Does any one have a patch that works well with pedals and cuts through nicely? 

I am having real trouble dialling in a tone that cuts through the mix for the rest of the band?

My drummer is heavy handed (as most are haha) and my Bass player likes to turn up to 11 - we are a 3 peice so its understandable that they play loud to fill the sound out as such - i have tried telling them to turn down but the feeling isn’t there while we play when they do.

I have tried most pre-sets and tried dialling in my pedals. Every time i find a nice base line tone from the amp the pedals sound rubbish, at every type of setting, it seems.  every time i think sod it and just use a pre-set and dial in my pedals reasonably, i get lost in the mix.

If anyone has a patch they use as a nice baseline clean tone that i can try i would be really appreciative.

Ta!

hello, sorry for my approximate english, i'm french .. I bought this little amp (code25). rather nice but I see a PB rather boring .....  if I use the quiet amp, in "standalone" mode without launching the app .... I am looking for a preset with the wheel, I play and hack the settings .... I finally my sound, cool , so I launch the gateway app to have a view of all parameters and can simply record ... and patrata, by launching the app, the amp starts on the preset number 1 and I lose all my settings from my preset precede ... rather boring. there is a solution so we can launch the app (after launching the amp, we do not necessarily launch the app all the time) without having a change of preset? thank you

Hi. I have a question: The Code USB interface is ok only with pc or it work with really usb midi? With usb midi pedal like Midi commander by Meloaudio, for explample, work or not?

if it work only with pc like daw is very very poor choise. next firmware? the orignal PDL 91009 is ok, but it's very very limited.

thx 

paolo

This is a follow up related to registration. Or, more appropriately, the inability to use the online website to do so. I managed web development and support teams for 35 years. Your answer is to email support...? Have you thought about actually fixing the problem at its source? To ensure your website is accessible and actually works? There have been many questions/issues raised related to this, spanning years. Do you have a development team? I'd be mortified if I were the manager in charge of this website. On the flip side; the amp is great! I love Marshall. Always have. This is just disconcerting. I hope I don't need any "real" support via the web. Something more complex as registration. God forbid. Sigh.

Dennis

I have a CODE 100h + CODE412 and I love them !!!!
I use a pedal board with different effects and was thinking of adding a looper / switcher (Boss ES-5 or MUSICOM LAB EFX LE).
I would like to know if with the looper I have listed I can change presets to CODE100H via midi. Do I need a USB / MIDI interface? Thanks

Hi my problem is the Marshall gateway app not connecting Bluetooth to my amp I've paired successfully to my iPad but it only sometime connects to the amp does not connect automatically very frustrating I've deleted app several time still the same problems do you have a update to help regards Rob 

Can I use 6L6 GC quad set in stead of 6L6 S.

Why can't I register my CODE 50 online? On the physical card it gives the website, marshallusa.com/warranty but that link does not work. In the forum you addressed that by telling us to go back to the dealer. WTF is up with that? Having to fill out that tiny card and mail it is BS. Unacceptable.

Dennis

Amp is a little over a year old was fine then past few weeks after warmup the volume would dump. All cables, inputs were checked and new JJ tubes put in which seemed like it fixed the issue However when I engaged the Tone Shift button the volume dumped again and when manipulating this button it caused the amp to crackle and seemed to be shorting out the power which intern was dumping the volume.. My tech replaced the Tone Shift curcuit but still when pushing the button in it causes the same issue, we are at a lost..and frustrated...Any Comments or Suggestions greatly appreciated

Dear,

I have a new Marshall DSL1CR and it make a popping noise when changing channels from the Ultra gain to Classic gain while playing.

If I mute the guitar, or changing channels from the Classic gain to Ultra gain or using the emulated out there is no pop.

There is same noise when switching off it.

Is it normal or somethings wrong with my combo?

Thanks & best regards.

I need a new circuit board for my Marshall 20/40 combo amp. I turn the amp on and it will play for a little while and then all sound ceases until I turn it back on. I've change out tubes to no avail and I broke out my old amp mod equipment and tested circuits. That's the only piece I am unfamiliar with so I'm thinking that's the issue. My vendor tells me they can't order it because the amp is discontinued. Where can I order one so I can fix my amp?

Is anybody else having problems 

context 3D not available ! Possible reasons : wrong rendermode or missing device support 

Is there any option to change volume with the PEDL 90008 ?

I know that it is possible to change volume by editing different presets. 

But I want to know if there is a way to change the volume with other methods.

Would be great if there were an FX  to change volume in switch mode.

The manual that came with the head says use output 3 when using a single 8 ohm cab. 

The online manual on the Marshall website says to  use output 2 when using a single 8 ohm cab.

I  have plugged a single cab into these both  at different times and output 2 seems to have more volume and treble than output 3

I am slightly confused and annoyed as shouldn’t  either 8 ohm output sound the same irregardless of which one I plug my single 8 ohm cab into?

I would appreciate some clarification so that I can use the correct 8 ohm output for my speaker cab!

Update to my original post as I  have an additional question related to rear speaker outputs.

The third output speaker socket and the revised manual show this as output for 2x16 ohm. (Mine has the modified sticker attached)

Does this mean:

a: that you can plug two 16 ohms speaker cabs which have been set up in parallel into output socket 3 and the power amp sees a total of 8 ohms? .

b: output socket 3 already internally wired in parallel with socket 2 and such you plug one 16 ohm cab into socket 3 and one 16 ohm cab into socket 2, for a total of 8 ohm impedance?

c: Not sure what else could be possible?

Could you please confirm which is the correct approach? Thanks, Ross

Has anyone any settings for Rory Gallagher or Derek Trucks Slide?

Good day. Yesterday I bought Marshall Mode EQ headphones and ran into a problem.
Smartphone ASUS Zenfone 4 max, Android 8.1.0. When the headphone cable is shaken while listening to music, the volume on the smartphone spontaneously decreases. What can you advise?

Hello,

I purchased a code100H head and cab last year and I love it very very much.  (I am an enthusiast and use it to play music via PC)

I would like to upgrade and buy a second cab in order to make a "tower", for example this 8ohm cab https://www.thomann.de/ro/marshall_mg412bg.htm

Question

Can I connect both cabs to the same amp considering the code 100Head has a single 8ohm output?

Is there a safe "trick";

do I need to purchase a second amp;

what are my options?

Thank you kindly,

Adrian

I have seen a couple of questions pertaining to usb connection from Code USB to iphone or ipad for recording in garageband, etc. 

The answer given by Marshall reps was the same for both and that something about difference in usb 2 and lightning cable.

My Question is: Will an iphone camera connection kit correct that issue? It has the female end input of USB on it.

I use it to connect my Arturia Keylab Essential to my ios apps and it works fine. 

I’d hate to damage my Code 50 though so I came here.

Hoping for a speedy response.