I haven’t been able to find the answer to this via web search. Does anyone know if the effects loop in the 100h is buffered, or not?  Has anyone noticed dramatic tone loss if using 20’ send and return cables (40’ total)? Thanks!

hi 

i have looper 720 how can i contact with code 50?

I own a code 100h with the footswitch and I love this rig. I play through a 4x12 Celestion cab with gold standard vintage g12-75’s. It took a little bit of time to really become comfortable with the app and head interface, but it’s like riding a bike now. Thank you for this technology, Marshall, please don’t stop supporting us Kvlt CODE players!

Can I make a suggestion that you could profit from and would add to our Marshall experience and branding? Why not create virtual pedals and accessories that can be purchased and downloaded onto our CODE rigs?  

For example why not be able to purchase  “extra slots” and effects so we can run a wah and distortion pedal or run 2 delay pedals at once? I’m sure there are other itches that players could scratch this way? Maybe even add outside name brand pedals? You know, like that fluorescent green scream thing?  

Like I said, I love this rig, and it’s portability. If could ditch the separate wah and boost pedal I carry as part of my signal, I’d happily give you my money!

Is the a Marshall Forum for all types of Amps or just Code amps?   I need a user manual for a JVM 205H.   Where on Marshall's web page do  i go please?

thanks

I contacted this forum a month ago with my problem listed below.  I was asked to contact customer service desk email, which I did.  They have never contacted me back.  Another month has gone by with no amp due to a factory defect on a new piece of equipment.  The certified repair facility can not get the needed processor board from the factory.  This code 50 is the biggest waste of money I've made.  Here is the original post.

 contacted Marshall in the Fall of 2018. I have a code 50 that was having the volume change from low to very loud on its own, then it wanted to save the changes.  Not the master, the other volume. I could watch the numbers increase and decrease in its own. I was directed to take it to a shop called Uncle Albert's in Indianapolis since I'm about 45 min north and that was the closest. Their number is 317-845-3037. Once they tested it they told me the main processor board was bad and ordered one around Nov 20th. They checked in with me every two weeks telling me the boards were out of stock. Finally the week of Jan 7 2019. They called to say the boards were back in stock, but as of today 1-17-19 the shop has not received it although they did get a shipment from Marshall, my board was not in it. 

Hi I have a CODE 100 half stack (100H + 4x12 cab) AND a CODE 100 2x12 combo, which just arrived today.

I was expecting the two CODE amps to work together on USB, so I can get 2 guitar traces into my Mac in parallel. Unfortunately I'm disappointed to see that Mac will only see ONE CODE at a time. Looks like they both have the same device ID which creates issue on the bus?

Is this an actual bug? If so, please remove this limitation via firmware update because it would definitely make sense to have more than one CODE connected to the computer without needing additional hardware such a sound interface.

Please let me know asap thanks.

hi everyone , i got the marshall code 50 , i had a chance to get it connected to the laptop using win10 , after some days , it stopped getting recoginsed by the computer , is there anyone who could reach to a solution to this issue , it really makes you crazy , 

 i've tried with many other usb cables and changed ports 

thanks everyone

Hello, I got a code head and also the programable foot controller that I havent connected yet. My question is about the 30 programable presets. does this mean I can have total 130 presets or 70 factory presets and 30 custom presets.

Hello,

Reading the manual for the Code 50, it's not clear to me what the tap pattern setting is on the multi delay. What I am tryng to do is emulate having two delay pedals, essentially just repeating twice with no feedback. The effect should be two "echos" of a note and then nothing more. The multi delay seems to work, the manual says to set the Feedback level to the number of delay repeats (2). The Tap Pattern function seems to have no effect, though. How is that supposed to work?

Thank you.

i have a code 50 amp and i have a boss footcontroller Fc200. Is it possible to used this as the footcontroller instead of buying an new one? Already i have almost more pedals than there is room on the stage 😀

Can i use distortion and wah at the same time?

i'd like to buy the right headphone to use with my code50, do you know the exit impedence from the headphone output mini jack?

I bought the combo yesterday and it's full of bluetooth bugs - looking now at the FORUM my impression is that the support doesn't care about it.

- No automatic bluetooth connection - iPHONE - I am having always to force Iphone to "forget" the AMP and pairing it again... each time...

- MAC IOS , When I try to connect the bluetooth in my MAC, it makes the system crashes, mouse and keyboard stop working... there's no were to get the necessary code to bluetooth connection...

DO WE HAVE PLANS FOR A NEW FIRMWARE TO BE RELEASED SOON ? PLEASE

Toda vez que vou trocar de um pré-set para outro gera um atraso enorme.

O  tempo de troca é muito longo deixando muito a desejar para usa-lo somente os pré-set 

do amplificador. A última atualização para corrigir possíveis erros foi em 2017. 

Como posso corrigir esse tipo de atraso?

Hi, I am for the most part a beginner, I have dabbled through the years and decided to give it another go. Anyway I bought the code 25 I always wanted a Marshall but after about a week the amp makes a constant ticking noise? Any thoughts as to why?

Actually I'm totaly not interested in bluetooth connection, but of course I understand that it might be an essential prolem for some people...

But there are some other problems I'd like you to find good solution for.

1. Master volume. From 0 to 10% there is almost no sound, over 10% it becomes very loud. 

2. Decreasing sound level with Volume pot results in decreasing USB signal level - not acceptable for players using USB output for recording in DAW software. It would be nice if for clean preamp gain at 2 and volume at 3  give recording level about -6 dB, now it is about -36 dB... 

Best regards, Jacek.

P.S. What is a frequency range of CODE 25 speaker?

No automatic bluetooth connection after firmware update.

Please solve this problem.

Or support firmware rollback!

Question: I currently have a Code50 and want to jump to the code 100 head. I can't decide between the 2x12 and 4x12 cab. 

I've always had smaller combo amps and now want to jump  up to heads and cabs. What difference can i expect between the 50 combo and 100 head. 

Also, 2x12 or 4x12? 

I play mostly thrash metal, but will play blues and country from time to time. I'm looking for more bottom end, and more clarity. 

Also play mostly les pauls, but also have a Wylde Audio and ESP Iron Cross with EMG's. Will also mix in an acoustic/electric for some stuff. 

I have already asked twice about Bluetooth connectivity issues.

https://my.marshall.com/forum/question/1647/how-long-do-i-need-to-wait-for-code25-firmware-with-bluetooth-issue-solved?filterType=recent&myActivity=True

and 

https://my.marshall.com/forum/question/1308/there-is-a-problem-with-the-bluetooth-connection-since-the-firmware-update.?filterType=recent&myActivity=True

I've been asking questions for over 10 months already, and it's been a year since you released the firmware.
I am already anticipating your answers.
Do you plan to update the firmware?

This is really ridiculous. If you do not have any more updates, I hope you will be able to roll back to the previous version of firmware.
Previous versions did not have this problem at all.

My Code 50 was about six months old when the volume, not the master volume, would randomly change. I first noticed that the amp would either get really loud, or fade away to a whisper.  Only later did I notice the red “save” light would illuminate.

I took it in to a repair center for warranty work in November 2018, and here we are in mid January and it still isn’t fixed.  The problem was a bad main processor, ie. the motherboard. The repair center says they call Marshall weekly to order parts, and every time they ask if they have a board for my amp.  The repair shop is told every week that they don’t have any boards in stock.

What is the deal, I’m eight weeks without my amp. By the time I get it back, it will be out of warranty.  Can anyone help find a processor for the code 50.

Ed