Hello everyone!
I have a CODE100H + CODE412.
I love this amp, but I have some problems with the distortion pedal (MAXON SD9): when I turn on the pedal I hear a very high-pitched rustle (With the old amplifier the distorted sound was better). The pre-amp in the Code is JCM800 ("clean" and without any effect) ... does the same thing happen to someone?

I was having difficulty syncing my gateway app to my Marshall.com to add downloaded presets to my library. On the forums Marshal suggested doing a factory reset by holding the amp button down while restarting the amp. 
I did that. Now when I try to Bluetooth connect the gateway app and the amp I get this an error that says "connection rejected. You may only control amps you are already connected to for audio output". 
I have restarted the amp and phone but I keep getting the same error message. 

please advise on both this current problem as well as how to sync my gateway so that the downloaded presets get added to my gateway library. 

I would like to know if someone is using code 25 for small performances with a band. Using i.e the headphone as line out to a mixer.

How are the four Celestion G12M-25 (25W, 16Ω) speakers wired ― series or parallel ― inside the 1960AX and 1960BX extension speaker cabinets?

Hi,

I have a Nokia 6.1 running latest Android 9. Downloaded and installed app on sd card and it does not even start up, just a black screen.

Is the app not compatible with this phone and anroid version?

How are the four custom speakers (8Ω, 50W) wired ― series or parallel ― inside the CODE™ CODE412 extension speaker cabinet?

Please fix this, Marshall!

The only way to listen music on Woburn is via cableless connection. You cant plug your TV or DVD player in it, as it has a huge delay. 

I've spoke with someone of Marshall team, and I was adviced that, this product is not ment to be used with TVs, Piano, Guitar or any other devices. So, how many speakers I need to own in my house? One for music, a soundbar for TV, amp for my guitar?

I would giveup multi-room feature if AUX and/or RCA had no latency!

If I did know there would be latency over AUX and RCA I would never buy this expencive speacker! Bose Soundlink had the same issue, but they DID FIX it with with an firmware update. Why Marshall didn't fix it yet?
So Please dear Marshall team! If you read this, please! Fix the latency over RCA or / and AUX so I can love my speaker again.

Could someone please tell me the exact manufacture date and manufacture location of my Marshall Amplifier?
The serial number of my White 20th Anniversary Series, JCM 800 / 4104 50-watt combo is:
AS 00980

 Thanks for any and all assistance.

I am trying to do a factory reset, and instead of the "completed" message I get a "cancelled" message when holding down the store/exit button. The system them reverts to the existing pre-reset state.  Can anyone suggest how I can resolve this?

Hello,

Does anybody have a clue when this Footswitch will be available in Australia??

If you don't know or the answer is NEVER, does any have an idea of another footswitch that will do the same job on my DSL40?

Thanks

How are the two custom speakers (4Ω, 50W) wired ― series or parallel ― inside the CODE™ CODE212 extension speaker cabinet?

I'm thinking to buy an amplifier wich is relatively low cost, and the vs100H seems to be a good candidate.

Since I'm looking for the possibility of having a 3 way pedal switch:  clean, rhythm and lead, and the vs100 has 3 channels, I was asking myself if it auctually supports a 3 way led pedal like the MRMPM3E, or the MR-PEDL00021??

Any help would be appreciated :).

Any suggest of another low budget but good sounding amplifier would be appreciated too!

Hello, my marhsall jcm 2000 is low volume, I already changed all the valves, adjusted the bias and it continues with the low volume in the 3 channels. Can someone help me?

Thanks. Aroldo.

Je viens de recevoir le Marshall CODE 25 et j'ai essyé de l'utiliser directement.

Plusieurs critiques :

- Aucun manuel papier

- Pourquoi utuliser un Mini USB Type B (souvent utilisé pour les caméras, les appareils photos ou les manettes de console de jeux) quasi plus utilisé, et surtout pas fourni ?
Pourquoi pas un Micro USB Type B (répendu partout) ou usb normal, voir usb type C dans ce cas là c'est le futur ...

-Les vidéos tuto sur le site ne sont pas assez complètes.
Par exemple le playback ... Je n'y arrive pas.
-
C'est dommage de devoir remplacer des resets d'usine pour mettre celles que l'on créé, ou alors il y aurait fallut un autre moyen sans passer via PC ou Smartphone... Il y aurait dû avoir quelques pistes prévues, ou un port usb, micro usb pour mettre une carte mémoire.
-
Pareil pour le pédalier pas de manuel papier, un peu chaud à comprendre au début sans explications.

J'éspère que vous pourrez me renseigner.

Pour n'y a t'il pas une notice, un manuel, papier ( voir un PDF via internet) qui explique tout le fonctionnement les mamip' comment utiliser toutes les commandes de cet ampli, simplement.
Et pourquoi ce port USB ??? et aucun OUTPUT ...

Hello, admin, why you delete my posts? I bought an expensive amplifier that is noisy and I need a solution to my problem.

I can not send the amplifier back due to the rules of the customs of Russia. It turns out too expensive.
I ask technical support to help me solve the noise problem in the new amplifier. You are, after all, Marshall, not  Noname Firm.

Looking to confirm, when using headphones on 5 Watt, you disconnect the speaker correct?  Also, does this need to be in low power only or can it be in normal power for headphone use?

for an amp company that makes amazing amps that sound even more amzing with a cranked out fuzz in front of them, im suprised to find that the marshall code (i have a 50) does NOT have any type of fuzz!! this may be there are hundreds of different fuzzes and each one has a different sound, but they could at least have a generic fuzz, like a big muff clone, or mxr blue box. so marshall, PLEASE add a fuzz, an octave fuzz, and for us jack white fans, a microamp boosted fuzz!! or any code users have any presets for these effects??

I bought Marshall Major 3  BT Headphones on 26th October. I want to register the product. Please guide me.

I recently bought a JCM 800 Studio Classic SC20H. I have taken in to practise twice and inbetween nba reddit songs when i pcpartpicker am not playing a loud crackaling comes out of the speakers (I have changed all cabels, speaker cable guitar cable power cable) and it still happends. but  if i play for a while it seems to disapear then randomly come back when i stop. if i put the amp into standby it goes. reverse phone lookup

 anybody have any ideas?

cheers 

Hi guys, im new to head and cabs as i have been a combo guy for years. I recently purchased a code 100 Head easybib and i really do not want to use the code cabinet and want to get a better upgrade. I have a guy selling a 2004 1960A cab for $500 AUD irs.gov OR I was thinking of getting either a 4x12 origin cab or a 4x12 SC cab. 

any ideas ?  fedloan

 thanks :)