Questions
Showing results 141 to 160 of 3373
0

votes

4

answers

2.6k

views

Is there any way to reduce the wattage on the code 50.  50 watts is tremendously loud and I can not get the "sweet spot" with out rattling the windows.  I know the alternative is the CODE 25 but I am hesitant with the 10" speaker.   Any suggestions?

Many Thanks!!

asked 31 Oct 2016 at 01:53 PM

CHRIS CHARTERS
0

votes

1

answer

2.6k

views

I broke out my old mg 30dfx and bought the PEDL-90008 for it but nothing happens when I plug it in. Is that the correct footswitch for my amp?

asked 26 Sep 2018 at 05:39 PM

John Sandbrook
1

vote

1

answer

2.6k

views

Hallo

Habe mein Galaxy s5mini mit dem Code 50 Gekoppelt und kann auch Musik abspielen.

Auf die Gateway App kann ich allerdings nich zugreifen.

Ich Scane for Amps aber die Meldung Not Conneceded erschein immer wieder auf dem Display.

Habe die App schon neu Installiert,aber leider ohne Erfolg.

Wo liegt der Fehler?

Danke für eine Rückmeldung.

MfG.

Peter

asked 17 Feb 2017 at 03:28 PM

Peter Niederer (1)
1

vote

1

answer

2.6k

views

Hello,

I've noticed that there is rattling/jangling coming from the amp (not the speaker) when playing notes between low  A and C and their respective octaves above. It sounds like it is coming from the EL34 valves - is this due to the way that they are mounted without spring dampers? They have not gone microphonic as far as I can tell, and are otherwise performing as expected, so I feel this is more a mechanical issue with the chassis/mounting, or it's just an undesirable characteristic of the valves themselves. What I'd ideally like to know is, do all Origin 20Cs do this or is this the first anyone has heard about this?

I've removed every external variable there could be, moving the amp to another location and isolating it from floor vibrations in the studio. I've taken the 'amp' out of the cabinet so that I could lightly tap the valves, and check the screws around the supports are not loose. You can generate the rattle (or very similar) just by tapping lightly with the handle of a screwdriver, on both valves. This is what I was expecting if it was just physical vibrations from the speaker causing them to rattle in sypmathy. The rattling sound does not get amplified, so it's not in the audio path.

It's enough to be offputting when tracking/practicing in the studio unless pushing out really high volume so that you can only hear the guitar. I play fairly clean a lot of the time so it is more obvious under those conditions.

Would really appreciate some advice. If the answer is, "It's the same for all and there's not much that can be done..." then ok, I just need to know. That said, I spotted there was some sort of similar issue perhaps on Class 5 amps that a kit was developed for to resolve? I may have misunderstood though.

If there is any further mechanical troubleshooting to be done then please let me know. I wouldn't want to void the warranty status if possible. For what it's worth, I'm a systems and support engineer for a large format mixing console company, so I'm competent enough to poke around as required... just figured someone may have alreday solved this one before I carry on!

Kind regards,

Ed

 

edited 09 Sep 2018 at 11:28 AM

Edward Arnold (1)

asked 09 Sep 2018 at 11:27 AM

Edward Arnold (1)
17

votes

1

answer

2.6k

views

Any plans to release a Windows desktop app for managing presets via USB connection? I'm not an Android or iPhone user. Editing via amp panel is ok, but somewhat tedious. 

 

asked 10 Sep 2016 at 12:45 PM

Peter Hauschild (17)
0

votes

1

answer

2.6k

views

I've had a DSL40c for a year or two, and it worked fine until a few months ago.  While playing, the sound cut out and there was a slight burning smell.  I replaced all tubes and pre amps and it worked fine in testing, but then did the same thing when I got it home.  Repair guy thought it was a pre amp issue so changed those out again.  It worked fine in testing, and then did the same thing again when we got it home.  This time when we turned it back on, it would work, but sound would go up and down sporatically with some popping and crackling.  Replaced the tubes again, and it worked fine for an hour.  Then the sound cut out, and we noticed it would not switch channels.  After turning it off and letting it cool down, we turned it on again and it worked fine and channels would change.  I'm not sure what to do at this point.  My weekend routine of dropping the amp off and then getting it back (with high-hopes) has gotten old.  The problems have occurred while plugged straight into the guitar, as well as through a pedal board.  Also, the problems have occurred via multiple power sources in different locations (i.e. not always through the same wall socket).  

Thanks for your help

asked 17 Nov 2017 at 02:28 PM

Ron Sutek
0

votes

1

answer

2.5k

views

asked 23 Dec 2017 at 04:01 AM

Garry Ramsey
0

votes

2

answers

2.5k

views

Hello, 

i switch through my presets with  the Marshall PEDL-91009, however, this pedalboard only has 3 switches and a bank switch, however i would like to have a pedalboard with more than 3 preset switch button for faster recall ... is there a solution (maybe via MIDI) , or a compatible footswitch that i am unaware of? 

asked 21 Mar 2018 at 04:47 PM

Daniele Varra
0

votes

2

answers

2.5k

views

Hi, I got my Code 100h today and I want to use my FX board (Line 6 Firehawk FX) with the FX loop of the code. I used the 4-cable method and triple checked that the wiring and routing is correct... 

Guitar to the input of the firehawk.  FX send of the firehawk to the guitar input of the Code. FX send of the Code to firehawk FX return. Line output of the firehawk to the Code‘s FX return. Placed the FX loop in the firehawk routing.

However, the Code‘s FX loop doesn‘t seem to work. No FX from the firehawk. I cant find a mix option or FX loop activation within the Code. 

Any ideas?

Best,

Arne.

asked 13 Dec 2017 at 09:45 PM

Arne Buxbom (1)
0

votes

1

answer

2.5k

views

What should i replace my code 50 speaker with?

 

asked 04 Apr 2018 at 04:52 AM

Steven Dombrosky
0

votes

2

answers

2.5k

views

When I try to load preset from code to pc, there is:  Error while decoding sysex: Error_Bad_Device_ID.  How can I fix it?

asked 14 Dec 2017 at 05:31 PM

Ilya Bychkov
0

votes

1

answer

2.5k

views

For those who gig with their marshall codes! Do you use any external pedals? Not so much wah or additional effects more along the lines of a booster pedal? 

Great to hear what people’s set ups are like! 

asked 09 Oct 2017 at 07:13 PM

luke shettle (2)
0

votes

2

answers

2.5k

views

Hi.

I am using a CODE 50 and i am happy.

My experience is very good, of course this is not a HIGH END amp neither the real ones that CODE emulated, but for the price its an amazing amp, and for what i need, playing at HOME at lower volumes with quality and flexibility. Its a very nice solution to have in a very easy and cheap way some historical Marshall amps tones, and again this is not the REAL AMPS of course, but the quality and the price are very very GOOD.

I am using tradicional pedals running in front of the amp, due the absence of effects loops i am even running delay in front. The only effect that i am using from the CODE is the reverb.

Now comes one of the best thinks for me, i am using Marshall Footswitch, and i create 6 banks of presets for my taste :-) please see the photo. With this i can have imediatly  diferent amps with the presets that i made, i event put some hang tags identifiyng the names of the presets. 

To record i use 2 SM57, and my main guitar is fender 60 anniversary commemorative stratocaster.

I have sereval other amps, all valves, but again to play in home, record, jam, and so on, this setup is one of the best that i done.

Keep rock in a free world !!

Cheers.

Miguel

 

asked 21 Jul 2017 at 12:55 PM

miguel souto (1)
0

votes

2

answers

2.5k

views

Is there a capability to control the Code 25 via USB MIDI???

 

Thanks in advance...

asked 16 Nov 2016 at 01:46 AM

Joe Ruggiero
1

vote

3

answers

2.4k

views

Hello Group! I am about to receive my new Marshall Origin 50 watt head on Monday (March 5th). I'm excited as hell! I was looking for a 50 watt platform to go through my hand made Tweed 1X12 cab with a EVM12L that I built three years ago. I just had a bad expierience buying a Fender Bandmaster VM with a blown digital effects board. The repair facility could not obtain this part from anywhere. I wound up returning it to Reverb.com and was out all the repair money, two 5 hour round trips and $55 to ship it back. I was really devistated until (by accident) I stumbled onto this Origin series amp. I owned a few Marshalls in my day but this one really caught my eye. My question to you guys is this; normally amps come through with pretty basic tubes. I have no idea what the Origin comes with as far as stock tubes. Being the perfectionist that I am and the gear freak I've always been, I'm already wanting to upgrade the 12AX7's (EC83s) and the EL34s. Any suggestions as to a good upgrade or are the stock tubes pretty good? Thanks guys (and gals)

asked 01 Mar 2019 at 12:23 AM

Lonnie Perry (1)
5

votes

8

answers

2.4k

views

Is there any chance to rectify the way the master volume pot on the CODE 50 behaves via a firmware update? Or is it a malfuncion on my device?

From 0 to 1 there's, well, nothing. No sound. Above that, there's about two millimeters of neighbour friendly bedroom level followed by an abrupt kick in the guts.

Thanks in advance.

 

asked 08 Feb 2017 at 04:56 PM

Sebastian Opara (5)
37

votes

3

answers

2.4k

views

Hi, is it possible to see the Amps I have registered on my profile?

Cheers, Andy

asked 29 Jun 2016 at 06:12 PM

X X (37)
0

votes

2

answers

2.4k

views

Je n'arrive plus a faire reconnaître mon téléphone dans l'appli gateway Marshall

Le téléphone se connecte via bluetooth mais l'appli ne me donne pas accès au réglage / pas de connection

Je ne plus piloter mon ampli avec le téléphone alors que cela fonctionnait parfaitement auparavant.

J'ai fait une mise a jour de l ampli par USB 

Quelqu'un rencontré le même problème ?

Merci pour votre réponse.

Éric.

asked 11 Nov 2019 at 02:50 PM

JACKOWIAK Eric
1

vote

2

answers

2.4k

views

Hello guys I’m building my pc and I wanted the most beautiful and strong speaker for both my pc and my living room. Which one do you suggest ?

edited 24 Jun 2019 at 07:50 AM

Marshall

asked 02 Dec 2018 at 01:10 PM

mickey holland
0

votes

2

answers

2.4k

views

Hi

No response when I tirn on mu Stanmore speaker. No lights, no sound, nothing. 

What can I do to fix it?

asked 01 Sep 2018 at 03:18 PM

Pål Haugerud
Showing results 141 to 160 of 3373
Loading - please wait...