preset volume down lower and the master volume cranked? Maybe vice-versa? Both loud? Is it the presets I'm using? Any help would be greatly appreciated....

Is there a list of defualt code descriptions? Explaining what each code name is emulating? JTM Chill means nothing to me.

Thanks,

RG

the application does not recognize the code 25 amplifier, it only plays music, but I cannot control the effects.

It is quite easy to reorganise presets using the My Gateway webpage, which then syncs to the app. However, I like to keep my presets on the app and amp the same, and it is quite arduous to transfer them all manually, is there any way to transfer all presets from the app to the amp at once?

Yes, I've read the many questions of the same nature on the forum, and performed all the suggested actions. None of them have been successful.  I've seen many questions similar to mine, and only a few who have been able to make it work... and of those who did, their solutions didn't work for me.

When I connect my amp to my phone's bluetooth, it will pair for audio with no problems.  I can play audio through the amp.  When I open Gateway, there is no "red button" prompting me to connect.  When I tap on the CODE tab in the menu, it says "Not connected" and when I tap on the green "Scan for apps" button, nothing happens.

It will connect to my Samsung tablet with no issues.

Here are the steps I have tried:
Factory reset on the amp.
Unpair  and forget the amp in my phone's bluetooth settings.

Uninstall the app from my phone after clearing the cache and the data.

Update the firmware on the amp (the browser window said I was up to date but I installed the latest firmware anyway.)

What else can I do?  I don't want to return the amp because it sounds great, but not having the amp controls on my phone is a deal breaker.

just received my code 25 today in the mail, sounds great. except when I turn it on or connect to BT. when i do either, it makes a horribly loud screech sound that last about a half second. tried resinstalling fw, disconnecting all cables, still the same. can this be fixed or do i need to return it?

Here's a video of the loveliness: https://youtu.be/MW6hgIA0VCI

Thanks! Chris

Hi Marshall,
I am havin issues connecting my CODE 50 with my iPhone via Marshall Gatway app. Bluetooth connection is working and is connected with iPhone, but when I open app, app finds the CODE 50 amp and then it says "Connecting..." and nothing is going on. If I tap on my amp under Amps Detected, gives me this message: 
"Connection Rejected - You may only control amps you are already connected to for audio output".  Please help.

Having this issue with Code 50 just updated the latest firmware 1.44v

The amp will hangs or store by itself and nothing works after operating for sometime.

Pressing the footswtich or amp buttons nothing works. Have to do a power reset on it.

Any idea what happen to this?

Hello !

I have a Code 50 and I use the Gateway to play, but it does'nt stay connected. For half an hour of playing,  I have to reconnect 4-5 times. Do you know why ?

(The Code is the only Bluetooth connection in my phone).

Thank you !

JFG

Does anyone have a preset that is close to CC Deville of Poison?

Thanks

Hi all. I have a Code 25 which sounds great through headphones using the cab emulation. Without headphones I'm struggling to find a cab that doesn't sound really boxy. If I switch the cab off, it becomes a fuzzy mess and is unusable. Am I missing something or is that just how it is?

Thanks in advance!