Forum Questions - my.marshall.com

Bluetooth

When you activate bluetooth on the amp the code number that is displayed, must it be entered somewhere. I have your app loaded down on a smartab. I press "scan for amps" and nothing...all the time no connection...would appreciate some feedback...thanks

asked 08 Feb 2018 at 07:20 PM

4 cable with gt6 from boss

can i make a fourcable connection with my boss GT6 if so how do i do that?

Boss gt6

asked 08 Feb 2018 at 06:32 PM

Marshall Code 25 - Headphones problem

I just recently purchased a Marshall Code 25 and when i tried to use headphones(all 3 of them, of extremely good quality and every day use) the sound is terrible.

What might be the problem, and are any of the marshall headphones good for that amp? Does the Code need some kind of specific headphones?

CODE Headphones

asked 08 Feb 2018 at 06:23 PM

Code50 versus boss footcontroller

con i use the boss fc200 as a footswitch with the code50 amp. Im having a midi connector set to the plug where it is to be connected.

if so what standard midi presets do i need in order to be able to switch form setting 02 to e.g. 53

Presets Footswitch MIDI

asked 08 Feb 2018 at 06:22 PM

Marshall Code 100 combo amp cover needed

Looking for a cover (item# COVR00133) for my Marshall Code 100 combo amp. No one stocks them state side.

CODE CODE100 ampcover

asked 08 Feb 2018 at 05:16 PM

Just acquired a DSL40C.....where can I buy a cover for it?

ampcover

asked 08 Feb 2018 at 04:38 PM

Code 50 lcd just blinking

Firmware is up to date, turned amp on and the the lcd just blinks. Tried doing a reset ( power off, hold amp button down etc) but no change. Any ideas ?

CODE Firmware

asked 08 Feb 2018 at 02:50 AM

Registration

Hello,

Isn't it possible to register my code amp outside of the UK.

I have send an email with the info, but no response.

Greetings

CODE Registration

asked 07 Feb 2018 at 03:56 PM

No voice coming when Stanmore in bluetooth mode

I am facing the problem where when I select the bluetooth mode of my stanmore speaker the song plays but no sound comes out from the speaker. While its works perfectly with AUX cable.

kindly suggest , what I should do !! I am based in India (Delhi)

Thanks,

Ishan

Bluetooth Speaker Stanmore

asked 07 Feb 2018 at 09:06 AM

Update firmware

I have just downloaded new firmware to my code 50. I dont see anychange. Can i listen to new settings before factory reset! And can i delete any of the factory presets from 00 to 99 and it will be replaced by 1 of the new presets.! Or are the first 13 deleted and replaced by new. Hope that makes sense. Thanks in advance

CODE Presets Firmware

asked 05 Feb 2018 at 09:30 PM

DSL5CR power tube

Hi,

Have just replaced my DSL5c with new version and i see valve layout has changed. Can i replace the ecc99 with a TAD12bh7a which I still have? Apparently depending on circuit or amp design this can be possible.

Also why the reduction to 2 ecc83's? Your site and Sweetwater both list this new model as having 3 ecc83's! Is my new amp wrong? Is the phase inverter missing?

Thanks

Mike

Tubes DSL5CR

asked 04 Feb 2018 at 10:22 PM

Latest Softwear code 50

Hi

How can i tell if my code 50 amp has latest softwear!

CODE update HARDWEAR SOFTWEAR

edited 04 Feb 2018 at 10:06 PM

asked 04 Feb 2018 at 09:47 PM

Woburn - blown fuse

hello,

i’d Like to know which fuse is the proper one to replace on my Woburn speaker?

and by the way, what can cause this problem...?

(can it be affected by near electrical products or a bad/defective wall socket?)

thanks:)

Ronen

Speaker fuse Woburn blow

asked 03 Feb 2018 at 11:07 PM

presets via bluetooth

is there a way of sending the presets from phone to amp without cable?

thx

Bluetooth Presets

asked 03 Feb 2018 at 10:21 PM

JCM 2000 DSL 50 Manual / JCM 900

I have a couple legacy amps. A JCM 900, and a JCM 2000 DSL 50. Somewhat surprised to not be able to find some PDF files of the manuals on the marshall website. Am I missing them ? A "discontinued" section ?

Thanks!

Manual DSL

asked 03 Feb 2018 at 08:18 PM

JVM 410HJS

I purchased a Marshall JVM410HJS (Joe Satriani) amp which came with a MODEL: PEDL-91005 foot switch. This same foot switch is listed on the Marshall website (https://www.marshall.com/marshall-amps/products/amps/jvm/jvm410hjs) as included accessories. However, the Manual states that the correct foot switch for this amp is “MODEL: PEDL-00055” and that NO OTHER foot switch should be used with this amp. Did I receive the wrong foot switch with my amp or will the PEDL-91005 function the same? Please advise!

Manual

asked 02 Feb 2018 at 11:12 PM

Systematic Hiss/Scratch when recording through Code 25

I am trying to record using my Code 25 amp.

When I record, i get a strong scratchy, hissy noise that happens regularly for 5 seconds every 15 seconds.

I've swapped cables, guitars, computers, etc. and still get the hiss. I swapped amps with an older Vox modular amp and the recording is fine. So it almost certainly a problem with the Code 25. Of course I bought the Marshall amp to replace the Vox because I don't like the Vox's sound, so just using the Vox is not an option.

Any suggestions? What could cause the interference I described through the Code 25?

(BTW, I'm recording with very high quality USB/guitar cables, a JP Majesty guitar, and audacity.)

CODE

asked 02 Feb 2018 at 05:05 PM

Marshall code 50 cuts out.

Why does my code 50 amp cut out? Also, has loud crackeling sound when it's working. Sounds like a blown speaker but it's not. The master volume is only turned up 1/4 of the way and it's loud. Problems still remains even at lower volume. slight delay on the footswitch also when changing from one preset to another. Frustrated in Detroit.

CODE Presets Speaker Footswitch

asked 02 Feb 2018 at 04:55 PM

PC connection

I have been trying to connect to my PC for hours now. I have the latest version of chrome. And allowed the midi. Also I did the windows RT. still no connection Any help would be greatly appreciated

MIDI

asked 02 Feb 2018 at 04:33 AM

What do I do when I get the "Code: Not Connected" message?

I have the My Marshall app paired with my CODE amp. I have my mobile device (Samsung tabket) connected to the amp via a Micro USB cable but still receive the not connected message. I can't download any user presets.

CODE Presets USB

0

1

1k

asked 08 Feb 2018 at 07:20 PM

0

4

1.1k

asked 08 Feb 2018 at 06:32 PM

0

1

4.2k

asked 08 Feb 2018 at 06:23 PM

0

0

1.1k

asked 08 Feb 2018 at 06:22 PM

0

1

1.4k

asked 08 Feb 2018 at 05:16 PM

0

0

716

asked 08 Feb 2018 at 04:38 PM

0

1

1.5k

asked 08 Feb 2018 at 02:50 AM

0

2

1.2k

asked 07 Feb 2018 at 03:56 PM

0

1

1.4k

asked 07 Feb 2018 at 09:06 AM

0

1

1.4k

asked 05 Feb 2018 at 09:30 PM

0

0

1.7k

asked 04 Feb 2018 at 10:22 PM

0

1

1.2k

edited 04 Feb 2018 at 10:06 PM

asked 04 Feb 2018 at 09:47 PM

0

3

4.5k

asked 03 Feb 2018 at 11:07 PM

0

1

1k

asked 03 Feb 2018 at 10:21 PM

0

1

2.2k

asked 03 Feb 2018 at 08:18 PM

0

1

1.5k

asked 02 Feb 2018 at 11:12 PM

0

2

808

asked 02 Feb 2018 at 05:05 PM

1

0

2.4k

asked 02 Feb 2018 at 04:55 PM

1

1

1.3k

asked 02 Feb 2018 at 04:33 AM

0

1

1.1k