So, my CODE 25's speaker doesn't work. The rest of the electronics turn on and work fine. I know it's getting signal because the tuner works. No issues with the display.

But there's no sound either from the speaker or the headphone jack. So, the signal isn't getting anywhere other than into the input port and as far as the top circuit board, I assume.

I note in the picture below that I took that the red and black wires aren't connected to anything on the board to the right. There also appears to be two empty connections. I wonder if they need to go on there and if I can safely do so myself. Any help appreciated.

Also, yes, the transformer isn't secured to anything. I found two loose screws inside that I assume are meant to secure it to the side of the cabinet.

Hello. I bought a Marshall Code 50 two months ago used. The first days it was working perfectly, but now, whenever I want to play some guitar with the amp, it stops sounding out of nowhere. I assume it has something to do with the headphone out, assuming that the HP OUT cuts the signal of the speaker. Has this happened to anyone else out here. If so, how did you guys solve this issue?

PS: The firmware is updated ;)

Hi everyone!
im a Marshall code 50 owner.

i was trying to record my guitar via USB using GarageBand, but it was not possible.

I setup the input as Code in GarageBand but doesn't work.

any suggestions? or maybe Code doesnt work with GarageBand?
can you recomend any interface (not an expensive one) to record my guitar?

Hello everyone,

I was playing today and my amp stopped working and from then the screen switch on and off all the time and no showing anything. It is not working at all. Does anyone know what could I do? Any support place to ask?

Hi Marshalls

Is it possible to Connect my Code 100H to my computer or my audio interface without having a cabinett connected?

/Fredric

every company who sells digital amp made some upgrade with more amp or efx or cabinet or upgrade a better firmware with better tones. you do nothing! I've asked you - almost one year ago -, by mail, if marshall was programming an upgrade and in your mail you answered yes..I think was untrue, it's the worst support I've ever seen in digital amplification.

Hi guys just wondering if anyone has got a preset to play the above 

cant seem to get the right sound on my Code 50 

Cheers in advance

Hi,
owned a code 25 for a while now but only really started using it during lockdown but have to say I'm really impressed. I'm just using it for living room playing and connected to my DAW as a way of laying down ideas but seriously, it's REALLY good.

For context, I've played guitar for 27 years and working in live music has been my primary source of income (pre lockdown....) for around 17 years. I'm usually a live-sound engineer and tour manager and occasionally fill in the gaps with some guitar-teching. I'm uk-based but have international clients, mostly guitar-based, playing mostly academy sized venues but have done major festivals worldwide and one short stint of an arena tour. The point here is not to blow my whistle, simply to say I've spent a lot of time being exposed to all manner of amps and modelling.

I own a line 6 helix and while the CODE isn't as flexible with regards to I/O, I genuinely feel like it's amp-modelling, especially for crunch, fuzzy or blown out tones, blows the Helix out of the water. Not that I'm as likely to use metal tones or had much cause to tweak them but I've noticed those kind of presets can sound a little thin. Also, higher gain sounds in general could benefit from a graphic EQ somewhere in the modelling chain, as it can be prone to squeak at frequencies usually outside of a regular amps range, presumably because of the full-range nature of the cab.

So, my query is, is there any chance that the CODE range is likely to get any substantial firmware updates or maybe 2nd generation hardware that could bring additional functionality/Pro level durability and a decent footswitch... I'm impressed that you've managed to get that much functionality out of a mono-jack but a few extra switches or even just midi connectivity for use with after market footswitched to access would open the amp right up.

Personally, I'd love to see one capable of more complex I/O routing i.e. the ability to record your dry input to DAW over usb and similarly, route from the DAW to the amp input for re-amping.

Midi I/O and an xlr input with phantom and a decent sounding pre would make it a nice little hub for a solo recording setup.

Anyway, great work Marshall/Softube, really hope you develop the line further.

Quick 4 part question: A) can I use the USB to get a line level signal into my PC that my digital interface will push to my powered monitors?

                                                   B) when using USB is the cabinet speaker muted?

                                                   C) must my DAW be open to make this work?

                                                   D) in this USB mode, can the CODE 100 be operated without speakers connected?

Thanx!

Can I use an extension cabinet such as the MG412 being there is an extension cabinet output on my Code 100C combo amp?

Ok Marshall we bought your product thinking it would be a good product. With trusted support.  You have failed your customers and your products with no support for the code amps that your customers bought. And now most are stuck with a half working amp that they can't sell or not happy with.  When will you get off your butts and fix the amps with a firmware update? And support the product and the consumers?  Let us know so we can either stick it out or move on to another product.

Hi,

I just bought a Marshall Code 50, it is new but I think it have a problem.

When I move command buttons (Gain, Bass, Middle & Volume) nothing happend.

When I move Trebble button it change Trebble and Volume in the same time.

Also, I saw that settings change without touch buttons when I'm playing guitare.

Could you tell me what I have to do for fixing this issue please ?

I tried to reinstall the firmware but it didn't fixed the issue.

MCU 1.44

Having constant issues trying to connect iPad to Code25 via Bluetooth. Sometimes it works , sometimes it doesn't.No consistent behavior.  Yes I have made sure Code25 is latest version, yes I have updated IPad. Yes I have turned it off and on again (iPad and Code). I have not hit it with a hammer YET...Settings in Ipad says connected, Menu in Gateway App says not connected.  Do search in Menu > Code is found> tap Code ID and says its connecting , Just a whirling  wheel. Meanwhile IPad settings states connected. Extremely frustrated. Is there a solution to this or did I just get conned into buying something that doesn't do what it was sold to do. Help please............ 

I've recently purchased CODE 25, installed Marshall Gateway, and paired the code 25 with my smartphone (Xiaomi Redmi Note 8 Pro, MIUI 12, Android 10).

All was fine, I've listened to some pre-sets using the application and tried to disconnect the CODE 25 from the phone. I've opened the Bluetooth settings on my phone, tapped to the CODE 25 device, and pressed to the "unpair" option.

BUT the CODE 25 still tries to pair with my phone every time, when the Bluetooth is on.

I've tried to reset the CODE 25 to the Factory settings, tried to update the firmware - no result. 

Not even resetting the Bluetooth settings on my phone helped to solve the problem: the CODE 25 spams my phone with the requests of pairing every time I turn the device on.
When I pressing the Cancel button on the pairing request, the next request comes within several seconds.

It's really annoying!

How to force the CODE 25 to stop spamming my phone?

i asked these questions  last week and you didnt answer so he we go again...

what is the best setting on guitars volume to get the best sound from presets?,should we leave guitar settings on max and use master volume  on amp to control volume,as there are times when neighbours have to be considered, wont rolling off guitar volume just change sound effect?

I really don't like the speaker on the Code 25 combo and my plan is to build an extension cab with a 1 x 12" (potentially a Celestion G12M Greenback rated at 25 watts and 8 ohms). I am aware of the power / volume drop this will cause and I'm happy with it. The easy way to achieve this is to disconnect the wires from the speaker and wire them to an extension jack for use with the extension cab. But I wanted to know has anyone done this in such a way to keep the original speaker active when the extension isn't in use, but defeated when the extension cab jack is plugged in? That way the Code works as a combo still for home use, but I could keep the extension cab permanently at the rehearsal space. Thanks for any thoughts.

I have just got my new Code 25 so sorry for all the questions  ( despite watching all tutorials )im not quite  getting it , in  my library of presets , i just noticed that no.00 has changed names ,it was called something chill it has now changed to EL34 Heaven i didnt change it as i dont know how ,is this correct?

i have watched all the videos on this but still dont get it .

If i download one of the user presets  from My Marshall does it replace one of the 100 already there  ,or is there extra space that becomes available? and if saving to gateway does it have to replace one of those as when i open gateway library there are just 0-99 ,does this number keep going up?

is it possible to play code 25 amp naturally without having any presets on? if so please explain?

having never used amp with more than one volume what is purpose of volume dial and master volume,? and what volome should guitar default be when using presets , also is there a setting for playing a bit quieter without losing effect of the presets?