I'm using a google pixel 2 and the app is not connecting with the amp although the phone IS already connected to the amp.

I've tried my wife's samsung s9 and it works ok. 

 Edit. Ok, Now It's working. But not only i had to forget the device, I had to do a Bluetooth, Wifi and Mobile reset. And after I reinstalled the app. 

The reset option is located in Settings>System>Advanced

So everyone else having the same problem and still not working after forgetting the amp on Bluetooth settings and reinstalling the app should try this instead.

Can't be more happy with the amp

I hope this can help anyone.

I have, or should I say, HAD a Marshall CODE 50 which after 20 months of service decided to quit following a POWER SUPPLY failure.  I took it to an electrical repairer for diagnosis and found out, through Marshall Australia and UK that the power supply is not replaceable because it has been suspended.  No parts available.  That means I now have an amp that is unfixable and never will be, even with an aftert-market power supply - which, according to Marshall cannot be retro-fitted.  What a fantastic waste of money that exercise was, and I have zero warranty fall-back.  Has anyone else had the same problem?  Kev

 4/1

Follow up: Tried contacting Marshall with email provided. Every time We prove we are not a robot, 3 of us verifying code, it says wrong code and blows us out? If anyone has info on a remedy, either replacing my Code 50 amp and or footswitch, or some pattern of buttons to hit to correct, I'd rest easy. 

Problem,

On any of the 30 presets I've programmed to footswitch and change to switch mode for effects,  the 1 button and 3 button turn on and off together. 2 works fine. It all worked great till a few days ago.  I see a advantage of programming 2 effects with one button...... But I want out of that.

Greetings, 

     Got everything working great........till assigned FX switch 1 or 3 turns on and off together. 2 is the only independent. Figured I must of hit something just wrong....... Searched, experimented. What did I do wrong? 

       Cheers,

              Scott

Hi!

Please help me, Marshall.

I can't connect Marshall Gateway version 1.4.9 running on my cell phone Moto Z Play with Android version 8.0.0 to my Marshall Code 25. The button "Scan for Amps" does not work. Even if I click "Auto-connect" option it does not work too.

I've tried all the solutions on https://my.marshall.com/support/faq/838/code---gateway-bluetooth-connection-troubleshooting without success.

The Bluetooth on my cell phone is on and Code is paired with Marshall Gateway.

Look at the screenshots.

Kindest regards,

Fábio

Hi Team Marshall,

My Code 100 combo has a constant mains hum wherever I have it plugged in, even without any guitar/lead plugged in.

Is there a fix or work-around for this as is very distracting when practicing etc?

Strangely, this doesn't come through when using headphones, but the volume is much lower when using them!

I do not have this issue with other amps or audio equipment plugged in!

Hey, Marshall! I connect my iPhone 8+ with my 100H without any problems. I’d like to dedicate a cheap tablet to it, in order to have a bigger screen and touch controls, and mount it to my mic stand. Does the Amazon Kindle Fire Tablet work with the gateway app? I know iOS and Android are compatible. What about Fire OS, or whatever it is that Amazon runs? Thanks for answers. 

Boss is in version 3 of it's Katana amps: 
https://www.boss.info/us/whats_new/press_releases/2018/BOSS-ANNOUNCES-VERSION-3-UPDATE-FOR-THE-KATANA-GUI/

Fender Mustang GT is in version 2:
https://www.fender.com/articles/gear/explore-the-new-amps-effects-and-features-in-the-updated-mustang-gt-2-0

Are there any plans to upgrade the Code to 2. 0 to include additional amps and effects?

I Have a Lin 6 / Yamaha variax guitar.

What the best setting when I use this electric guitar in the "Acoustic Guitar mode"?

Can I run my Marshall Code 100 Combo amp into the 2x12 Code Cabinate?

if yes, will I need to run it through a power amp to push more wattage to the cab?

Is there a way to turn this up or down in the amp itself? This would be a big help. I feel like the auxillary volume coming from my
computer or phone is always too low.

Hi,

I use de Plexi/Classic 100W for an Angus Young tone. When I crank up the volume above 1/3 I got a lot of feedback noise. It is like the sound of a mic that picks up its own sound from a speaker. Whatever I try do to, it won't go away.

I bought this amp with the CODE 412 Cabinet for stage performances, but it is unusable this way. Can you please help me to solve thsis problem?

Kind regards,

Paul

Can I use an Boss ME-80 multi eff pedal with the code 50?  If so, are their any problems to be aware of.

hi support

why do not you solve this problem???

my hardware:

Iphone X, iOS 12.1.4

Ipad Pro, iOS 12.1.4

Marshall Code 25, Firmware 1.4.1, date of purchase 12.03.2019

      My code 50 and my gateway app suddenly won't sync. What gives? I've tried deleating and downloading the app. Nothing works!!!!! It was working fine. Now suddenly,  it quit working......I'm beyond frustrated.....

My CODE 25 connects to my PC via both through MIDI in Chrome and through the Firmware Update Utility but it refuses to do anything but sit there while the gold loading circle just spins and spins. I've left it for upwards of 30 minutes. I'm unable to click on check for updates or anything. Tried rebooting a few times, tried turning blutooth off while doing it, etc. My amps current version according to both the amp and the app is v1.3. Any suggestion on what to try? Should I do some kind of factory reset to the amp and try again?  Any help or suggestions would be appreciated.

As a side note, I'm also unable to "download preset to amp" to test it out even though it's giving me the go ahead to do it on the preset site. I'm sure the issue is connected to being unable to update the firmware.

Thanks!

I'm brand new to the forum and I'm here because I have a problem. I bought my CODE 50 about a month ago -- love the amp by the way -- and it's been connected to my Android smart phone ever since I first set it up. I have the auto connect feature enabled so whenever I've been out of range, then moved back into range, it reconnects automatically.

Well, it's worked normally until this morning, when I noticed that nothing was happening when I was changing some settings using my phone. Come to discover the pairing had been lost. At first I started to retry pairing from the phone's menu, where it showed the CODE 50, but it didn't show it as being connected. When I put the amp in pairing mode, it had no effect in the app. 

So I exited the app and booted the pairing function in the phone. The phone paired with the amp quickly, showing the amp's code. But when I went back into the app, now it doesn't even show the amp anymore and when I hit the scan button down in the bottom left of the screen, the app just sits there and doesn't do anything. I've tried restarting the app, but that doesn't do any good. It just comes right back to the same screen as before. 

So, what now? I'm thinking about uninstalling and reinstalling the app, cuz I can't think of anything else that might work.

Hi, Marshall team!

Is it possible to add graphic or parametric (or both) EQ in the future firmware update?

High, first off, I am new to the modeling world, my main rig is peavey and Line6 DT25 tube rigs.

I bought a Code 50 as a quick and reliable solid state backup/practice amp to gig with if needed.

I love the sounds of it but at times the BASS just takes over even when Bass knob is rolled to

zero. no matter what settings i use the Bass is booming. I am thinking of a speaker upgrade

possibly but is there any advice on settings that may help me pull the mid range out more. I 

use Super Cleans and Gritty Gains. Hard Rock/Metal sounds

Wes

Hi

I have recently acquired a code 100H and cab and am learning how to use it to get the best from it. I have found i can never seem to get my solo playing to cut through and it needs a boost. I planned on using the FX loop with my boost pedal but i get no effect whatsoever. My leads are all good and the pedal works - i just cant seem to get any response from the FX loop. Can you please help?

Hi please refer to this previous question to help explain the background to my question:  https://my.marshall.com/forum/question/1479/marshall-code-100---should-it-have-come-with-a-2-way-foot-switch?filterType=recent&myActivity=True

Basically I bought a Marshall code 100 (no it's not 100H or 100C just a plain 100). It was out of its box and on display but discounted by about $180 because it had a slight dent in the base. The store rep claimed it had not been used. I bought it due to the price but after a few months I realised it should have come with a 2 button footswitch. I then raised this fact with the store and they agreed to supply me with the one that should have come with it. It has been about 6 months since they promised me they would replace and every time I ring up they come up with some bullshit excuse like "oh our suppliers on the other side of the country claim it is not sold as a spare and they have to order it in and they are not receiving any new stock of this item until Feb". 

So Feb has come and gone so I am about to ring them and vent my frustrations on them. Then I thought maybe I could get the PEDL 91009 foot switch instead of the PEDL-91010, at a discounted price (perhaps to the value of the cheaper switch that should have come with it), as I am told it is much better.  As I have never had or even used a foot switch and am completely clueless on them I have a few questions:

Does the basic PEDL-91010 footswitch only allow you to switch to the next preset up or down on the preset list of 100 presets? Or can you jump from like preset number 4 to preset number 98? If it only allows you to switch to the next one up or down does the 91009 model allow you to switch between any two presets on my list? Does the 91009 model allow you to program more than 2 presets to switch between when playing a song? 

Finally, one responder to my other post mentioned that the Code 100 only comes with a basic 2 way footswitch and that the PEDL 91010 is an optional extra. But this contradicts what others were saying (eg that it is the PEDL 91010 footswitch that it comes with).

Anyway I am confused and need all this cleared up so I am fully armed when I next call the store.