Hi I just bought a code 50 and when i try to plug USB cable with my computer (mac pro), evrytime i saw that so it is impossibe to change preset.
I have no trouble recording directly from Amp into GarageBand, but when I open Logic Pro X, even though Code is selected as input and output, when I go to record it tells me that there is nothing connected. I don't what settings I could change for this and it works perfectly in GarageBand. Thoughts?
Just bought the 50. I have done the hold the 3 buttons down while turning it on to see the current version. I then connect the USB and it says USB connected Ready to update. But when I try to update from both the browser and the utility, it says "please connect your code". I have made the config changes on the troubleshooting site, and used 2 different laptops and 3 different cables but none of them will push the updates. It won't show the Code as being connected for some reason.
Anyone have an idea of where I am going wrong? I don't have any Chrome updates to do, and I am stumped. I don't want to have to return this if there is an easy fix.
Thanks in advance!
How do I set up my new CODE50 USB to my CUBASE9? "CODE" shows up in CUBASE Inspector for MIDI Tracks, but no signal.
Do I need a CODE driver?
Does the CODE50 USB only send MIDI?
Does it send audio waveform signals?
I viewed a couple of Marshall video tutorials that didn't help and it says practically nothing in the download manual.
I got a Marshall Code 50 a few days ago. It is so much more than I expected. There are more than enough presets to mess with. Some are pretty crappy, but there are abunch of good ones worth tweaking. I've read a lot of comments saying that the amp is crap, the presets suck,etc With so many editing options available, if you can't find the tone you want, you shouldn't be messing with modeling amps. There is plenty of power for my needs, and seems to sound good and consistent through a large volume range.
The stuff I don't like:
1) Why couldn't you use a 1/4" headphone jack instead of the mini?
2) Why couldn't you use a USB normal sized plug instead of miniUSB? You didn't know that miniUSB is almost prehistoric now? I had a tough time finding an adaptor here in Sao Paulo. If I can't easily get ancient technology here in Brazil, the connector must be extinct in the real world.
I've started messing around connecting the amp to my DAW Logic pro and recorded some stuff. It's got potential
I have the My Marshall app paired with my CODE amp. I have my mobile device (Samsung tabket) connected to the amp via a Micro USB cable but still receive the not connected message. I can't download any user presets.
This isn't really a question but a solution to your problems connecting the Code to Studio One for USB recording. I got it to work using ASIO4All.
Here is a quick 2 minute video I made showing how: https://www.youtube.com/watch?v=LC1FAeFyRn8&feature=youtu.be
Marshall, feel free to point people here if they need this solution. Presonus just points them back to you.
I just bought the Marshall Code25 and tried to update the Firmware via USB.
I have launched the firmware update from the Chrome Navigator and from Windows firmware application. After update performed, Code25 remains to version 1.11 and firmware indicates my CODE firmware is up to date.
I have notice during the update than first, the version 1.41 is installed (MCU firmware 1.41) and just after a second update is launched installing the version 1.11 (DSP firmware 1.11)
Is it the regular behavior ?
After the update I still have troubles on bluethooth pairing, even if I read this problem should be solved by the update.
Thanks for your help
I have a code 50 with the USB cord to record audio, does anyone know how or if I can even do that?
My son has a Code 25 and the preset knob stopped working i had a look at it last night and tried the firmware update from the web site now it wont do anything and just says check USB. has anyone had this problem or have a solution.
thanks in advance
Hello using Android Tablett the Code25 wired with USB cable gives Info that IT IS not connected.
Also one question to my Gateway and my Marshall, are this two standalone Systems? how can my library from my Marshall be used in my Gateway. In my opinion all this ist a litte bit to confusing.
Hi, I’m having trouble getting sound from my Marshall Code 50 amp to record on Audacity.
I am running a new, working USB B cable from my Marshall Code 50 to a Dell Latitude 7280 running Windows 10. The computer is able to detect the amp USB input, and I am using the ‘CODE 50 digtal interface’ as my default recording device on both my soundcard and Audacity, however there is no sound output coming from the amp shown on Audacity , when I try to record (sound is produced from the amp’s speakers, however Audacity is not showing or recording any sound output). I am sure that the connection is working and the amp/ computer is not faulty, as I am able to download tone presets from the MyMarshall preset page. I have tried restarting both my laptop and amp multiple times, using different cables, using different USB ports, AND have the newest 1.41 CODE software, newest Audacity software, and newest version of my Intel HD sound drivers, but to no effect. I am on the verge of going insane from this as I have being trying for over 10 hours, and have had no results. This has worked for me previously, as I last recorded to Audacity with all the same settings about a month ago, however it’s simply not working anymore. I need to get it fixed ASAP, as I am due to record tomorrow, so any help would be greatly appreciated.
I timed it.
I’m not looking for trouble, im just looking for customer service. I’ve got far better use for my time then sitting on this forum, trolling for answers that will never come—unless YOU, Marshall Amplification changes, which is highly unlikely. You guys are going to be getting a very brutally cold visit from me at the NAMM show!
After going through the entire Blootooth connection process again, which takes like anywhere from 5-10 minutes to get connected, I went to the MyMarshall.com website to download some of the interesting amp models which other users have taken their time to create (thank you to all who have fond this!) When I download, it goes to my actual login like it’s supposed to, but how do I get it from the mobile device to the amp? Your video isn’t clear, but do I have to have my device connected to the USB of the amp? If so, when is the frigging purpose of having Bluetooth then? If not, what am I doing wrong?
I await for your robotic response. I’m sure I’ll still be right where I’m at after it comes!
bought my marshall code 50 last nov 2, 2017 . When i connecy my Code50 to my computer , says USB on Code50 but nothing happens in my computer . not detecting or any. cannot find it on Device Manager . my usb mini cable is new btw.
I have a Focusrite Scarlett Solo for home recording to my PC. With my previous amp I was running from the direct output to the sound card. With the Code can I go straight from the amp via the mini USB to the PC?
Can I connect to my code 25 via USB to my RCA Voyager tablet cause I can't Bluetooth to work
I have a Code 25 and a windows 10 computer and I have tried everything and I can not get the amp to connect to my computer via USB. Does anyone know why? If anyone knows why please help!!!
I cannot use the Gateway app and USB connection together. If my Windows 10 laptop is connect to the amp via USB while the Gateway app is running, it freezes the controls settings in the amp and the app. I still get sound, but I cannot change presets or edit presets on the amp or with the app with the USB connected. I have to disconnect the USB cable to be able to use the app, or the amp controls. If I want to use USB, I cannot use the app. If I want to use the app, I cannot use USB. Any ideas?
I have the latest firmware and latest version of the app. I have tried disconnecting and reconnecting bluetooth connection. I've tried restarting the computer. I've tried disconnectiong Bluetooth, shuting down the amp and the computer, and starting everthing up again. Nothing helps.
When I try to hook my amp to my laptop, a box appears at the bottom of the screen that says code 50 not connected. I'm no computer genius and I'm sure I'm missing something simple but, how do I get it to connect?
I hope someone can please help me here.
I have tried to use various methods in connecting my code 25 via USB to my windows 10 with no luck.
Can someone please tell me how I can do this because I just purchased the amp a week ago for primarly recording and I cannot get it to work.
It played my track out of the code speaker for a moment but thats all. I continue to get errors from windows saying that the USB is not recognized,
I have ASIO drivers installed and use reaper as a recording interface.
Please help! I would be much appreaciative !!!