I recently bought the Marshall code 25. I have a constant interference problem which makes the amplifier unusable.

There are crackles, after trying several places in my house I realized it was because of the wifi. And if I remove the wifi I hear a radio on my amplifier.

Does anyone know if there's an adjustment to be made or is the amplifier defective?

I have a Code 50 that is one year old. this week it started having some high pitched noise. after a couple days of that the volume would go to zero after a few minutes of play. have to cycle the power to get volume back. it only has volume for a few minutes then it goes to zero again.  help.

Hello,

I have had this AMP for about 6 years and love it. I have been using the FX Loop with the current pedals for a few years now. Suddenly maybe 8 months ago I noticed the signal would be become unstable... I thought it was one of my older pedals. Recently after letting it sit for a few weeks, I noticed the volume would fade to nothing or to near nothing and very treble/tangy like. A few days ago I was playing and I could hear the volume gradually restore to normal... tonight I was messing with it and the sound went to nothing and without warning came back almost blowing my ear drums out. Anyway, I have discovered that the amp works fine if the FX loop is disengaged. Once I put it on it has no volume... which seems to be worse than before.

I have a DSL40C

Kindest regards,

MjM

I have a new CODE 25. It's automatically connecting to my phone with Bluetooth even when I don't want it to. Can anyone tell me how to turn off Bluetooth on the amp so this doesn't happen? Each time I disconnect it keeps reconnecting. Very frustrating. 

1. Ive recently purchased emberton 2 in the official store  one of my friend checked it and he said it was fake please tell me how to spot the difference in emberton 1 and 2 vs fake thank youu

Good morning,

I have a code 50 (new, never used); the light on the LED button flashes without me touching anything, I have to press it so that it stops flashing (and therefore it lights up) and this for each preset selection. Can you tell me how to resolve the problem? 

Thanks

Bonjour,

j'ai un code 50 (neuf, jamais servi) ; la lumière sur bouton DEL clignote sans que je ne touche à rien, il faut que j'appuie dessus pour qu'il arrête de clignoter (et donc il s'allume) et cela pour chaque sélection de preset. Pouvez vous me dire comment régler le problème ? 

Merci 

Hi All,

I'd like to know when was the TSL line retired, Yesterday I got a TSL100 made in Late October 2010 according to the Serial number.

M-2010-43-0003-1 this tells me year 2010, week 43 (last week of october), 0003 unit number, is this unit number for the TSL? My TSL seems to be one of the last ones made, I guess.

because it is funny is that My JVM410 Serial number is M-2010-33-0619-1 this tells me year 2010, week 33 (second last week of august), 0619 unit number which is higher, would this be only for the JVM?

Cheers,

Andrés

For the past week, I have noticed that my CODE 50 display will come on at full bright, but after 3 seconds it fades to a point where I can barely read it.

Is there a process that I can follow that will correct this?

Thanks!

Mark

After using Minor III  by use wear only one side per time for 2 or 3 days, my phone can't connect to the left side. I decided to unpair then pair again, I can only pair to the phone but can't connect to the in-air and  bluetooth system say "An app is needed to use this device". I also uninstall application then install again but can't fix this problem. How should I do?

Thank you,

View

hi ,

i bought a stockwell 11 mini speaker and its blue tooth has stopped working.i am trying to download update ( that i dont want) and it does not work.tried  pressing button 5 and 15 seconds.what can i do?

malcolm

hi ,

i bought a stockwell 11 mini speaker and its blue tooth has stopped working.i am trying to download update ( that i dont want) and it does not work.tried  pressing button 5 and 15 seconds.what can i do?

malcolm

OK so I have been messing around with the 4 way footswitch, settings, and other ways to boost the volume of lead playing vs rhythm playing while live. I have already tried tweaking my volume settings in the app, and boosting the OD effects level as high as it will go, and there still is not a discernible difference in volume when playing live or at practice. I am wondering if I can just add a volume pedal inline between the guitar and amp to rectify this. A previous post I had on here someone told me to advust the volume setting per patch, but the problem I run into is when I set the main amp volume, it saves all the way across the board, and I cannot save individual parameters- for example, if I set my FS control to no OD on switch 1 and the volume in the app to 3, then turn on the OD and set the level of OD to 9.9, it does nothing in the way of significant volume output. I find myself tweaking the master knob in rehearsal to get the volume up. 

So I am assuming a volume pedal is my only alternative. Unless I am missing something here. I don't see a way to boost volume for a solo unless I want to duplicate the bank and then boost the volume on the adjacent bank and flip between the two? Is that the only solution here?

bonjour, j'aimerais épuré ma base de données sur gataway, comment procedent-on ?

When I try to connect my Marshall Code 25 to the computer, nothing works. I tried connecting it to my laptop but it was no use. I bought a wire yesterday that supports data transfer, can you tell me something?

I want to add my device to the Marshall Bluetooth app.

I keep pressing the button on the case as instructed, but the blue LED doesn't blink. (Nothing just happens.)

Double-click to turn on the orange light and press the button to turn on the green light.  I can't see the blue light blinking... ioi

The device and my phone are paired, so you can listen to music.

But I want use the Marshall Bluetooth app by adding my device.

How can I add my device via bluetooth mode?

Good afternoon.

I have just acquired a vintage Marshall Speaker Cabinet, serial no 06615. I am trying to identify the cabinet / model type / year of manufacture & speakers. I have learned I will need to access the speakers themselves, but access to this seems to be only from the front. Do I need to remove the screws from the front to access, and does the white beading around the edge of the grill need removing, or will it come off when I remove the grill? Don't want to cause any damage, hence asking for any help!! Also, the colour (same all over) - is that a standard colour? And finally - am I likely to find 2 or 4 speakers in the cabinet!? Many thanks.Rob

Is it possible in Gateway to switch between Guv'nor, ODR and Distortion effects?

If so, what are the steps to change between these effects?

I would like to know the precise placement and function of the valves in the JVM 1H 50th Anniversary Limited Edition. I know there are two ECC82 and three ECC83 valves. But I don't know what they do and where they are located in regards to the front or back of the amp (i.e. from left to right and from front of the amp to the back).

The registration link noted on the card which came with the product doesn't work.  There are several people posting the same question but I do not see an answer.  Someone please tell me how to register my new amp?  Thank you.

Hello forum friends! Do you know if Marshall has stopped manufacturing the Gold: MG100HFX series and the Carbon: MG100HCFX? If production has been discontinued, does anyone know when the last units were built and whether there will be a replacement model?