Hello, just purchased a Code 50 and so far I'm very happy with the amp but there are still a few things unclear with the Presets and Gateway. I have connection with my laptop or via android, that all works fine. I've downloaded a few presets from the website and want to use them on the amp. 

- The standard 100 presets are  there when I connect to the amp. If I want to add new presets do I have to override one of the standard presets? I thought 200 was the limit?
- And another thing,  if for example I upload a new preset to the amp the name of the preset doesn't show in the display. 

I tried the manual or Youtube tutorials but none are very clear on this subject. 

Hi all,

Just purchased a CODE 50 and am very pleased with the purchase, great modeling amp. However, I downloaded the Gateway app and any changes I am making on the my.marshall.com website do not seem to be syncing with the app. I added new presets from the user presets section but the change does not show up on my app (old preset I had is still there and not replaced). Also, now I have duplicates of several presets! No idea why. Every preset from 51 on is duplicated so now my list of presets is up to 148. What gives?? How do I correct these issues or are these known issues? 

I am using an iphone8 with iOS 12.1.4

Any help would be much appreciated and let me know if I am doing anything wrong. Thanks.

Jared

hello when i change patches on my code 50 , despite using the same pre amp and power amp im getting a delay on the patch change, approx 2 seconds untill the selected patch actually kicks in. is this down to the DSP chip recalling the set ups? also has anyone tried playing this code with cab sim off.  sounds quite good like my old TSL combo.  not bad at all .

Does anyone have a good Shadows Hank Marvin preset?  wishing to get that proper sound on Apache.

What are the steps to Backup my presets & patches on MyLibrary?

What are the steps to then load my presets to a friends Code 100?

I've owned the new Code 50 for only a few days so I'm still a novice navigating through all the features. I'm just getting into using the My Gateway app from my Iphone and noticed when I'm connected to the amp through Bluetooth and I have the "blue" presets showing on the app which are completely different than the presets I see on the amp when I'm not connected through the Gateway app. So for example when connected through bluetooth I see preset 00 as EL34 Heaven on both my phone and on my amp,  and when I'm not connected through bluetooth preset 00 is JTM Chill. I like the settings on the gateway app much better than what I have for presets when just using the amp without bluetooth. I guess what I'm trying to do is find the easiest way to say replace 00 JTM Chill with 00 EL34 Heaven so I can have 00 EL34 Heaven on the amp without having to connect using the gateway app? I've look at other questions and cant seem to find this answer. Is this the sync function?? Thanks in advance. 

I'm a rank beginner and I know this question is probably "beyond stupid." The issue: my Epiphone Les Paul has four knobs and a three-way switch, all of which gives me many sound options; and I have the CODE50, which has a huge array of presets using even more tone-affecting options than my Les Paul. If I want to get the best, clearest sense for each of the CODE50 presets in itself, apart from tweaking possible with all the options on the Les Paul, how should I set the knobs on the Les Paul?

Two of the knobs control the 2 pickups and allow choice between humbucking and split coil on each one. With these two knobs, turning to 0 is not an option because that would set the volume to 0 at the guitar. I'm thinking that for these two knobs I should turn them to volume 5 (middle of the road, average, "typical"), then try each CODE50 preset with the 3-way switch in the treble, rhythm, and both positions.

But what about the 2 tone knobs (one for treble, the other for rhythm)? Turn these knobs to 0 and possibly emsculate the signal in to the CODE50? Turn them to 10 and maybe force a heavy crunch or overdrive (?) onto the signal in, giving me a "distorted" impression of the CODE50 presets?

In other words, how would you recommend I dial in my Les Paul so that I can get the best sense for what each CODE50 preset does?

On the MyMarshall site, on the Presets page, I reorganized the default 100 presets to an order that makes more sense to me. I clicked the "Sync Now" button in the Gateway app and was pleased to see the new order displayed on the CODE50. However, when I toggle between AMP mode and Gateway mode using the icon in the lower left corner of the Gateway app, the order of Presets on the CODE50 also toggles back and forth between the original default order and the new order. How do I make my new order the default order on the CODE50, such that the new order will not change unless I do a factory reset?

Am I correct that clicking on the red "Reset Gateway Presets" button in the Gateway app would cause me to lose the new order created on the web page?

can i use a bass guitar with the code 50 and what is the best preset?

Twice now I have spent more than an hour reorganizing the default presets into preamp groupings, in the Chrome browser, clicking Save periodically with the checkbox checked to save a backup copy. Each time, Chrome or MyMarshall stopped accepting my clicks on the Save button in the lower right of the browser. Each time I seemed obliged to close the browser window and then navigate back to my presets. Each time I found all the presets reset either to their original order or at least to an order very different from the one I had created by the time Saves stopped being accepted. (I can't be more clear than this because I do not have the default preset order memorized.) Each time, I could not find any backup with my reorganized presets, so I have no idea what the backups are for or how to use them.

Is it possible to sort presets based on the preamp models and save them that way in the CODE50? Is dragging and dropping each preset, one at a time in the browser on the MyMarshall site, the only way to reorder the presets? What and where are the backups and how can we use them?

BTW, changing the preset position in the Gateway app is problematic. When I tried saving preset 15 as preset 1, I ended up with the same preset in positions 1 and 15. The original preset 1 was missing.

Hello, I got a code head and also the programable foot controller that I havent connected yet. My question is about the 30 programable presets. does this mean I can have total 130 presets or 70 factory presets and 30 custom presets.

Anyone know where there is a list of the 100 factory presets so I can enjoy my journey even more? haha

When I try to save a preset to the amp, there is no problem. When I try to save a preset to my library I get the message: Patch cannot be saved; sync with Marshall server in progress.  My gateway has both a Bluetooth and an internet connection. Logged into my.marshall but nothing happening. Sync button is disabled. I feel like I'm missing something in my understanding of this aspect of the Code/Gateway system. Is there a user manual for the Gateway app?

I was truly investigating these Marshall Code amps (the Code 100H really) a few months back until the point that I found your channel. It appeared no one had anything decent to state about the Code arrangement, so I essentially begun looking somewhere else. There was a decent arrangement on a fundamentally new Fender Mustang V v2.0 through a companion of a companion despite everything I didn't know about it until the point that the person consented to go to my band's stick space to give me a chance to take it for a true test drive. Purchased and paid for inside 30 min of playing and I couldn't be more joyful with it in the wake of downloading a portion of your presets. I've since played 3 gigs with it and Fender nailed it on the head. I can perceive any reason why Marshall chose to get into the displaying diversion (it likely has an entirely hot market versus genuine cylinder amps dependent on cost) however I really can't trust how seriously Fender spoiled the Mustang GT arrangement; they should have simply perceived the V2 Mustang arrangement and include bluetooth/USB cell phone bolster, an application to make things less demanding and a more extensive scope of impacts and they would've been cleaning house. At any rate, too bad for the indulgent remark; I needed to thank you for controlling me towards the Mustang. Your demo of the Code arrangement unquestionably sounds superior to anything the others I've heard, however I have no second thoughts as of watching this haha.

It sounds alright (despite the fact that the metal setting was terrible and I like metal!). I do have an inquiry. When you utilize the Bluetooth to change the settings, does it recollect it when you control it down or do you need to change it again every time you turn it on?

Andrew B. Lessard

I know I can override any CODE amp preset with CODE USB connections from the website or by changing on my phone while connected and saving either on the phone and/ or amp.  But How do direct amp changes work with Gateway while disconnected and then synced later on?

 In other words, if I save modifications on my amp to a particular preset and I am not connected to my gateway on my phone, when I do connect and sync later, which setting wins?  Does the phone setting override the amp-stored setting (ie. back out the mods made on the amp / push the settings to the amp from the phone) or does the phone pick up the modified amp setting from the amp and store it in Gateway (ie, pull the settings from the amp and store in my phone)?  

Also, I have the first 30 presets set up for ones I use to perform and are addressable using code programmable foot controller.   If I want to archive/backup those presets someplace to guard against an unplanned need to do a factory reset, does it make sense to store them perhaps in the cooresponding setting in my Library ( the blue section of My Gateway )  That way i can bring them into the amps and store them one at a time from the library back into the presets on the amp, or is there a better way to backup/restore presets in the event of a factory reset?

Thanks!

Hi,

I'm a fairly new user, and have not delved into the software on the Code 50 too much yet, but had a question about user presets.   Since there are 100 factory presets loaded, and it doesn't look like there's anywhere else to store additional presets, I'm guessing I'd have to delete or change factory presets to load any of my own.   I know there's 5 or 6 factory presets that I find unusable and don't mind changing those, but it would be nice to have 30 or 40 empty patch spaces so I could load my own sounds.

Is there updated software I can load onto the Code 50 to let me do this or am I stuck with having to change factory presets?

Thanks for any info

I've read the manual and apparently the volume knob controls the volume of whatever preset is selected.

I'm running a Marshall code 50 with boss gt1 pedalboard so my question is, if i want to my sound to be controlled via pedalboard shouldn't I be able to turn volume knob all the way down and only control the amps volume with master volume knob? Because the moment i turn the volume knob down i dont hear anything.

I'm just trying to get a more deeper sound, the sound i get is just way too bright

   I accidentally changed a preset and it's a preset that I used. Is there a way to get it back without resetting the whole amp?

I found the presets I didn't like, I then replaced those presets with ones I do like. I loaded presets that were for the same artist but they are scattered throughout the presets ranging from 0-99. How do I organize them on the CODE50 so they are in numerical order when I scroll through using the preset knob?

Thanks

I have an iPhone with google chrome installed but when I try to get a preset it says midi not available everything else on Bluetooth is working. Are you telling me I have to have a desk top instead of using my iPhone to directly get presets? So confusing!!