Questions
Showing results 1261 to 1280 of 3921
0

votes

1

answer

1.1k

views

Hi, 

I was wondering if I could plug in a two notes torpedo cab m into the 8 ohm speaker out jack of my Marshall Origin 20c without plugging it into the speaker as well?  Would I need to put a dummy plug into the DI out to activate the built in load dummy load? Would the dummy load work without the dummy plug in the DI out? Can I even use the 8 ohm speaker out jack without a load on whatever I have plugged into it even with the DI out plugged into something?  The two notes cab m does not have a dummy load built in and on normal amps would have to be plugged back into a speaker or a load box for the load and sound would still come out of the speaker.I'm wanting to use the two notes cab m so I can tweek cab imulations, record and use headphones all while still using my amp without disturbing anyone. I know I could just use the DI out, but I've read it alresady has cob imulation on it and I would like to tweek my own.

asked 12 Sep 2020 at 07:55 PM

CHARLES KAECHELE
1

vote

1

answer

1.9k

views

Hello,

I am a recent ower of a Marshall Origin 20, which I got in July. I've really enjoyed the amp until I plugged in last night and got out absolutely no sound out of it. I couldn't figure out why, as nothing as happened to it and it worked fine two days ago. I took it apart to do some trouble shooting and found that when I have all the knobs max'd and output on 20 watts, I can hear a whisper of my guitar signal (nicely saturated, presumably by the preamp tubes) through the speaker. This sound is affected by all of the knobs. However, if I plug my guitar directly into the return of the effects loop, and activate the effects loop I get no sound whatsoever; no guitar, no hum, nothing. Because of this, I'm sure my speaker is not the problem. These things led me to think it was a power amp section issue, so I went down and purchased a new set of matched EL34's, threw them in there, and nothing changed. I'd really like to know if there's anything I can do to fix this, because this amp is not even a year old and I should not be having these kinds of problems with completely normal bedroom use.

 

Thanks,

Alex

asked 12 Sep 2020 at 06:27 PM

Alex Peters (1)
0

votes

8

answers

828

views

Hi There, My AS100D Channel 2 was working now is not working.

XLR Mic plug or Instrument mono jack.

asked 10 Sep 2020 at 05:25 AM

Jarrod Caston
0

votes

1

answer

691

views

I am looking for a more low ended sound than the provided 12 inch speaker cone and would like to try a 15 inch speaker cone. is it possible to do this with minimal or no modifications to the build of the amp?

asked 09 Sep 2020 at 07:48 PM

Tyler Friedman
0

votes

0

answers

564

views

Does anyone have a preset that is close to CC Deville of Poison?

 

Thanks

asked 09 Sep 2020 at 02:34 AM

Jeff Scranton
0

votes

2

answers

903

views

I'm attempting to discover a channel exchanging pedal for my DSL 100h. The Marshall site says it utilizes the PEDL-90012 which is out of creation. Can I simply utilize something like the MRPEDL91003 or do I have to get the first footswitch? tellthebell

edited 15 Sep 2020 at 06:29 AM

Flemi Jackson

asked 08 Sep 2020 at 10:37 AM

Flemi Jackson
0

votes

1

answer

823

views

I have a DSL 100h that has been fading in and out and crackling for quite some time. It seems to only happen on the clean channel and makes no difference, if I have my pedal board plugged in or not. I have the fx loop turned off, so I believe that that part of the circuit is out of the equation. I just swapped out the tubes because I suspected the pre amp tubes were bad from some other things I read and still no luck. Has anyone else experienced this?

asked 06 Sep 2020 at 05:43 PM

Nicholas Austin
1

vote

1

answer

1.1k

views

Hi all. I have a Code 25 which sounds great through headphones using the cab emulation. Without headphones I'm struggling to find a cab that doesn't sound really boxy. If I switch the cab off, it becomes a fuzzy mess and is unusable. Am I missing something or is that just how it is?

Thanks in advance!

asked 06 Sep 2020 at 05:42 PM

Paul Bird (1)
0

votes

1

answer

782

views

I know the origin 20 head has a dummy load for use without a cab and send to a daw through the di out. question is. Can I use the di out or fx send to a slave amp? Not a PA system but a 60 watt tube amp combo. 

edited 05 Sep 2020 at 04:57 PM

John Loboi

asked 05 Sep 2020 at 02:10 PM

John Loboi
0

votes

2

answers

635

views

Hello,

I got a demo unit from a store and would like to know if I have to turn the Origin off before switching the output from low to/mid/high?

Thanks :D 

edited 05 Sep 2020 at 07:03 AM

Kai N

asked 05 Sep 2020 at 07:02 AM

Kai N
0

votes

1

answer

899

views

Hi,

 

My Code 100 amp just dies off in the middle and comes back all of a sudden the volume just fades off for a while and it comes back at will. Even turning off the amp and on does not solve the issue but somehow after a while it becomes normal again. It seems to be some sort of a volume issue... When I crank the master volume knob to full , I hear faint sounds of my guitar. It comes back after a while automatically but then stops again at random. 

asked 04 Sep 2020 at 10:42 AM

Avinav Khanal
0

votes

1

answer

953

views

Just bought a brand new Code 25 amp that was delivered by courier. It sounds great in play but there is a relatively loud constant hum from the speaker from about 5 seconds after switch on. Even with no guitar attached. is this normal?

 Also something is rattling inside when I tilt the cabinet side to side. I'm worried it may have been damaged in transit. Maybe these two issues are related?


Anyone have any thoughts or advice. Not sure I can face sending it back to the seller as although I bought it off a .co.uk website it actually shipped from Poland. 

 

 

asked 03 Sep 2020 at 06:45 AM

Jonathan Howarth
0

votes

2

answers

803

views

On the Gateway app I can playback very little music. I can easily play music with iTunes (Bluetooth) but I am referring to using the playback feature. I have tried to playback 50-60 songs, some of it is purchased but all of it is downloaded. Why do only certain songs work. This is a huge issue for me and one of the main reasons I bought the Code 100H and 212 cabinet. 

asked 03 Sep 2020 at 01:45 AM

Jay Thompson
0

votes

0

answers

943

views

Every time he touched her depths with a well-angled thrust her mind scattered. She could no longer think or even resist. It took all her concentration to not moan and cry out loud.

She tried to balance, but as he pressed in, gripping her hips to slide his shaft into her, she seemed to be almost floating against him. Finally, Anne gave up trying to escape and sagged against him, letting him take her without resistance.

"Good girl," he growled softly in her ear, "take it." His pace quickened, his hand gripping her thigh with a bruising pressure.

He thrust up a couple times, as deep as he could, lifting her feet from the ground. And then just held it there. She felt him pressing into her with every muscle he had, an incredible power about to make her explode.

Anne heard Ben grunt softly and his hips arched again, trying instinctively to get his dick as deep as possible. His cock flexed inside of her once, twice, and then she felt liquid heat spread inside her. He was cumming! Panic gripped Alice again—she was unprotected and he was cumming deep inside her! She would get pregnant. Her college life would be ruined.
https://free1080pporn.com/category/extreme-content-sites/
Ben didn't seem to notice her renewed tension and continued to milk his cock into her depths with short jabs of his hips. And then with a sigh he relaxed, resting his forehead on her shoulder. His dick was still deep inside her, plugging her, holding his cum inside her.

"I'm not on birth control," Anne sobbed under her breath.

"It's okay, baby," Ben whispered into her shoulder, his voice tinged with amusement again, "I'll take care of it. But I don't cum outside sweet girls."

Anne could feel his cock softening by a degree. The discomfort of his cock stretching her virgin pussy to her max was replaced by the trickle of wetness down her thigh. Still, Ben did not shift or pull out of her. She wondered what kind of mess there would be when he did. She felt he wanted to plug her for as long as possible—keep his cock, and his cum—inside his conquest as long as possible.

She wriggled in his lap as Ben's dick softened, hoping to free herself from both his shaft and his grip. Unfortunately, as she did so she realized why he had not pulled out of her. Her wriggling was making him grow hard again.

"Noooo," she groaned.

"Yes," he murmured in her ear, "just relax and enjoy it."

Still disguising his movement with the jostling of the bus, Ben started to flex his hips against her again. With each thrust his shaft hardened. Now slick with both her fluids and his first load of cum, his passage was even easier. The added wetness was also reliving some of the discomfort for Anne. His free hand bobbed down to her vulva again, massaging her clit with his free hand.

Warmth and pressure was building inside Anne's core against her will. The heat spread from her clitoris to her pussy, where the friction of his thick cock was making the pressure build.

She'd masturbated before, of course, but this was something else entirely. She bit her lip and resisted the heat building as best she could. It would be humiliating to cum on a cock that had been forced inside her—and on a bus surrounded by her teammates no less!

Ben's pace with his thrusting was more measured and relaxed now that he'd come once. But his shaft was no less hard. Other than the bruising pain of her cervix when he pressed deep, the discomfort had faded. Now it was slick heat and friction building, building, building...

The orgasm took Anne by surprise, flashing over her like a wave as Ben's fingers circled her clitoris. She turned into his shoulder, pressing her face into his shirt to muffle the moan that escaped her as she shuddered in his firm grip.

She forgot about the crowded bus, and what was going on her for a moment as waves of pleasure diffused her.

What brought her back was the increased urgency of Ben thrusting into her. His free hand was on her thigh again, pulling her back further onto his cock until his engorged glans bumped against her sore cervix. He was going to cum again. But Anne's muscles felt lax and unresponsive after her orgasm, and though she pushed feebly against him he thrust hard up into her pussy one more time and came as deep as he could. She could feel his shaft twitching as he released his load—and the walls of her pussy flexed as if to drain him of every drop.

With a sigh Ben finally relaxed his grip on her. The arm around her waist softened its hold and his other hand was removed from her thigh.

Stunned, Anne didn't move.

Ben's cock stayed inside her until it softened enough to slide out of her in a rush of fluid. Then, thought a word he shifted his gym shorts and tucked away his cock as though it were a harmless tool—all still under the cover of her spread skirt.

Anne was in shock. So she remained where she was on Ben's lap, his cum leaking onto her cotton thong which he'd pulled neatly back into place over her puffy abused vulva. She'd just lost her virginity to the quarterback of her college football team. On a moving bus.
https://www.hotmyfreecams.com
But no one had seemed to notice. Everyone was laughing and deep in conversation or handheld videogames.

She shunted her mind away from her fears of pregnancy, as difficult as that was feeling the slickness of his spunk coating her insides right now. She would have to worry about that later. She didn't understand what Ben had meant that he'd "take care of it." At least it was over now. Right?

edited 26 Oct 2020 at 04:53 AM

Lindsey Cauthen

asked 02 Sep 2020 at 09:12 AM

Lindsey Cauthen
0

votes

0

answers

848

views

OD1 and OD2 getting terrible noise and squealing when Effects loop is engaged. I tried the Boss NS-2 in the loop and it had little effect on it. Loop pedals are TC Electronic Nova Delay, TC Electronic Chorus/flanger, Boss Digital Reverb, Boss NS-2 Noise Suppressor.

Outside the loop is Tuner, Volume pedal, BBE sonic stomp, Rockett Blue note, Wah pedal

I assume its a ground issue interference but no idea how to stop it.

asked 30 Aug 2020 at 07:16 PM

NATHAN STELLMAN
0

votes

1

answer

733

views

When playing, randomly my code 50 will lose volume.  I can restore the volume to normal levels by stepping on a button on the footswitch but then it will cut back out over and over.  How do i fix this?  Is there an update i can do?  I have swapped the cable for the footswitch and my input.  This is incredibly frustrating when trying to get through a rehersal session.  Pleaae help!!!!!

 

asked 30 Aug 2020 at 12:21 PM

eric strohl
0

votes

1

answer

586

views

Hi there,

after some time (months or weeks, I don't no) my Stanmore speaker plays from iPhone X very quietly. My iPhone is on maximum volume and Stanmore too.  But my friends' devices play well. My iPhone plays well on other devices. Where is the problem? I can't find the solution.

Vlado

asked 29 Aug 2020 at 03:58 PM

Vladislav Melos
0

votes

1

answer

773

views

Hello,
Which cable should I use to connect DSL Emulated out with an audio interface: mono, stereo, balanced?
Regards

DSL

asked 29 Aug 2020 at 05:59 AM

Andrei Maksimov
0

votes

1

answer

555

views

So I've had my DSL40C or a few months now, probably around 4 or 5 months, and just this week is has started making loud popping and crackling sounds when it's on and when it does the volume either gets quieter or louder. It has gotten worse and worse as the week went on. First it was just one pop per session but now it's almost unusable how much it pops and interferes with playing. I have no experience with electronics or amps or tubes or whatever so I don't know how to fix it or what the problem could be. What should I do to fix it? Any help is appreciated. Thanks!

 

 

 

 

 
 
 
 
 
 
 
 
 
 

edited 12 Oct 2020 at 04:58 AM

Sanjay Soni

asked 27 Aug 2020 at 07:44 AM

Sanjay Soni
0

votes

1

answer

661

views

I've noticed the outputs 2 & 3 differ, while the specifications on the speakers but the back of the cab (ORI212A) says x2 8ohms. Should I use the 16ohm output? And if not, which of the ohm outputs on the Origin 20H is the ideal one? The 16 ohm, the 8ohm or the 16x2 one?

edited 27 Aug 2020 at 12:52 PM

Emiliano Tapia

asked 27 Aug 2020 at 05:36 AM

Emiliano Tapia
Showing results 1261 to 1280 of 3921
Loading - please wait...