Hello!

I have an amplifier Code 25,

Tried to find any specification of the installed speaker Y1025J - 02.

The main question for me is:

1) Is the Code25 has the  full-range (20-20000Hz)frequency speaker or it a guitar speaker (70-7000Hz)? 

2) Can I replace the installed speaker with full-range frequencies (20-20 000Hz) speaker or only the option is do the replacement with specific (I meant for the guitars only)  guitar speaker? 

I see that is 25w 4ohm speaker, but nothing else to find equivalent for upgrade.

My thoughts are about any speakers, becouse the Code is modeling amplifier and probably the amplifier must produced all frequencies becouse of it. That why I am looking about extra spec information of Code processor working with all audio frequencies and send it to speaker or speaker must be specific as a guutar speaker and cut some unneeded frequencies on speaker level. 

Thank you. 

I had the opportunity to play on a Spark amp this weekend. They have a really nice app. Do you have any plans on updating your mobile app with more features like Smart Jam?

I have a Marshall Code 50 running MCU version 1.44 and Gateway (Android version 1.5.5) on a Samsung Galaxy S9+ running the latest OS. I can bluetooth pair to the amp and play music, but can not connect to the amp to change my presets from the library.  I have reloaded the latest firmware on the amp, deleted and reinstalled the Gateway app, paired and unpaired several times.  Nothing seems to work.  I even grabbed my old Galaxy S7 Edge phone and that Gateway app on it does the same thing.  Does my amp need to be serviced for Bluetooth connectivity?

hi, i got the marshall code 25, it stopped working when i connected it to my laptop right after i updated the firmware, i think there was a problem with the usb cable, now the amp doesn't respond to anything, and no sount comming out of it, i tried to factory reset stiil no responce, when i turn it on, i get on the screen marshall, then B0.6 , M0.0 , D1.1 , then CHK USB, now i was wondering if there is anything i can do to get it to work again just in case if the new usb wont work, please help

thanks

Hi, I am trying to find out any more about my JTM45 amp. I have owned this for over 45 years,  i have never made any changes to it.

Something that always puzzled me is the lack of any serial number on the rear panel.  I cant see why anyone would have made a new chassis, but there are extra unused holes and i can make out where someone has scratched on the type of valves  in each position. I am assuming its probably late 1963 as it doesnt have the 'coffin' lable but is a two tone cabinet as per the early kind. Also the knobs are different to others i have seen.

Also i can find no record of the model of speaker cabinet that i assume is also a Marshall cabinet, 2 x 12" speakers. Sadly the original Celestion speakers are long gone (my fault!)  I have seen one reference to an extension cabinet or boutique cabinet that looked similar, how ever it looks like the Marshall badge was at an angle on mine, though it was missing when I bought the cabinet.

Any help for the above would be great, many thanks, Martin

Bonjour, l'appli marshall gateway ne fonctionne pas : j'ai toujours le message suivant "context3D not available ! possible reasons: wrong rendermode or missing device support".

J'ai regardé sur le forum du site aux EU, il est préconisé de fermer l'appli, la désinstaller et la réinstaller.

Je n'arrête pas de faire comme ça depuis des jours et cela ne fonctionne toujours pas : j'ai toujours le même message dès l'ouverture de l'appli...

Que faire?

It had been just over a couple of month since my girlfriend had come back from the wedding in Wales, and in that time everything had changed. Hearing your girlfriend being brought to orgasm over and over again as she's fucked by some hot tattooed guy and his friends is not supposed to turn you on. It isn't supposed to make you grab your cock and cum, but it did. She knew it, and since that day she knew she owned me, my mind and my body.

She knew she could fuck any man she wanted to and there was nothing I could do or say to stop her. Being her cuck, she knew she could make me lick and finger her pussy, all the while making sure I knew she was never going to make me cum again.
https://freeonlineporn.me/category/pornstar-directory-sites/
When we were out she would openly flirt with guys in front of me, barmen, taxi drivers, random guys in bars, getting their numbers and telling me on the way home how she was going to send them photos of her pussy and arrange to meet them in her car, so they could fuck her brains out.

Hearing her tell me what she would let them do to her confused me so much. I hated the idea of her giving her body to someone else, but if I didn't like it why did my cock stiffen at just the thought of it?

Then the day came when it all changed. Hearing your girlfriend get gang banged is one thing, seeing it is something altogether different.

It began one Saturday afternoon with a simple text message. The notification on my phone said she had sent me a photo and as my thumb opened up the screen it was like a hammer had hit my chest.

She was stood in front of what looked like a changing room mirror dressed in the thigh high boots she bought since the wedding and leather skater skirt with her pierced tits covered only by the most see-through of black tops with what looked like electric tape in the shape of crosses covering her nipples. My eyes couldn't look away from the phone.

With red lipstick, her hair up in a long pony tail, while biting her top lip, her message told me to go upstairs and put on my cock cage that she had bought with the thigh high boots from the online sex shop. After that, she instructed that I must get dressed in baggy clothes, and to go about my day as normal and that she would be in touch with more instructions.

Keeping as calm as possible (which was pretty hard given how hot she looked in the photo, and the fact I hadn't been allowed to come for over 7 weeks) I got down the box of sex toys and found my cage.

Making sure I didn't get hard, I slowly pushed both my balls through the silver ring, followed by my small cock and taking hold of the cage, I pushed my flacid cock inside before connecting the silver ring to the cage and locking them together with the padlock. I then got dressed, in my baggy sweat pants and a t-shirt and with my heart in my mouth, I got in my car and went for a drive.

Driving no where in particular, I could feel the weight of the cage between my legs, pulling my cock down. Even as I was trying to ignore the urges, I could feel a message buzz through from my pocket. Pulling the car over as soon as I couId and switching the engine off, I looked at my phone.

As my screen turned to her picture, I could see her head was leaning back and in between her lipstick red lips was a thick throbbing cock with red stains all the way down from its tip to its shaved balls. The dribble of pre-cum running from his tip onto her tongue. Clicking to read her message, it said that she was with a real man right now and that she was learning what a real cock should feel like. She even teased that she bet my tiny cock wasn't even touching the sides of the cage she'd bought me.

I could feel my cock trying to get hard but the cage wouldn't allow it and the frustration was intense. I could taste sick at the back of my throat knowing she was sucking off a well hung man at the back of hers and all the mixed up feeling that was inside my head.
https://hotmyfreecams.com/
Time seemed to stand still and I tried to forget about it the best I could. I don't even know how I had ended up there, but pulling up outside my work, I pulled the handbreak, wound down the window and tried to work out what was happening. Before I could get far, I could hear the beep from my phone and another message coming through. This time, I could see the circle and triangle on the notification and knew she had sent a video.

hi i would like to esclude all the digital effekt and use on pedals how can i do it?

Hello All,  I need some help!

I bought an Marshall Emberton 2 weeks ago. 

When I swiched on it given a wellcome/On sound. Now ther is no sound, but everything else is working perfectly. 

Do you have aniy idea/hint What could it happened?

I bought a new marshall code 25 and plugged in my guitar to test if everything works fine. But when I touch a string the Amp makes a quite but annoying and strange "crack" sound, but only when I touch it. That happens when I even not play the string, it's enough to put your finger slow on the string. Also the Amp rustle when I'm playing but not when I'm not playing, is that normal??

Come somebody tell me please if they have the same problem or if that's normal?! 

Thanks 

How to see answers in forum? I tapped,double tapped nothing. I am signed in. Thanks

Goodness me!
I just unpacked my two brand new Stanmore 2 (Voice) speakers.

I am using an IPhone XS max on IOS 13.6

I successfully connected them to Google Home and can use this app to play music.
I successfully connected them as generic Bluetooth devices and can use them individually for Bluetooth audio.

BUT I cannot get Marshall's own IPS apps to recognise them!
Marshall "Bluetooth" doesn't recognise their existence when they are switched as Bluetooth input, neither does Marshall "Multi Room" when they are switched as WiFi input.

So Marshall's own apps are a FAIL
Apparently I need the app to be able to "Couple" them as a stereo pair, which was the reason I purchased two speakers!

Anyone else having a similar problem?
I did notice on the Apple app store a comment from a downloader who had experienced the exact same problem, so clearly this is a known issue for Marshall.

I have reported this to Marshall support but I have no experience of them so I don't know how responsive they are?

Hi Marshall team,

I want to use DI OUT of my ORI20H, but my question is:

DI OUT is the signal coming from just the preamp....or is the signal coming from preamp + power amp (so the one that goes to the speaker)??

Please let me know, thanks! 

I bought a Marshall Code 25 Amo just over 2 years ago. A slight crackling noise began about 4 months ago and has gradually been getting worse.

The amp now sounds like this https://www.youtube.com/watch?v=d8mBySo-xLo and is totally unusable.  Ive tried different guitar cables, a different power cable, a different socket (to rule out interference) and separate guitars. It's definitely the amp.

Amazon won't take the device back and cannot repair it.

Any suggestions as to what my next steps should be please? A device like this shouldn't last for only 2 years.

Many thanks 

Tony

While attempting to set up the footswitch (more help needed there), I somehow duplicated 01 So American over 92 19x12 and it is gone.  I liked both of them and have been unable to get back 02, even with factory reset of the amp and footswitch.

Any thoughts would be appreciated!

Hi,

I have found a weird thing that may or may not be known with iOS + Bluetooth and the Code 50.

The CODE 50 when playing backing tracks / using it as a Bluetooth speaker is very quiet (So the master is wacked up and the playing guitar is extremely loud). 

and the weirdest thing (which physically makes sense but still it shouldn't do it) is that the Amp is predominatly a Left speaker when playing music through bluetooth as my phone (iPhone 6S) thinks my amp is bluetooth headphones rather than speaker (as the headphone icon pops up on the top right). 

My amp is on the latest firmware update.

Is there any fix for this? There's nothing in the gateway app for audio balencing

Hi good morning I just want to ask if this product is authentic since its a marshall site is there any chance you can check if this code is real or not just verifying my marshall product both , here is the product code  7 340055301046, and 7340055309400.thank you 

soy nuevo en en manejo de equipos de sonido y efectos, quisiera saber como puedo relaizar preseets, desde my laptop y cargarlas a mi amplificador marshall CODE 100

Hi Marshall team,

so now I know I can use my origin 20 head without any cabinet connected, taking the sound from the DI out. 

But my question is...can I use it with the master volume at 6-7 (1-2 o'clock), to get tube breakup point and creamy sound, like I usually do when the head is connected (through an attenuator) to the cabinet? 

Is it safe to crank the volume (max 6-7) when using just the internal dummy load? 

Please let me know, THANKS

I used My Gateway to set up all my presets in the order that I'd like them to be.  My Amp is plugged into the computer via USB.  It is connected.  
Now that I've arranged things through My Gateway, the amp does not seem to sync with it.  

IF I pull up the app on my phone, while the amp is off, the library in the app reflects the order that is in MyGateway.  The moment I turn on the amp, and connect my phone to the amp, the library in my phone changes to reflect the old settings still on the amp.  

The only way I know how to set a preset in a specific spot is to go download it again, while my amp is connected, and dialed into the placeholder for which I need it to set.  

Is the sync a slow process?  Should I walk away from it, and let it sit and think for awhile?  Is there a button, or combo of buttons I should be pressing after I've saved my work in MyGateway, in order for it to update the amp?