Hello, Experienced Ones, I need some guidance...Recently I was able to purchase a 212C extension cab for the 410 combo...This is a big upgrade for me and I don't know anything(it seems)...What is the proper way to connect the 212 to the 410? The 212C has 2x12's...I see the possible cab connectors in the back of the combo and I definitely don't want to choose the wrong one...Just had the 410 re-tubed and biased...Help, Please!!! Thanks!!!

Dear Community,

is there any known workaround to overrule the output level of the headphone output?

may be another Firmware from non EU countries or hidden functions or cheats in current Firmware?

I know, its possible to connect a separate headphone amp, but that is not my intension to do.

thanks in advance,

Peter

Hi!

Can I record sound connecting my Ubuntu Linux 18.04 via USB cable?

I think the Ubuntu does not recognize Marshall Code 25 as a recording device. I tried without success. Can you help, please?

Fábio Peruchi

Brazil

USERS MANUAL FOR THE MG100HDFX

I mean probably i could make something like a fuzz pedal but it would be great if the amp alredy had one

Just bought one - any ideas which flightcase (or padded head cover) would fit?  about £75 - £100 is what I think is a reasonable price  cheers Steve

I couldn't resist!!!

It ACTALLY EXISTS (evidently)!!!

After all of this time trying to ascertain whether or not these things were available (or even existed) I found this on eBay last night (the ONE AND ONLY ENTRY for, AND IMAGE of, this footswitch ON THE ENTIRE INTERNET) (aside from, of course, the usual descriptions that the CODE100H was SUPPOSED to be supplied with this footswitch which, to date, has never been confirmed by anyone) (at least not to me).

I did, however, happen to also see a post where somebody has been supplied the WRONG footswitch with their CODE100H!!!  Well: below is what you SHOULD have been given!!!  LOL!!!

Anyways.  Didn't buy it.  Just thought I'd share!!!  LOL!!!

Regards,

Dale.

Hello TEAM MARSHALL.

I'm curious about something:

It only ocurred to me last night that maybe, just maybe, replacing the Master Volume (and in my case, on one of my five amps. also the Preset Volume) pot. with a new or replacement (generic, higher quality) pot. would solve this Master Volume issue once and for all.  So to this end I started scouring the Internet only to find that there is not a single supplier that I can find that supplies spares for the CODE amps.  There's spares for just about every other Marshall amp. known to man (including the MG series) but nothing, nada, for the CODE amps.  and this INCLUDES the Marshall store itself.  Your input and thoughts on this???

Also: how difficult would it be to obtain the specs. etc. of the amps. e.g. what are the specs. of the pots. (particularly the Master Volume and Preset Volume pots.)???

Regards,

Dale.

how can i download marshall vertual amplifire for guiter in pc?

I bought a Code 100 a couple of days ago, played it at the store with my Ibanez and worked perfectly for 10 minutes, decided to take it with me.

Took it home, plugged it in my room at 1/4 of the master volume and whenever I play I experience random sound losses, especially when I play lower notes, it buzzes and the sound drops to50%..or 20%, sometimes drops to zero. Then also regain 100% sound randomly, I don't know what's going on...if I strum a chord and let it ring and then ever so slightly give a little tap on the top of the amp - it sends interference noise and sometimes with a single tap the volume drops to zero...and then to 100 with another tap..and I mean giving a tap really gently, not punching or slapping the amp.

I've tried different sockets around the house and the issue persists, what can I do?

I recieved the usb cord for my Code 50 today but no matter what I do it says code not connected.

I even tried the pressing pre fx,mod,rev buttons while turning on the amp but it says code not connected on the amp and amessage comes up on my laptop that says driver not recognized

my pc does not detect the code 50 amplifier. What can I do?

Does anybody know when Code firmware update is expected to be released?

Current version causes serious issues with Bluetooth reconnecion after the amp is swiched off.  Also Master Volume does not work evenly and my CODE 25 is definitely too loud for practising at home.

Does anybody know when Code firmware update is expected to be released?

Current version causes serious issues with Bluetooth reconnecion after the amp is swiched off.  Also Master Volume does not work evenly and my CODE 25 is definitely too loud for practising at home.

Hi all, 

the presets on my gateway app seem to have changed, they are different then the ones in the amp? Any ideas how to change them back?

thanks

Hello...I purchased my JCM 800 (serial#02726N) back in the Fall of 1981. I pulled the rear plate off the head for the first time so I could install new tubes for the first time. I expected to find four EL84's, but was totally surprised to find 2 KT66's, and 2 6L6GC's instead. Is this normal? The amp sounded totally different from other Marshalls I was exposed to, now I know why. Did Marshall do this often, or did they just run out of specific tubes and slap in whatever they had on hand. It's kinda hard to believe they did that as the KT66's require an entirely different transformer than the EL34's. Any comments or logical explainations?? Thanks.

Hello, I would like to connect one of my PCs (OS linux) on a Marshall CODE 50 and take control via usb midi.

When I open /etc/dmmidi2 in read acces. Reading file char by char, I see information when I touch the buttons of the amp (PREFX, AMP, MOD, ...). I can find the information in CODE-Midi-Implementation-Chart-V2.1.pdf.

I usually get two or three bytes and cross it with the document.
But this frame is not in the form Start of Transmission> Header> Command> End of Transmission.

By against when I open /etc/dmmmidi2 in write access, I can not send any command.
After having turned on the amp, I sent the following sequence for RECALL PRESETS 05:
0xF0 0x00 0x21 0x15 0x7F 0x7F 0x7F 0x73 0x01 0x05 0xF7
or RECALL CURRENT SETTINGS:
0xF0 0x00 0x21 0x15 0x7F 0x7F 0x7F 0x72 0x01 0x00 0xF7
Start of Transmission> Header> Command> End of Transmission
This command does not seem to work. Is there an intermediary step?

Would it be possible to give me a typical sequence to the CODE or a document that will explain the procedure to operate (ON / OFF) one of the button (PREFX, AMP, MOD, ...) of the amp.
Thank you in advance.
Cordially.

yoann

Hello -

Just getting familiar with my new CODE 100w 2x12 Combo - and noticing that when I am in Gateway/Playback that I can navigate to my

Apple Music and choose/load a song, however when I push play NOTHING happens. (???) ...was wondering if there is a step I'm not aware of

or if this is just the app malfunctioning?

thnx in advance -

Michael Wade

hola a todos alguien tendria para pasarme como configurar un preset Joe satriani

hi coud you send me a presset joe satrian

TKs