The connection via bluetooth and the  Androidphone will work. The amp and the phone ist pared but the gateway app doesn´t recognise the amp. What is wrong? Are i am stupid or what the f***** is the reason? I updated the firmware of the amp... Please help me or give me detailed advices!

Hi folks,

Reently got myself a CODE25, however I couldn't manage to get it connected to my phone. I assume its due to faulty bluetooth module, because when I turned on the amp, bluetooth version field is missing on the screen. The amp also did not show up on my phone although bluetooth pairing mode was activated.

I did follow the troubleshooter but it didn't help.

Updated to the latest firmware (1.46)

Anyone experiencing the same? Any suggestion how to fix this?

I turned on bluetooth on my  phone then initiated the bluetooth feature on my code100. find the amp in the It found the amp on my phone so I connected to it and the blue light on the amp quit flashing indicating that they are synced together. When I open the gateway app on my android phone (samsung S20E) it will not find the amp in the menu section of the app. I see the blue tooth symbol there with the word CODE next to it and it says not connected. There is nothing next to the Amps Detected: and when I scan for an amp it turns gray for a few seconds and then back to green. Same thing when i switch between the phone and amp icon in the bottom left corner. when on the phone icon i have presets when I switch to the amp Icon I get nothing displayed. I do have audio .from phone to amp and that s what it says in the blue tooth section in my phone. It says that the code V020150FDU connected for audio

I just dumped a half can of Red Bull onto the panel of my code50. Now no sound come out. It powers in fine, all the dials and buttons seem to work, just no sound comes out. It connects to my phone via Bluetooth but no sound comes out when I try to play music from that either. Any advice would be welcome. I'm not sure how to go about troubleshooting it. 

This issue is driving me crazy. My Code 50 used to work with my iphone and ipad, now it refuses to connect and I always get the above message.

I have performed the following:

1. Forgot bluetooth connection on both devices

2. Deleted iphone app and re-installed.

3. Re-paired and tried to connect with same issues,

4. Formed factor preset of amp with no luck.

I know the blueotth connects as I can play music through my amp from phone, I just cannot connect to update any presets.

Any solutions would be greatfully received, am getting so frustrated with this product.

I recently got a new iPadPro.  I can Bluetooth to my Code25, but when I open the MyMarshall app I get the following:  "Context 3D not available!  Possible reasons:  wrong renderMode or missing device support."  What does that mean and how do I get the app to open?  I deleted the app and reinstalled and have powered the 25 down and restarted.

Hi guys,

i have a marshall code 25 and i have a problem when i link my phone via bluetooth and via jack to have a backing track while i'm playing guitar.

via bluetooth the sound is like in a shell, is not clear and brilliant, but like closed, sorry i can't explain well. Like the treble very low, and the middle and bass high

via jack in the ipod input i need to raise the master volume to the top to hear something but is very low.

A friend has a marshall 15watt without bluetooth but with the ipod input. When i link the phone there, the sound is not affected by the master volume but only by the phone. And the sound is good like directly from the phone. The pots on the amp changes only the sound from guitar like normal use.

What can i do? Could you help me?

Thanks!

Hi ! So I'm wondering if there are other charging options for a Marshall Killburn 2? I had a Killburn (1)before but it was i big hassle charging the speaker through my 12v output with a transformer/converter since the only cable seems to be a figure 8 cable? 

Does anyone have other options? Is there any way to use figure 8 cable on a 12v output? Without using a transformer ? Don't have the possibility to charge through a regular socket at work so. 

Thanks for replies !

Hello,

Can anyone advise where can I find spear parts for Marshall Stockwell?

My Marshall Stockwell Portable Bluetooth Speaker accidentally fell from a height and broke the volume controller with the knob.

Please see attached pictures

I seem to be having the same issues that a lot of people have reported, where I cannot get the Marshall Gateway app to connect to my Code 25. I've only had the amp for about a week and I cannot get the app to see it. ? 

I can connect to the amp via Bluetooth using my phone (Samsung S10, Android 11) and whilst connected, can use it as a BT speaker to play music from Spotify. However, nothing I do seems to get the app to connect to the amplifier. 

-I've updated the amp to the latest firmware using my laptop/web browser. 
-I've followed all the instructions in the Bluetooth Connectivity Troubleshooter to the letter (CODE - Gateway Bluetooth Connection Troubleshooting - my.marshall.com)

No matter what I do, or what order I install/uninstall/connect, the app will not see the amplifier. Everything works otherwise - I'm able to apply Patches from ? using a USB connection - and the amp sounds great. I'd just like to be able to control it from my phone.

Is there any alternative to the Marshall Bluetooth App for the Acton / Stanmore II / Woburn Series?

Specifically is there another way to link up two speakers to a stereo pair? Maybe a desktop client or maybe even a command line tool?
Or is anyone aware of an e.g. an open source project that reverse engineered the protocol? I can't be the only one out there finding the app horribly unintuitive and poorly programmed, also some functions simply do not work - e.g. source selection for a coupled pair.

Thx...

I just bought the code 25, and only had it for a few days.  It was great on my iPad for effects via bluetooth, although after  I updated the firware it wont connect to thre app on my ipad anymore, it plays songs from my itunes app but the Gateway app says Im already connected and nothing works to adjust the affects. Im really bummed about this, any word on why this is happening and how to fix it?. 

Hi, 

I've just recently bought the Acton II to have as a speaker in our bathroom. Looks great and sound good enough. So far I'm satisfied. 
However, the speaker is driving me mad. Here's why. 
My girlfriend and I both use the speaker whenever we're spending time in the bathroom, so both our phones have been connected to the speaker at some point. 
But, if I'm playing music from my iPhone to the speaker and my girlfriend is in another room, let's say, watching YouTube on her iPhone things get wierd. If she adjusts the volume on here phone it also messes with my music in the bathroom. 

Another example:

Playing music from phone 1 to Acton II. then, Adjusting the volume by using the buttons on the side of iPhone 1 also adjusts the main volume of phone 2. Even though Phone 2 isn't in use. It just messes with the volume of it. 

This is suuuuuper annoying. Since the app is no where near of being good, I don't know how this can be solved. If there's no good solution I'm gonna have to sell the speaker and buy a brand that really knows how to make speakers for this purpose. 

Does anyone know if this can be fixed..??

thanks / Mathias 

Hello -  After really enjoying the Kilburn II speaker, I bought two Acton II speakers to couple them for ambiant sound when not using traditional speakers since you can't couple Marshall's wireless speakers. The Acton II is fantastic for sound and range individually *before* my attempt to couple them. I've had many complex compatibility issues with products over the years, but in this case, it's most puzzling why two same-model "coupled" speakers can be controlled via the iPhone/iPad I paired with them, as well as with the Marshall app (volume/sound settings) but cannot in any shape or form maintain simultaneous outputs even when they're placed right next to each other (well within the 10-meter Marshall spec). So before returning them back to store, I wanted to check with other customers if they've ever truly achieved the goal of coupling two Acton II's with both of them continuously and consistently playing in tandem without streaming drops. Thank you for letting me know,

What I've tried to so far:

- Followed Marshall's pairing/coupling intructions word-by-word. Though their instructions are incomplete and way below their reputation. 

What's more disappointing is the prompt you get in the app to "stay connected to Acton II but disconnected from Acton II in Bluetooth settings." Anyone know what that means? 

- Tried two iPhones and an iPad (all latest iOS).

- Deleted, rebooted, and re-installed the Marshall Bluetooth app (v1.3.1) for iOS.

- Moved the speakers next to each other to eliminate distance argument.

- Tested each speaker with direct Bluetooth to iPhone/iPad source without any issues. In fact, range is so much more when not using the Marshall app to stream to the speaker.

- Factory-reset the speakers.

- End result: The only way I was able to have them coupled was ignore their instructions, couple the speakers and then completlely shut down their app. after they show as coupled . However, there's no way for them to continuously and play in tandem (even sitting right next to each other with source iPhone/iPad next to them). They continue to switch between each other. 

- Also, Marshall needs to be clear that a "couple" can only function with one lifetime source. As soon as you try to use the speaker "couple" on another source device, you lose everything on the previous device and need to de-couple, forget speakers, re-add speakers to your device's Bluetooth, and then pray that the Marshall app will allow you to couple them again. Most of the 18-20 times I tried the whole process, I needed to uninstall their app, reboot device, and re-install their app. :(

Any help deeply appreciated before I return these speakers.

Hi,
I tried to connect Marshall Gateway App to Code 25. (Firmware v1.46)
While Bluetooth connection between mobile and Code25 basically is set up and I can even stream music to it,  the app says "You may only control amps you are already connected to for audio output".

I cannot connect the app to the amp.

Maybe anybody can give me a hint.

Cheers,

Martin

There are multiple phones that use the Emberton speaker in our house. When one phone is playing music through the speaker using Spotify and another person enters the room with their phone, the speaker will always switch to their phone. It could be anything such as a video from social media. It pauses whatever the first connected phone was playing, and interrupts any music playing. 

We also have an Acton speaker and have had no issues over the years. At first I thought it was a fault with the Emberton and have had it replaced under warranty. However, the new speaker is doing the exact same thing. 

Anyone else experiencing this and (hopefully) have a solution?

Hello,

i have my marshall minor 3 since 2 month and they where working perfectly but since friday i can't see the earplug on my bluetooth device list but i can see the case can any one help me please ?

thanks in advance

My phone is a Galaxy A50

Hi

I have a code 25. I just bought a new laptop. it had windows 10 but decided it wanted windows 11 so updated it, now my code 25 is paired but if I connect it. It says connected for a few seconds and then goes back to connect. So I can listen to my online lessons through my headphones. Anyone else experience something similar.

Thanks

hy

marshall gateway app is not working with android 11 version

the bluetooth connection is in place (blue light is in on) but opening the Gateway App the connection to the amp is not detected

can you please give me the info to solve the issue?

i've tried with another phone with android 10 sw version and the app is working

I think the app need some update to fix this bug (my version is 1.5.5 )

please consider that android 11 will be the standard for the most part of your code owner in the world

best regards 

Luigi