Hi!
I'm not too familiar with impendances and I'm trying to add a monitor speaker to my amp. As mentioned in the title, I'm using Marshall DSL40C combo, and in order to send my signal to my drummer on gigs I need to connect it to an active speaker (Behringer B12D - 8ohms). Currently I have stock speaker in the amp (70/80, 16ohms) but I'm thinking of replacing it with something different.
My question is - what would be the optimal combination (ohm wise) that would work without any danger to the amp? Can I put in the amp 8ohm speaker (amp speaker) in the first 8ohm output and the Behringer monitor on the other, or do I have to use 16ohm speaker (and what output is better to put it in) with the active monitor (changing the monitor is not an option unfortunately)?
Hope I didn't complicate the question too much!
Thanks!
Dear all.
In my code 50 fw 1.41, when I play, I hear noises eg preset 02,03.04,06,07 ... 93. Is it similar to you or do you have a clear sound (no noise)? My guitar Gibson les paul tribiute 2017 and I use cable Fender FG10.
The best Regards
Jaca
I can send a sample to interested persons
Hello!
Have a 6100LM three channel head. The footswitch that comes with the amp is huge - it takes up a large amount of space of my pedal board and I only really use it 3-4 times during a set (swapping from crunch to clean and back, never really use the lead channel). Does anyone know of a smaller replacement footswitch that could do the job? I only really need "channel up/down". I know the head has midi switching but this kind of thing is not my strong point......
Appreciate any help I can get!
Best
Andy
Greetings,
I recieved my Code 100H this week.
Firmware:
(FYI) I attempted the update with a MacBook Pro with USB-C, High Sierra 10.13.1, Chrome Browser. I was able to connect to the Code but the unit would not update. It was stalled on the progress bar on the unit at 0% and on the browser.
(FYI) I attempted the update on a Windows machine and was successful using the update utility and with Chrome Browser. The Code unit shows updating to 1.4.1 but the boot screen shows 1.11?
Bluetooth:
The Code 100H will not connect to any Bluetooth device I have. Windows, Mac, iPhone, or iPad. It does not even show up as a device and never has even out of the box. I am convienced it does not work. Is there a master reset button combo for the unit? I am out of ideas concerning the Bluetooth. It seems like I am not the only one having issues with the Bluetooth. If this can't work consistently I am considering returning the unit. Even the simplest device can connect with Bluetooth and hold a connection. My Code 100H won't even show up as a device to connect to. Please advise.
Hi,
Marshall user since early time, I work also in electronics repairs.
A customer brought me a faulty code 50 power amp. Is there any way to get a new power supply from spare parts to replace it ? I thought replace the original PS with a standard one but the original one gives 2 power supplies: main power an bluetooth power.
In the worst case where we cannot find spare parts, it is possible to get schematics or at least the values of the voltages ?
It will be cool to bring back to life this amazing stuff from a ledgendary brand
Thanks in advance
Hello,
Yesterday I received my Code 50 amp. I played some hours with it and there is 1 thing that i noticed. I play most of the time at home through a headphone because neighbours, and the presets aswell as some own created sets sound really muffed if I add any Cab. I tried diffent Cabs but for me it sounds way clearer without a cab model. I was wondering how this is possible? Did i miss something? When I remove the cab from a preset add lower the presence by 2 it sounds so much better
And when playing through the speaker while gigging with friends, will this difference still be there or is a cab model "necessary" when playing through the speaker?
Greetings, Tom
Has anyone else been having problems finding the amp on bluetooth? Some days my iphone 6 can find it other days it can't. I feel like marshall abandoned the code amps. Does anyone know if they will be releasing a firmware update soon?
I have a CODE 25 that I’m gonna be using to record. The pitch shifter sounds artificial set to an octave down to simulate a bass. I also have a Digitech GNX4. Can a bass be run through the CODE25, or should I use the GNX4’s Whammy effect to do bass?
Hi there,
I am considering buying a 2525H head and I was wondering if bias adjustement would be required on such low wattage EL34 power section.
I know the 'full scale' silver jubilee have a pot for bias adjustment but it seems not to be the case for the mini version.
Please confirm.
ive had a mg30cfx for a couple years now. the amp randomly cuts out every now and then. volume doesnt go over 3.... any ideas??
Hello, i have bought Marshall headphones (Monitor II A.N.C.) and i cant connect them to my laptop via bluetooth (Jack is fine). When i wanna pair them with my phone, there is no problem about that, but problem appears, when i want to connect them and listen to music on my PC. When i open bluetooth app, the headphones are recognized by the PC ( not as headphones, but as phone/other gadget). I have added a picture, how does the situation looks like. You can see, that it recognizes the headphones(as MONITOR II [LE]),but it does not play the music properly. I have tried to reset headphones and PC many times, nothing has helped. Does anyone has the same issue? Can someone help me please? Thank you very much.
Hi. First just to say that a am generally very happy with the CODE50 & it is definitely filling a gap to provide great practice tones with aux input from LickLibrary & my son's vdrum set to jam along! I have a coupe of items I wanted to put out there to the forum:
So the fizz - has anyone else noticed a very high end (treble) fizz or harsh crackle to the tone on most 'unsaturated' presets? It almost sounds like a digital clipping at the high end of the spectrum to my ear. It is definitely worse when using my 2015 Gibson Les Paul Less+ (which has the brass zero fret nut) like the amp is reacting to some of the pronounced higher frequencies on this guitar but it is also noticable with other guitars using a standard nut material.
The cabinet resonance I guess is due to the relatively light weight MDF that the cab is constructed of which appears to vibrate a little too readily has the master gets to about 1.5 / 10. I have dabbled a little with the resonance / presence settings under the speaker cab which has helped control it a little but I would be interested in any other ideas for reducing that boooom that can wash out the tone. I do have a 4 ohm Celestion G12T-75 from a long broken Marshall SS 50w combo which I am thinking of trying out - it is a physically heavier speaker than the CODE one pre-installed but I don't think structurely this will be a problem for the cabinet. I would appreciate any other ideas - anyone added noise suppression foam to the inside of the cab (as used in noisy PC towers) or anything else?
Cheers all.
Hello,
I have a problem with connecting a TC Electronics G-System to my JVM 410HJS. The way described in the manual does not work. Preset switching is not possible. The Midi channels have been matched to Ch 1 according to the manual but programming is not working. The JVM doesn't receive messages (no fast blinking). Does the G-System not send useable midi data at all?
Thank you in advance!
Guido
bonjour je me présente christopher , je viens d'acheter un marshall code 50 et je voudrais savoir si quelqu'un peux m'aider car je veux enregistrer le son de mon ampli pour pouvoir mettre mes enregistrements sur une clé usb par la suite et écouter si quelqu'un peux m'aider ce serais cool merci(christopher)
Is the speaker in the Code 25 a full range speaker and if not, will there be clipping issues streaming music into the amp while playing my guitar?
Thanks
Hey there! I have just acquired a DSL 401 and am searching for a manual. Anyone have an idea of where I might find one? Thanks.
Mi Code 25 ha dejado de funcionar con mi PC para grabar. Cuando lo conecto por USB ya no lo detecta (error 43 ) interface no reconocido. No se porque ahora no lo reconoce.
Hay alguna forma de solucionar?
Hi,
I recently bought a Marshall DSL20HR head and a Marshall 1936 Lead 2x12 cab.
The head has a cab emulator out, so I hooked it up to my audio interface and was playing through my pc monitors. I turned up the volume and gain on the ultra gain channel and a strange buzz/noise came from the head when I would strum a chord or pick a note.
I only noticed this because I had the level on my interface low as I was just testing the cab emulator out. I have alos tested this with the head not plugged into either my interface or the cab and still get a strange noise/buzz.
As this is my first valve head I'm not sure if this is just something that happens when you turn up the volume and gain - as the amp is being pushed harder, or if there is a fault with the head and I need to take it back to the shop I purchased it from.
I will link below some video of the problem. The first video sounds worse than it is as I put my phone directly on top of the head as I play. It's not the signal noise from the amp that I am worried about, it's the rattle when I strum chords or hit notes...
https://www.youtube.com/watch?v=CWTiPugPfZ4
Any help would be greatly appreciated, I'm probably just over reacting, but it would be good to get some reassurance.
Thanks! \m/
Are there instructions on how to bias Origin 50 power tubes? A schematic?