When I connect the headphones to my computer with a cable, I can't stop or start music with the buttons on the headphones, switching music doesn't work either, only volume. When I connect via bluetooth everything works fine. I would like to know if this is the way it should be and if not how to fix it.
Hi
I have just bought a code 25 that is in excellent condition. although 2nd hand it worked until i activated the blutooth It has the problem of once the blutooth activates it turns the speaker off. I have done the latest firmware updates and it still does the shutdown.I see this is a common problem and i can see it has to do with the bluetooth activation. How do i sort this out or how do you turn the bluetooth off. I can however use the tuner so the input is ok
This is very annoying for my 1st Marshall amp as i have always used Fender amps.
regards
Peter
hello sir, were can i produce/buy programmable microprocessor od DSL 40CR .the part number is DFXP-90004-V1.5
Hello, I live in Korea. I'm looking to buy a German or permanent Marshall Amplifier here. But the voltage of the German and British Marshall Amplifier is 230V 50hz. The voltage in Korea is 220V 60hz
Is it okay to use the Marshall amplifier that I bought directly from Germany and the UK as it is in Korea?
Will there be a problem with the voltage frequency? The amplifier I am trying to buy is a Mashall SV20C model. I will attach the SV20C manual below
Please answer. Thank you
Salve, vorrei controllare l'originalità di un prodotto, voi sapreste aiutarmi?? 73400553l11297A8975 questo è il serial nimber scritto, grazie
Could you please help with two problems with my amplifier Marshall Code 25?
The first and more serious one is when I turn it on, the sound is ok, but 15-20 minutes later sound dissapears. To make it sound again I need to turn it off and on again or plug and unplug my headphones cable, then sound works again.
Another problem is with the screen. The screen lost its brightness. When I turn it on, the screen is bright, letters are seen clearly. Several seconds later it loses its brightness. It is still orange but the letters are far less bright.
What might it be with my Marshall Code 25?
Do you have a manual for it that I can download?
Hi Marshall,
I have a Code 100 Combo amp which is now out of warranty as was purchased in 2020.
The guitar jack socket and usb connector socket appear to have sunk a bit so am struggling to connect my guitar or to my pc.
What could have caused that as have not used any excessive force when plugging my guuitar lead in and the USB cable has been plugged in for ages as is in my practice room?
Can I attempt to fix it, if so how do I open the back, does it use an allen key as doesn't look like phillips screws?
Where in the back should I be carefull to avoid to not get a shock (even though the unit is fully unplugged from the mains?
Hi all, wondering if anyone please is able to provide a photo of the circuit board for their Code 50 (even perhaps 25 or 100)?
Mine has died, and I don't believe a schematic is available. A friend of a friend has very kindly offered to look at it for me, and has discovered that a transistor and resistor have burnt out. The transistor he is able to replace, but as the resistor is destroyed, he has no idea what value it is.
I'm hopeful that if I can get a photo of the board showing the resistor inthe R10 position, he will be able to identify and replace it. i loved some of the sounds my Code 50 created, and would be very happy if it was working again !
Many thanks for any help that can be provided.
Best wishes from Australia,
Brian
playing last night and my amp suddenly got alot quieter lacking power in the power one position, I usually stay in 1 because my room isn"t very large, lov e love love this amp, but something has happened, I don't ever drive it too hard..please advise!
Hello!
I'm trying to see the amp's specs, but this happens:
Can I get the official specs other way?
Thank you.
I have an Acton II and a Stanmore II Bluetooth speaker that I would like to couple together. I found this support article with a chart of which speaker should be able to couple, and these two are listed. ?
I can pair each of them to my iPhone, and also add them of them into the Marshall app, but after I choose one and select the option to couple the other speaker is not listed.
I found another question where the user was having problems with this process, and also tried following the suggestions there. However, each time I try both speakers never appear in the box to couple. I'm beginning to think I have misunderstood that chart in the support article. Does anyone know if I can couple these 2 speakers, and if so, how?
Infelizmente de uma hora pra outra ele fica mudo mas ligado... Já tentei atualizar, trocar de tomada e nada adianta... Alguém conseguiu resolver?
Meu code 50 não deixa acessar o bluetooth, não libera pra resetar de fabrica, não permite editar efeitos através do digital,único que permite acesso é o botão pre
I just bought a brand new Marshall code 50 amp for my guitar, but when I connect the cable to the input of the amp I have to push it in to work, one end of the cable needs a push so the amp connects to the guitar, but somehow the other end of the cable connects only if I hold it pushed in the amp, if I let go it disconnects. I use a Boston cable and I don't have that problem on my other amp (marshall mg15gfx). I did the last filmware updates and reset my amp 1 time. Since 1 end of the cable works, is it a big deal or can I just continue to use only the part of the cable that works? What should I do?
Hi there,
Could you tell me if there is a way to power the internal 16 ohm speaker on my DSL40 and simultaneously run an 8 ohm Marshall 212a? What outputs would the speakers need to be connected to?
Hello, I'm looking to see what year this amp was manufactured ? The serial # is S/A O8553K . I found it in a garage sale, and I can't figure it out when searching around. I believe it's 1977 or 1978. Thank you.
Wondering if the DI out of the silver jubilee is an emulated out, or is it a clean, dry signal? What about the send? I am wanting to record a unaltered signal from the jubilee and wondering which one is best to use for this.
Thanks!
Hi,
How can I buy replacement 'handle bracket covers'
the 'black, plastic, rectangle, handle screw caps'
for the Marshal 10 watt MG10CF?
Thanks.
Andrew.
Australia
1) Is there a way to sharpen the pick attack tone when the amp is on Ultra Gain 2? It has a dull, muffled attack. I've increased the treble and presence but this is no true remedy. I keep the drive setting at 12:00-1:00 on UG2.
2) Is there a way to reduce the deep compression when the gain is increased on UD2? It's a shame I can't have more drive and sustain in this condition.
I love the tone of the amp but I'd like to clean it up.
