i noticed a strange ping in almost any preset.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
i did a firmware update and the ping gone.
i turned off my amp and turned on, and the ping was there.
and so on.
it's in the AMP section. when i turn off AMP the ping is gone but also the AMP that i was using.
Also i reseted the Code 50 to Factory conditions and the ping is gone, but when i turned off/on the ping is back.
What can i do to resolve this?
Hi.
I am using a CODE 50 and i am happy.
My experience is very good, of course this is not a HIGH END amp neither the real ones that CODE emulated, but for the price its an amazing amp, and for what i need, playing at HOME at lower volumes with quality and flexibility. Its a very nice solution to have in a very easy and cheap way some historical Marshall amps tones, and again this is not the REAL AMPS of course, but the quality and the price are very very GOOD.
I am using tradicional pedals running in front of the amp, due the absence of effects loops i am even running delay in front. The only effect that i am using from the CODE is the reverb.
Now comes one of the best thinks for me, i am using Marshall Footswitch, and i create 6 banks of presets for my taste :-) please see the photo. With this i can have imediatly diferent amps with the presets that i made, i event put some hang tags identifiyng the names of the presets.
To record i use 2 SM57, and my main guitar is fender 60 anniversary commemorative stratocaster.
I have sereval other amps, all valves, but again to play in home, record, jam, and so on, this setup is one of the best that i done.
Keep rock in a free world !!
Cheers.
Miguel
Hello.
I have 2 x Marshall CODE50's and a Marshall CODE25. I also have 1 x Marshall Footswitch (PEDL-91009). I run the 2 x Marshall CODE50's together (signal from guitar simply being split using a stereo delay pedal). Any ideas how I could control both of the CODE50's with 1 footswitch (just to scroll / change presets up / down on both amps at the same time without having to use two seperate footswitches as this is not practical live)???
Regards,
Dale.
i´m editing presets on code 25 using my android phone and save to my phone library
My quersions are:
How can I backup my Library?
and
How can restore this library or copy to my Android Tablet?
thanx
HOW CAN I DOWNLOAD PRESETS TO MY CODE 50
Hi, i am using a code 50, and i cannot store the vlume levels in presets.
I am using 3 diferent presets, but i cannot level the volumes, i think that CODE dont store that.
How can i solve this ?? Its very importan, otherwise its a complete mess....all the presets with diferente volume levels....
Please HELP ME !!!
Thanks
Hey guys, what would be the best set up for using a loop pedal with a code 50? Is it possible?
OR is there a way to start/stop recording with the looper preset via the footpedal?
Thanks in advance ;)
Presets need to flow easier between the different management areas.
(Reading the following is really only cumbersome, because that's how cumbersome it is to manage CODE.)
Copying one by one between amp and phone is really cumbersome.
How about an option to copy all 100 presets (or sections) between amp and phone? Both ways.
I want my amp to have the same presets as my phone.
(Others can still have the option the way it is laid out, but I don't see how managing amp and phone separately is useful unless someone really needs 200 different presets in one session.)
I like to have my preset sequenced in a way that makes sense. Artists, cleans, crunch, OD, Amps, or new additions squeezed next to existing ones. Others may sequence by set list or bands. If I shuffle presets on the computer/gateway, then the phone syncs this new sequence, and the amp does not match. Gets confusing.
Additionally, if the footswitch is assigned from the amp, then I have to copy new presets from phone to amp and even reassign to footswitch. Too many steps.
"Just use the presets on the phone and forget amp presets" would be an answer, but what about footswitch? and what about dead or forgotten phones?
Easy (automatic?) sync (with on/off for this auto/sync) between phone and amp, would allow everyone to use the amp (and footswitch) without constantly pulling out the phone and pairing to have presets from the phone available. Bluetooth drains batteries.
Btw, any phone sounds come on the speaker when playing because my iphone6 sees the amp as a headphone. So the presets need to be on the amp for any gigs.
Another footswitch suggestion:
A setting or function where the first 30 presets (01-30, without 00) are loaded into the 10 banks on the footswitch automatically? Then I only have to manage my presets within the 100 and everything else is assigned automatically?
Hi, Does anyone find out how to bypass all presets in code 50 and use as a normal amplier? i just wanted not to use the presets and use my analog pedals.
Thanks,
haven't even received my Code 50 yet and already doubting my decision the way the app is set up...
how do I add the downloaded presets to the app?
[EDIT: figured out how to manage the library]
why do I have to overwrite original presets to create my own?
[EDIT: seeing now how it adds a backup when I copy another preset on top]
would it be too hard to add more empty banks of 100 to the library?
[EDIT: finally figured out how to view and edit the library in 'My Gateway' tab on this site]
why can't I select only some of the presets I want to reset to original settings? It's all or nothing for resetting.
Will updating the firmware on a CODE 50 change/reset any presets?
Will it do anything to the sound of the CODE 50?
It seems it changes the sound of the CODE 50 any/some?
I just want to check with fellow CODE users if they are facing the same issues that I am dealing with.
Biggest (and most annoying) issue is, it's a matter of luck connecting the CODE through USB. 2 times out of 10 my pc recognizes the amp the first time I plug it in. Mostly it gives an error that device is not connected properly or not recognized by windows. So I end up unplugging and plugging again until (if ever) it's been recognized. (Using windows 8.1 btw) Then suddenly in the middle of a recording session my DAW starts to drag like if I am running on a PC Pentium 600. (It's running on a 3000$ alienware) This is a sign that somehow CODE get disconnected itself. Now you have only option left: Restart the PC and start all over again.
So far I have checked with different USB cables, and I am using the shortest ones as possible as I can. (less than 80 cm.) I can't check with another pc since I don't have another one, but I am running Yamaha THR-10 smoothly, without any problems at all!
So I don't believe that there's an issue with my pc. And speaking of THR, why the hell CODE doesn't have it's dedicated USB drivers. I am kind of sure that the issue I am facing is all about the ASIO drivers that we are left with as an only option.
Second issue is, maybe only 1 out of 20 times I am able to get any presets from web site. Even if it looks like CODE is connected in the Device Manager, and the Chrome (or Opera) says MIDI is connected, I can't send any presets to the amp. After a few tries, this ends up with web browsers got frozen and only option is again: restart your pc!
I really would like to hear from people who are facing similar issues and how they could get over with it. (if they ever could)
And hopefully the only answer I receive from Marshall team is not going to be: "Thanks for your feedback, we will pass this to our technical team"
Regards,
The whole process of downloading a preset, and allocating it to the amp (and saving it) and saving them to My gateway needs a complete re-work. The user interface is really bad, the methodology is not clearly explained and is next to impossible to do if you use a small android device with a small screen.
The library takes up too much screen space, there needs to be a condensed view without the useless pictures so users can manage thier library in a list mode (ideal for smaller devices). The library and my gateway needs to be side by side to drag and drop easier.
The UI on the app and website are really poor designs and could easily be improved with minimal effort. The designer only needs to actually use them to see how terrible the design is currently. Good amp being ruined by terrible UI (website and app).
The app needs to be able to store a preset library so I can keep 1000s of presets with me and download various banks of 99 anytime I need them. Having them on the website introduces a needless step.
My question is, any chance Marshall can sort this out before I go insane (its all a simple software fix away)?
Hi everyone,
I'm very new to the Code 50 amp. In fact, I only owned one amp before this, and had no effects pedals, so I'm very new to this sort of stuff.
I'm trying to work out the different effects and how they really sound, so my question is this: Do you have suggestions (maybe known songs or bands) that the different presets would sound like? For example (and this is not accurate, just an example), the Old School preset is similar to what was used in the verses of My Sharona.
Any suggestions from any of you?
Leigh
Hi All,
Just got this Amp and I not sure how to save a downloaded pre set. I can download but not sure how to save it. And I'm not sure what the Amp/phone icons are for in the lower left on the phone app. Can Somebody help a brother out???? Thanks you crazy animals !!!!!
Freinds,
In the past, occasionally, my Code50 would cause upper register tones to sound out of tune, quavering, in fact. If I reinstalled the firmware, the amp functioned properly. Now, no matter what setings or what guitar I use, the problem persists. I have reset the presets and reinstalled the firmware several times.
The amp has not been abused or subjected to inappropriate use. In home studio only.
What can you tell me?
Jim
I see many other presets available form other people that are NOT Marshall assigned presets. Most of these have a different name like a user name assigned by their creator. How on earth does one name their own or edited preset so it can be assigned to the CODE and into the footswitch. I specifically DO NOT want to save the edited preset under the original name like American OD or Plexi. I would like my own name like - Heavy Classic 1 and Heavy Classic 2 or 3.
Why are we still unable to edit the parameters of the presets we have uploaded? If for some reason we've altered them on our own amps and wish to update the ones that have already been uploaded and gained popularity, the latter would have to be deleted and the new, updated preset would be buried beneath the clutter.
Are we ever going to get more amp models, etc? The update cycle is pretty much nonexistent. That's not how it should be in this day and age. It's worse than Samsung, and that says a whole lot.
Is the Randy Rhaods prest on here to download ? Or can someone tell me were it is on here.
Thanks