I had my marshall code for around half a year now and recently something has been going on with it. I use a Macbook Air with Logic Pro X and for some reason everytime I connect my CODE to Logic and try playing something, the second I touch the strings my Bass, Middle, Treble and Volume automatically go to 0.0. I have re-installed the Firmware and did a Factory reset and still nothing changed.

I recently picked up a CODE 100 amp and plugged it into my macbook to try to record using GarageBand. The program recognised the amp so I set both input and output to CODE and was not getting any sound, not even the metronome. Eventually after thinking about it I realized that output was set to CODE so I turned up my master volume (had it all the way down because I wanted to hear the laptop not the amp), and all of the sound including the metronome were coming through the amp speakers. Then I figured out that I could get audio out of the laptop by changing the output to Built in output. Now I am having the same issue on the iPad and can't figure it out. I have a Camera adapter that allows me to plug USB into the iPad. When I connect it, the iPad recognizes it and asks if I want to turn monitoring on, I do. All of the sound, previously recorded tracks, metronome all of it come through the amp speakers. I want the monitoring to output to the iPad speakers, but I cannot find the setting to accomplish such a thing. Any Help would be greatly appreciated, thanks.

Hello, I bought a Marshall Code 25 a few weeks back and it was working perfectly until I tried connecting it to a PC today using the USB port. The amp is just not showing up anywhere and the PC doesn't detect a new device either.

I've tried :

- Downloading the firmware update software (current version 1.44) to see if it would detect the amp (it did not)

- Using two different cables and two different PCs

- Restarting the amp and reconnecting the cable on both ends

Not sure what I'm doing wrong or what I should be doing next so help would be appreciated.

Hello!

I am using Marshall CODE as input/output audio interface with DAW software. I plug in headphones into Marshall CODE and It works fine, so I can hear sound from DAW. But at the same time I hear direct sound from CODE in my headphones.

I mean as a result I have double sound in my headphones: sound from DAW + direct sound from CODE.

Is it some way to turn off direct sound from CODE in headphones just to hear only sound from DAW (audio interface output)?

Hi Everyone,

I recently just got my Code 25 after many months of waiting for it to be back in stock. I'm loving it! There is so much to play with and so many different tones to explore.

I connected it to my phone and I love the feature of adjusting the settings with my phone. However, when I tried to download presets from the website, it won't let me.

I just wanted to ask, must the amp be plugged into a PC/Laptop in order to download the presets from the website or can this be done with just your phone?

The only reason I ask, is my laptop is very outdated and given that you can do everything on a tablet or phone these days, Iv'e never had the need to buy a new one.

Any help would be great as Iv'e some awesome looking presets I would love to try out.

Thanks.

I connected the CODE to my PC using USB but I cant do anything in the Reaper DAW. Tell me the settings pls

Does anybody know how to do this?

My brand new Code 50 is crashing after saving presets on amp. The firmware is the latest version 1.44. I applied the factory reset and the presets reset but neither were been helpful to fix this issue. After crashing, there is no output sound.

Is there away to turn off tuner mode? I do not use it and sometimes I go into it by accident. 

My new Code 50 Amp won't connect to my iPad. They are paired via Bluetooth, and Gateway detects the amp. When it tries to connect, it perpetually displays 'Connecting........'

What am I missing?

Would someone from Marshall Amplifiers truthfully indicte if they have officially abandoned support for the "Code" series of their amplifiers? With no firmware updates since July of 2019, it would appear that Marshall Amplifiers has abandoned their "Code" series of amplifiers and their customers who have purchased them. Please indicate if Marshall Amplifiers no longer supports these products so that myself and the others who purchased their "Code" amplifiers won't waste any further time or effort continuing to check for updates in that sorry-assed section of your website.

Thank you.

I've had my Code 25 since xmas without issue until a couple of weeks ago when a strange sort of crowd clapping sound started whenever I would use reverb and the delay sounds like an old 8-bit arcade game. This is across all presets and settings. Updated the firmware but no change.  Any suggestions?

I have just recently bought marshall code 25

I want to know what is the connection of the USB..

it is not a regular pendrive USB, mouse USB, Keyboard USB and etc,,,  i think its a difference connection on the amp

CONNECTION REJECTED 

You may only control amps you are already connected to

I am not able to use the product in a minimally satisfactory way due to the following problems and difficulties:

- It is not possible to change the order of patches saved in either the hardware or the mobile application. There is no way to back up the saved patch set;

- The foot controller only controls the patches of blocks 1, 2 and 3. I explain: the FS only handles A1, A2, A3, up to J1, J2 and J3, which totals only 30 patches out of the 100 available. It is not possible to handle patches numbers 4 to 10, 14 to 20, 24 to 30, 34 to 40, etc.

- The unit is crashing during patch editing directly on the hardware (I have videos with the evidence).

Marshall Team, we need your support to resolve this, please! Thanks!

My Code25 over the last few months, has started to suffer from the volume suddently dropping. It doesn't seem to matter what preset I am using, though the main culprits seem to be the Jubilee Gain with the classic 100w power amp setting and 1960 cab. When it occurs, I either have to come out of the preset, try different presets by pressing the various buttons on the PEDL91009, or by turning the amp off and on. This doesn't happen every time I use the amp, but enough to be an issue, especially when out gigging. I am on the latest firmware of 1.44

An example of the problem can clearly be heard on this recording of a recent practice session. It start at full volume, then just drops considerably.

?

Is this a known issue? Is there likely to be a future firmware update which may adress it?

Most times on my Code 50 when I save a preset I have to switch my amp off and then back on again because the sound stops coming out of it. I can't even scroll it through different presets at all. It's pretty annoying to deal with

I have a xiaomi redmi note 8 and also have a problem connecting the marshall gateway app to the amp code50.
I can only be connected as if I were listening to music, I even tried to connect it with an otg adapter, it works like that, but there are a lot of problems with braking the application? Please if it is possible to solve this problem.

 And if I tried all variants except one, and that is to uninstall every marshall application to amplify my Marshall Code 50 Firmware 1.4.4 recognize bluetooth connection from which I can control my installed Gateway 1.5.5 of course not just music to listen to But that I have complete control and whether maybe the problem is that the usb is included in my computer, whether to turn it off because I registered everything else. If anyone can answer all these questions I will be grateful.

Hello everyone, I own the Marshall CODE 100H and CODE 212 cabinet.I really love this amp, but I find the MY GATEWAY web page interface to be somewhat awkward to use. The following are issues that I would like to see changed.

1) On the My GATEWAY web page, the preset list at the top is arranged by columns (as it should be), but the MY LIBRARY list below that is arranged by rows.

?

2) There is no indication in the MY LIBRARY section on the MY GATEWAY tab whether a preset is or isn’t in the MY GATEWAY list.

Hello everyone, I wanted to tell you about my situation and if you can provide me with any advice or help. 

I have about 4 months ago my Marshall CODE 25 because I liked its characteristics and its comfortably to play in home.
but now I tried to connect it with my pc to use it as an interface and I couldn't, becouse it dosen't appaers in my daw.
When I put the usb cable, the guitar did not sound in the amp and I assumed that because the sound would go to my pc, 
but when I took it out, my guitar did not sound,it does not pick up my guitar. 
I tried his bluethooth function and my amp plays the sound of my phone.
Maybe conect the cable usb make some mistake in the software, i don't
now
I've tried turning it on and off several times and resetting the amp. Please I would appreciate
a lot if you could give me any helpful information as I tried my best to have it and i worked hard to have 
that amp.