Does anyone know if the issue over master volume being too sensitive (too low or too loud due to non-linear response) has been fixed? Looking at getting a Code 50, but this would be a deal-breaker for me. Amp will be mainly used for home practice / recording with occasional gig use, so it must be able to perform at bedroom levels without tone loss. Thanks in advance.

hi there

i have a code 25 which i really like. I dont play a great deal but of late i've noticed some stange behaviour from it;

1/The Lcd display flickers eratically between values and preset names when playing. Sometimes the display just goes blank, but luminated.

2/On occasions the whole sound fluctuates and sometimes even a complete loss of volume after a short while playing. The only way to get it back is to turn the amp on and off repeatedly.

3/Red edit light is almost always on and flickering .

I have tried to reset it but doesnt seem to allow me to do that -  the screen goes blank.

Its still under warranty  (just) but the shop i bought it from (Rockbotton Croydon) is closed due to the Covid.

Any ideas please

Hello everyone, i have a code 100 combo and it has a FX loop so i use a D/O pedal in front as a preamp, the amp and cab and then i have the effects in the fx loop, sonds amazing and i'm very happy with it, now the problem is when i try to record with my PC using the USB conector from the Code into my DAW, the result is nice i have the great sound from the code but it doens't record nothing from the FX Loop so all the modulation effects, delays and revs cannot be record it, i can hear them when i'm playing but when i hear the track in my PC, all the fx are not record it, is there something i can do with it?, Thanks.

Hello, i bought Stanmore II with the Alexa app and when I ask her to connect to spotify she replies that she is not support it. I have followed all the nessecary procedures but it doesn't work.

Hi, just got a Code 25 amp and when turned on (even without guitar or cable plugged in) it makes an almost constant clicking nosie..   Anyone else have a similar issue?  This is my first guitar amp.

Thanks

Hello everybody

I want to buy a pedalboard Line 6 HD pod 500 x and I want to know if it is possible to use it With my code 25 ?

I ask this because on code 25 there is no fx return plug... 

Thanks 

hello there! i just wanna know if i can order the cord for Marshall AS50D on their website?thank's

Hi All,

I've been playing for awhile now, but no so much with amplification.  As a present for a recent celebration, I was given a nice Epiphone electric guitar and a Marshall CODE 50.  Problem is, the manual doesn't tell me everything I need to know, and the online "tutorials" on the Marshall site seem to be more like short overviews and demonstrations.

Does anyone know where there is a comprehensive guide to operating the CODE 50?  Like, lights/indicators, blinking vs. not blinking, other overall how-to's for the CODE 50?  Seems to be a really nice amp, but I feel I'm not unlocking all of its potential.

Thanks, in advance!

Paul H.

Colorado Springs

Why in my "My Gateway" tab, in the list of presets on the left (from 00 to 50) there is the gear symbol for the changes of the presets, but in the list on the right there is not? (from 51 to 99) I cannot copy the presets from the list on the right to My Library without that command !!

I recently started using the fx loop on my dsl40cr. I found that where the amp saves the fx loop setting (on or off) for each channel, and returns to that setting when switching using the buttons on the face of the amp, the 2 button foot switch carries the fx loop setting from one channel to the other when switched. Is this normal? I've seen videos of the 6 button foot switch saving and recalling fx loop settings just like the amp does. Wondering if this is just a difference between the foot switches? Thanks very much for the assistance!

Good morning,

i would like to connect my old Turntable to Stanmore2. I have an old Amplifier (the same chain of Turntable and CD Reading) but i suppose that i have to connect also a new Pre-Amplifier.
What is a correct configuration? Something like this?:

Turntable---->Amplifire---->Pre-Amplifire--->Stanmore2

If i buy a new Pre-Amplifier i could remove my old Amplifier from my chain?

Thank you!

I just bought a Code. I can connect via bluetooth however it won't download any patches because it says it's not connected even though it is. I bought the USB #2 cable (that doesn't come with the amp) and the amp still says it's not connected to my computer even though it is. Other modeling amps don't have this issue. Marshall, you REALLY dropped the ball on this amp.

How to add song from Spotify so you can adjust tempo.

Yesterday the power light on my DSL 40 went off, then came back on, then off again. It's been doing the same today.

Apart from this, the amp is running fine with great sound and all the other lights still working.

Is it just a bulb issue? And if so, how do I go about fixing this?

Cheers

Jack

Please help. I need a Marshall CODE25 user manual in Polish.
Please link to the instructions.

Would this footswitch work with this combo amp?

I would like some opinions on speakers to make this amp roll on Southern Rock and Blues.  Thanks for your input. Peace!!!!

Hey all,

Early last month I bought myself a Marshall Code 25 amp.  It's supposed to replace my old Line 6 Pod 2.0.

The Marshall Code amp came delivered with a dent on the bottom.  Also, and this is important, when turning the amp I can hear a small item inside it roll.  At the same time I could also hear a larger object slide.

So I thought this was probably due to heavy handling by the delivery company, so I sent it back.

A week or so later I recieved a brand new one.  This time no dent, the unit seems undamaged at first sight.  However.  The exact same rolling and sliding as I described earlier is happening inside the amp.  Is this supposed to be normal?  That would be one hell of a coincidence.

As I am a starting guitarist, I've been playing less than two years, I can't say that I'm impressed with the sound I get from the Code amp.
Whenever I increase bass, let's say over 5.5, the amp sounds really bad.  I hear cracks, fuzz, ...  It really breaks the vibe.
As I also don't have the best of guitars and I'm probably a poor judge in terms of audio quality, I can't say for certain that it's the amp.  However, the quality I got from the old Line 6 pod 2.0 is clearly better.  Not a whole lot better, but better none the less.

So.  Is my Code amp damaged or something? 

Hello, I just bought the CODE25 amplifier but I need the user manual in Spanish, how can I get it?