Tons of spam, millions of spamers, and nobody to take care about this... 

In many cases I'd like to give an advice, but recently 9 of 10 threads are infected with links to total shit and I've got no idea whether this questin is real, or fake...

I am experiencing terrible interference when trying to use my Code 50  via Bluetooth / Gateway (Apple) App while recording on my Mac in Logic Pro X.  I am using a microphone to record the Code 50 and using the Bluetooth Movies series world to change patches.  The clicks/pops/noise/interference is loud enough to interfere with the recording process.  Perhaps a DESKTOP (Apple) Gateway App via Code USB might be a solution for all users experiencing similar issues?   I am running the most current Firmware.  Any current solution to my noise issues? 

Thank you. 

I'm looking at buying a Marshall amp. The head I'm looking at is Marshall MG100FX I've found one on craigslist with a half stack 4x12 for $300. Anyone one have experience with these amps? Is this a good price for it? Any words of wisdom would be great! Thanks guys.

Hello everyone,,,

I haven't seen them mentioned Watch Movies Online here once. I saw a guy CyberGhost wearing one of them on an airplane ExpressVPN once and they looked really nice. I'd love to learn more about them purely out of curiosity....

Thanks ,,,,...

Hello everyone,...,,

I was wondering if you could help me with a problem that I am having between my Code 25 amplifier and the Gateway app. I am able to pair my android device and the amp via Bluetooth just fine but once I am in the Gateway app it doesn't detect my amp at all, even when I press "scan for amp" it just says no amp detected. 

I think I should add that I have been able to connect it to my apple device without any problem at all.

It would be highly appreciated if you got back to me.

Thank you......

Like the title says - I'm wondering if its possible / safe to run the Origin 50 head with the DI connected to a recording device and not connected to a traditional speaker load.

Thanks

I was trying to jam along with youtube so I plugged in my iPad to the "audio in" input of the amp.

Volume of the iPad is cranked to max.

I noticed that the iPad can only be  heard when the volume of each channel are turned up.

Problem is, especially in Ultra Gain Channel, the iPad will not be heard until the volume of the channel is set to pretty high (pass 9 o'clock), meanwhile, my guitar sound will be very LOUD that will cover the jamming track and also cause serious air to my neighbour (basically I only hear my guitar and cannot hear the iPad which is connected to the amp throught the "audio in" input).

Solution to the above is very much appreciated.

I have a CODE 50 which I L-O-V-E except for one thing. Effects are not as easy to utilize as stomp boxes.  I have seen on YouTube how Code owners ckearva pre set “turn everything off” then utilize a whole friggin pedal board. I have tried this and it does not work. Actually more appropriately I’m certain I did not do it right or it would have worked fine. Can someone PLEASE list a step by step on how to clear an existing preset to where it is just a “plain” ol’ regular  amp.  THA K YOU IN ADVANCE. I’m beginning to feel as if this purchase was purely a novice mistake but I would love to keep this Code but have the option to utilize my modest pedal board if I do choose to do so. THANK YOU!!!

Today I connected my Code 25 to my MacBook Pro to record in Logic Pro X but when I connected it, it went into TEST MODE (which I've never seen before) and I could not record any output from the amp.  I unplugged, and restarted both the computer and the amp - same thing happened.

I had my phone hooked up by Bluetooth to control the settings, but I've done this many times in the past and never had this problem.  Ideas?  Solutions?

Hi there everyone, it's my first post here. I just acquired (2nd hand) Marshall VBA400 Bass head amplifier. It sounds really great but I just want to ask anyone from here has got the same experienced with an audible "humming sound" when the Standby Switch is turned ON... is it normal for this model? one more question, when i got the VBA400 it comes with Marshall MG412A speaker cabinet (4x12")... are they both match to use technically? 

My first post here, so apologies if I'm out of line on Forum protocol!  I just bought a used MG250DFX used on Reverb. It's my first Marshall after a lifetime of dreaming of having one!

Where could one find the original owners manual if there is one for download, as well as find out what type of speakers came with the original unit?

https://downloader.vip/rufus/ 123Movies https://ovo.fyi/gomovies/ 

i purshesed marshall code 25 about 8month back, now when i turned on all binking lights are blink and than off... after on no lights are blinked in any presets... reset amp, update firmware... not done anything!! atteched some of pictures!!

I've seen sales for various MXL Lorem Ipsum condensers at Guitar Temp Mail Center and Massdrop 10 Minute Mail recently and was wondering if anyone wanted to offer some input. There's very few reviews and none of them really offer comparisons to similar products in that price range (i.e. the Behringer C1).

Their prices are really low and while "you get what you pay for" holds true most of the time, there's always a chance to find a diamond in the rough.

So i can get a good deal on the  Marshall Stanmore speaker (130€) Has anyone here had experience with this speaker in particular? Can you recommend it?

I was wondering if this a good choice for a intermediate player  (the only amp I have is a fender 20watt amp) and I would like to hear the pros and cons of this amp.

I've had my Code amp for a couple of weeks and managed to connect it to my iPhone which is running the latest ios 10.2.1.  I also got it to connect to a brand new Samsung Galaxy Tab A running Android 6.0.1.  The connection didn't always work and sometimes dropped out.  I've updated the Amp to the latest firmware to hopefully cure the connection issues and now my phone and tablet just can't detect the amp at all.  I've tried turning on and off, resetting everything, forgetting the device etc. etc. but it's like the amp just doesn't have Bluetooth.  As no device can see the amp then Gateway just isn't possible to use as it also can't detect a phone or tablet. My devices can see each other but it's like the Amp just doesn't have Bluetooth.  I've also tried searching for it with an Ipad but this also couldn't see the Amp ?  It looks like the Bluetooth has died on the Amp but thought I'd ask if anyone has any ideas of anything to try or otherwise I'll have to take it back to the dealer and either try another one or replace it with a Fender Mustang.  It's a good amp but seems to have to many glitches at the moment looking at the forums.  I'll give it one more go though if anyone has any suggestions to try.  Any ideas anyone ? Many thanks for reading.